CS Paper Radar

Differentiable Iterative Learning Control for Black-Box Position-Commanded Manipulators

Mohammed Al-Ghaili, Yakoop Qasim, Hassan Almubarak

cs.RO eess.SY ·submitted 2026-10-31 19:41 UTC · v1

Abstract

High-accuracy repetitive tracking is challenging for position-commanded manipulators whose low-level controllers are inaccessible, while constrained model-based iterative learning control (ILC) can require substantial manual parameter tuning. We present Differentiable Iterative Learning Control (Diff-ILC), an online bilevel framework that adapts the parameters of a constrained ILC update between physical robot executions. A closed-loop differential model is identified once from paired smooth perturbations and subsequently kept fixed. At each trial, a constrained quadratic program computes a feasible command correction, while a real-anchored next-trial prediction defines a task-level objective. Hypergradients are obtained by implicitly differentiating the locally active KKT system, enabling multiple computational parameter updates without additional robot executions. Experiments on a 6-DoF DOBOT CR3 across unseen planar and three-dimensional trajectories show substantially faster physical-trial convergence than fixed-parameter model-based ILC. Across the four primary trajectories, after only two trial-to-trial updates, Diff-ILC achieves 78.8% and 76.4% lower mean joint-vector and Cartesian RMSE, respectively, than fixed-parameter model-based ILC.

Closest papers

Nearest neighbours by meaning across the whole index.

Reinforced Iterative Learning Control for elastic joint arms: Guaranteed cross-trajectory generalization under model uncertainties

cs.RO ·2026-10-20 ·Yuri De Santis, Michele Pierallini, Franco Angelini, Manolo Garabini
published similarity 0.76
Abstract · Accepted for publication in Control Engineering Practice, 2026. 16 pages, 10 figures

Trajectory tracking for compliant robots is challenging due to nonlinear dynamics and modeling uncertainties, often requiring learning-based methods to avoid explicit parameter identification. Iterative Learning Control (ILC) ensures theoretically high precision and preserves the passive compliance of the robot. However, traditional ILC requires a separate learning phase for each new trajectory. Conversely, Reinforcement Learning (RL) generalizes to new trajectories, but practically suffers from high sample complexity and limited tracking precision. This work proposes Reinforced Iterative Learning Control (RILC) that combines the strengths of both approaches to achieve fast adaptation and guaranteed tracking convergence across diverse trajectories. By establishing a concurrent coupling between the two controllers, RILC overcomes the high initial errors and slow adaptation of traditional ILC, enabling high-performance tracking from the very first trials. In this architecture, ILC provides high-quality samples, while RL contributes as a generalizing best-effort policy across iterations. Additionally, a theoretical proof is presented to show that the RL component preserves ILC stability and, under specific conditions, can also reduce the error bound asymptotically. The efficacy of this framework is demonstrated through simulation and experiments on an underactuated 4-degree-of-freedom serial elastic robot using different trajectories and modeling mismatches.

0.39

Beyond Policy Alignment: Closing the Planning-Learning Loop for Robot Control with Learned World Models

cs.RO ·2026-09-30 ·Kowndinya Boyalakuntla, Yuhan Liu, Abdeslam Boularias
benchmark similarity 0.71
Abstract · 8 pages

Planning with learned world models combines online trajectory optimization with learned value and policy functions for high-dimensional control. Because the planner determines the experience used for learning, while the learned critic and actor in turn score and propose future plans, planning and learning form a closed feedback loop. TD-MPC is a prominent instance of this design. Recent policy-constrained variants strengthen one part of the loop by aligning the learned policy with planner behavior. We introduce PL-MPC (Planning-Learning MPC), which additionally modifies critic supervision and planner terminal-value estimation. Hybrid multi-step TD targets expose critic updates to more realized rewards before bootstrapping; disagreement-aware terminal estimates reduce the influence of uncertain critic values during MPPI planning; and return-weighted actor distillation emphasizes planner-executed actions from high-return episodes. The world-model architecture and MPPI optimizer are otherwise unchanged. On HumanoidBench, the largest gains occur on \texttt{balance-hard}, where Total Average Return (TAR) increases from $98\pm18$ to $387\pm255$, and \texttt{hurdle}, from $199\pm13$ to $466\pm200$; performance across the broader benchmark remains task dependent, and PL-MPC remains competitive on DMControl. Controlled ablations show different component interactions across the two tasks. We further demonstrate zero-shot sim-to-real transfer on wrench-nut alignment with a 7-DoF KUKA IIWA14, obtaining higher observed success than TD-M(PC)^2 on the training object size and two unseen sizes. Code and data will be available at: https://pl-mpc-humanoid.github.io.

0.33

ManiLadder: Benchmarking Robot Manipulation Through a Categorized and Multi-Difficulty Level Task Ladder

cs.RO ·2026-11-12 ·Chongkai Gao, Jieao Shi, Zhaoyu Mu, Yudi Lin, Xuanwei Liu +12 more
benchmark similarity 0.69
Abstract

Recent advances in robotic manipulation have enabled increasingly complex and dexterous behaviors, yet existing benchmarks still focus on simple pick-and-place tasks and lack a systematic framework for measuring progress in robot learning along the axis of task difficulty. We present ManiLadder, a large-scale and organized simulation benchmark for robotic manipulation. ManiLadder contains 112 carefully designed tasks stratified into 4 difficulty levels, with 8 categories in each level, spanning rigid-body and deformable-object manipulation, single-arm and dual-arm settings, and gripper and dexterous-hand end-effectors. To calibrate difficulty, we fix the data amount the same for every task and use a unified flow- matching imitation learning policy under the same training and evaluation protocols, then use its evaluation success rate as an operational empirical difficulty signal. All tasks are iteratively refined until they fall into target difficulty ranges, which are then verified across different random seeds, policies, and agentic learning systems. We further analyze the task properties, compare different policy performances and training settings, analyze task transfer and data scaling behaviors, and conduct real-world experiments showing that the designed tasks preserve their difficulty ordering beyond simulation. ManiLad- der provides a calibrated ladder for measuring, comparing, and advancing robotic manipulation capabilities. More results are available at https://maniladder-benchmark.github.io/.

0.11

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.68
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

An Empirical Study of Reinforcement Learning for Keypoint Positioning of Deformable Linear Objects

cs.RO ·2026-11-05 ·Vinay Rodrigues, Sara Zeynalpour, Gokhan Solak, Sebastian Hjorth, Arash Ajoudani
similarity 0.68
Abstract

Deformable linear object (DLO) manipulation is challenging because high-dimensional configurations, nonlinear contact dynamics, and diverse material and geometric properties produce a broad range of object responses that are both difficult to model and data-intensive to learn. This work studies reinforcement learning for planar manipulation of a one-end-grasped DLO, focusing on training efficiency, observation design, robustness, and zero-shot sim-to-real transfer. We compare three Proximal Policy Optimization training stacks and find that the GPU-parallel MuJoCo Playground stack enables faster convergence and more consistent performance than CPU-based alternatives under the same wall-clock budget. Relative keypoint observations and an asymmetric actor-critic formulation further improve learning efficiency. Policies trained with observation noise, delay, domain randomization, and disturbances achieve simulation success rates of 96.4% for single-point tracking, 98.0% for disturbance recovery, and 88.8% for two-point tracking. Using markerless RGB-D keypoint estimation, the policies transfer without real-world fine-tuning, succeeding in 9/10, 10/10, and 8/10 physical trials, respectively.

0.09

Multi-CONDOR: Learning Multistable Motion Primitives from Demonstration

cs.RO cs.AI ·2026-11-16 ·Gabriele Giuseppe Di Marzo, Mariano Ramírez Montero, Maximilian Stölzle, Rodrigo Pérez-Dattari, Cosimo Della Santina
similarity 0.68
Abstract

Dynamical-system-based motion policies provide a framework for learning reactive robot motions with stability and convergence properties. Many manipulation tasks, however, admit several distinct goals or a continuous set of acceptable outcomes, requiring motion primitives that preserve these alternatives. Accommodating both goal structures within a unified framework with continuous, autonomous dynamics remains an open challenge. We propose a CONDOR-based framework, multi-CONDOR, for learning motion primitives with either multiple discrete attractors or a continuous attracting goal contour. The approach combines imitation learning with losses that encourage agreement between the learned task dynamics and latent reference systems encoding the desired attraction structure. We provide a Lyapunov-based analysis of the convergence properties of the learned motion dynamics. We evaluate the framework on simulated benchmarks with discrete goals, qualitative examples with continuous goal contours, and robotic grasping experiments. In simulation, multi-CONDOR reduces trajectory RMSE by approximately 72% compared with separately learned single-goal motion primitives selected by a state machine. For tasks with two and three goals, respectively, it reduces the fraction of evaluated initial states ending outside the goal tolerance from StableNODE's 0.31% and 7.29% to 0% in both settings. Experiments with a Franka Emika robot arm demonstrate successful grasping of a container by either of its two handles using motions learned from demonstrations. Together, these results show multi-CONDOR combines motion reproduction with the flexibility to converge to alternative valid outcomes.

0.25

Learning Loco-Manipulation From SMPC Demonstrations With Sparse Offline-to-Online RL

cs.RO cs.AI ·2026-08-12 ·Martin Schuck, Maks Sorokin, Simone Manni, Duy Ta, Angela P. Schoellig +3 more
published similarity 0.68
Abstract · CoRL 2026 Camera-ready version

Integrating locomotion and manipulation is essential for robot autonomy, but scaling standard Reinforcement Learning (RL) to complex tasks is severely bottlenecked by the slow, manual process of dense reward shaping. To bypass this limitation, we leverage Sample-based Model Predictive Control (SMPC) entirely in simulation as an automated, rapidly tunable expert to generate massive offline datasets. Because this data solves the fundamental exploration problem, we can train an off-policy RL agent using purely sparse task rewards, drastically reducing the time required to learn new skills and eliminating the need for manual tuning. Integrating this high-level agent with a low-level dynamic stability controller yields more optimal behaviors that strictly align with true task objectives, ultimately allowing the learned policies to surpass the original optimal control teacher. We validate the robustness of this sim-to-real framework by successfully deploying complex loco-manipulation skills across different morphologies, including an arm-equipped Spot quadruped and a G1 humanoid.

0.49

Planning to Learn: Real-Time Robust Adaptive Control on the GPU with Guaranteed Future Learning

cs.RO cs.LGeess.SYmath.OC ·2026-10-14 ·Anutam Srinivasan, Siddhant Panse, Glen Chou
similarity 0.67
Abstract

Robust adaptive control is vital for keeping robots safe while actively reducing uncertainty in unfamiliar settings. However, traditional methods are often conservative since they fail to account for guaranteed future parameter learning during planning and struggle to scale to high-dimensional systems. In this work, we present A-SLS, a learning-aware robust adaptive model predictive control (RAMPC) framework based on system-level synthesis. A-SLS forecasts future parameter uncertainty and preserves correlations between process disturbances, parameter error, and estimate updates to construct tight, guaranteed reachable sets that account for future information gain. We also develop a GPU-accelerated A-SLS solver to enable real-time performance. Across nonlinear robotic systems, A-SLS reduces reachable-tube conservativeness, maintains real-time performance, and scales to whole-body control for a quadruped with 61 states, 8 uncertain parameters, and 12 control inputs. We further demonstrate the approach on hardware, where a physical Crazyflie drone learns an uncertain dynamics parameter online to stabilize on the fly.

0.26