CS Paper Radar

Residual Deep Reinforcement Learning-Based Computed Torque Control for a Cable-Driven Lower-Limb Rehabilitation Robot under Disturbances and Parametric Uncertainties

Mohammad-Hossein Fakouri, Ali Keymasi-Khalaji

cs.RO eess.SY ·submitted 2026-08-27 07:29 UTC · v1

Abstract

Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian diagnostics. Across the evaluated conditions, the residual controller improves tracking and disturbance rejection relative to computed torque control while preserving the interpretable model-based command structure and satisfying the reported feasibility checks in the representative evaluation. Broader tests indicate that tracking improvements can persist beyond the representative case while also exposing trajectory-dependent constraint limitations. These results support bounded residual learning as a practical robustness-enhancement strategy for simulation-based rehabilitation robot control and motivate further constraint-aware and experimental validation.

Comment
32 pages, 24 figures, 13 tables. Preprint

Closest papers

Nearest neighbours by meaning across the whole index.

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.70
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.45

LETS: Low-Overhead External-Torque Sensing for Force-Feedback Bilateral Teleoperation

cs.RO ·2026-10-10 ·Zonghao Guo, Dongchen Guan, Yubo Wang, Peng Yang
similarity 0.66
Abstract · 8 pages, 7 figures

Bilateral teleoperation with force feedback is becoming increasingly important, and the quality of external-torque estimation is critical to this process. However, manufacturer-provided disturbance-torque estimates on commercial robotic arms are often inaccurate, while the use of end-effector force/torque sensors adds cost and payload. We propose LETS, a physics-guided learning approach that assigns rigid-body dynamics to recursive Newton-Euler inverse dynamics and reserves learning for only the robot-specific residual. LETS uses only the robot's URDF model and joint feedback, deliberately excluding control commands and thereby decoupling external-torque estimation from control-command inputs. It trains on 12 minutes of free-motion data in under one minute, without requiring a dedicated end-effector six-axis force/torque sensor. In bilateral teleoperation, LETS achieves real-time external-torque estimation that enables stable force feedback. Its free-space error is 69% lower than the manufacturer-provided estimate, substantially reducing coupled oscillations between leader and follower; its contact error is 28% lower, yielding more accurate haptic feedback.

0.19

SwingRL: Adaptive Observation Reinforcement Learning with World-Model Prediction for Cable-Suspended Hoisting Control

cs.RO ·2026-09-27 ·Guangming Wang, Xiaoyu Zhang, Yucheng Xin, Wanli Ma, Jiucai Liu +6 more
similarity 0.66
Abstract

Cable-suspended hoisting is widely used to move heavy or bulky payloads that cannot be handled conveniently by rigid pick-and-place systems, for example in crane-assisted construction. Robotic hoisting using flexible cables is challenging because payload motion is underactuated, external disturbances vary, and delayed or lost visual observations can make the perceived payload state stale at control execution. These effects are particularly critical during precise insertion of a suspended payload's sockets onto rebar pins, which is a very common task in construction environments. We present SwingRL, a residual reinforcement-learning (RL) framework that combines an age-aware world model, a classical anti-swing prior, and a recurrent residual policy to address two coupled problems: stale feedback and uncertain dynamics. The world model propagates the newest received payload observation to the current control step using the executed commands, providing a time-aligned state estimate under delayed and lossy sensing. The prior supplies nominal tracking and swing damping. The residual policy learns bounded corrections to the prior rather than the complete control law, compensating for system-parameter variation, external disturbances, and remaining state-estimation errors. We evaluate SwingRL against classical and learning-based baselines across a cumulative difficulty ladder covering system-parameter variation, wind disturbance, degraded sensing, and strong gusts. Under the most difficult setting, SwingRL achieves 69.5% strict and 77.3% broad success, exceeding all baselines by at least 60 percentage points, respectively. World-model ablations support the role of time-aligned state estimation in maintaining insertion success as observation loss increases. Finally, without real-robot fine-tuning, SwingRL achieves 90% success on the physical rig.

0.20

Enhancing Sim2Real Transfer for Torque-Controlled Robots through Real2Sim Dynamics Estimation and Reinforcement Learning

cs.RO eess.SY ·2026-08-23 ·Davide Bargellini, Alex Pasquali, Andrea Govoni, Riccardo Zanella, Gianluca Palli
published similarity 0.66
Abstract · 6 pages, 8 figures. Presented at the 2026 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2026)

Transferring reinforcement learning policies from simulation to Real-World robots remains a major challenge, particularly when dealing with low-level torque control, where even small modelling inaccuracies can lead to unstable or unsafe behaviours. In this work, we propose a Real2Sim2Real pipeline that improves Sim2Real transfer for torque-controlled robotic arms by combining trajectory matching, parameter optimization via genetic algorithms, and domain randomization. Using the 7-DOF Franka Emika Panda robot, we first identify friction, inertia, and gravity compensation parameters by minimizing the error between real and simulated joint trajectories. These calibrated dynamics are then used to train a TQC-based reinforcement learning agent in simulation. The trained policy is evaluated in both Gazebo and MuJoCo environments, and finally deployed on the real robot. Our results demonstrate a significant improvement in tracking accuracy and policy robustness after parameter tuning, with smooth policy transfer from simulation to the Real-World across multiple target-reaching tasks. This work highlights the effectiveness of accurate physical modelling in enabling stable and generalizable torque-based reinforcement learning policies.

0.39

Reinforced Iterative Learning Control for elastic joint arms: Guaranteed cross-trajectory generalization under model uncertainties

cs.RO ·2026-10-20 ·Yuri De Santis, Michele Pierallini, Franco Angelini, Manolo Garabini
published similarity 0.66
Abstract · Accepted for publication in Control Engineering Practice, 2026. 16 pages, 10 figures

Trajectory tracking for compliant robots is challenging due to nonlinear dynamics and modeling uncertainties, often requiring learning-based methods to avoid explicit parameter identification. Iterative Learning Control (ILC) ensures theoretically high precision and preserves the passive compliance of the robot. However, traditional ILC requires a separate learning phase for each new trajectory. Conversely, Reinforcement Learning (RL) generalizes to new trajectories, but practically suffers from high sample complexity and limited tracking precision. This work proposes Reinforced Iterative Learning Control (RILC) that combines the strengths of both approaches to achieve fast adaptation and guaranteed tracking convergence across diverse trajectories. By establishing a concurrent coupling between the two controllers, RILC overcomes the high initial errors and slow adaptation of traditional ILC, enabling high-performance tracking from the very first trials. In this architecture, ILC provides high-quality samples, while RL contributes as a generalizing best-effort policy across iterations. Additionally, a theoretical proof is presented to show that the RL component preserves ILC stability and, under specific conditions, can also reduce the error bound asymptotically. The efficacy of this framework is demonstrated through simulation and experiments on an underactuated 4-degree-of-freedom serial elastic robot using different trajectories and modeling mismatches.

0.39

LocoWM: High-Precision Locomotion through World-Model-Guided Residual Adaptation

cs.RO ·2026-09-30 ·Zijie Zhao, Shengqian Chen, Xiaoxu Wang, Han Jiang, Yuanheng Zhu +1 more
code/data similarity 0.65
Abstract

High-precision locomotion combines motion-command tracking with precise regulation of task-relevant physical states, enabling robots to interact reliably with their surroundings during motion. Joint end-to-end optimization can leave precision objectives insufficiently optimized, while reactive residual control adjusts actions only after deviations become observable. We present \textbf{LocoWM}, a world-model-guided preactive residual adaptation framework for high-precision locomotion. A base policy provides command-following locomotion, while an action-conditioned world model predicts a sequence of future physical states from proprioceptive history and the proposed base action. A residual adapter conditions on this predicted sequence to generate additive action corrections that compensate for anticipated deviations. Two-stage training first learns locomotion and action-conditioned dynamics, then freezes both modules while training the adapter, separating locomotion acquisition from precision adaptation. Experiments spanning terrain leveling, acceleration compensation, and push recovery demonstrate improved control precision and disturbance robustness over end-to-end and reactive residual baselines. Demos and code are available at: https://zhaozijie2022.github.io/LocoWM

0.32

Joint-Health-Aware Reinforcement Learning for Robust Robot Control Under Actuator Degradation

cs.RO cs.CV ·2026-10-30 ·Haifa Zhang, Yijing Wang, Zhiqiang Zuo
similarity 0.65
Abstract

Robots deployed in unstructured environments are susceptible to actuator-authority degradation, which reduces the effective control authority of individual actuators and can cause reinforcement learning policies trained under nominal dynamics to fail. Existing robustness approaches rely on discrete fault labels, broad domain randomization, or global latent variables, often without explicitly modeling continuous per-joint residual actuation capability. We propose a joint-health-aware reinforcement learning framework for robust robot control under simulated actuator degradation. Our framework encodes actuator condition in a continuous joint-health vector and models degradation as multiplicative attenuation of executed actions. A dedicated HealthNet estimator infers per-joint health from recent observations and actions, allowing the policy to redistribute control effort across healthy and degraded joints. We evaluate the method on Walker, Go2, Cassie, and Panda-based ManiSkill manipulation tasks under diverse degradation masks and severity levels. The method outperforms nominal and degradation-trained no-health baselines on the main evaluated metrics. Relative to the nominal baseline, task-level locomotion returns improve by up to 250.1\% and manipulation success rates by up to 15.2 percentage points; in the high-degradation Cassie group, return increases from 3.94 to 40.50 (+928.0\%). Ablations support the contribution of per-joint health estimation, action-degradation modeling, and health-conditioned control.

0.14

Force-Aware Reinforcement Learning with Hybrid Sensorless Force Estimation for Wheeled-Legged Loco-Manipulation

cs.RO ·2026-09-12 ·Xuanqi Zeng, Jiaming Wang, Tianlin Zhang, Lingwei Zhang, Botian Xu +3 more
similarity 0.64
Abstract · 12 pages, 8 figures, 2 tables

Force-controlled loco-manipulation requires a whole-body policy to coordinate locomotion and arm motion while regulating end-effector interaction forces. This is challenging under floating-base dynamics and changing support contacts, particularly when end-effector force/torque sensing is unavailable for control. This paper presents a force-aware reinforcement learning approach with hybrid sensorless force estimation for wheeled-legged loco-manipulation. The proposed method provides a structured estimate of the end-effector force as an explicit policy observation, enabling force-guided contact behavior without using an end-effector force/torque sensor for control. The force estimate is obtained by combining generalized momentum observation, contact-constrained wrench projection, and temporal residual learning: the model-based components extract the physically structured part of the whole-body disturbance, while the residual network compensates the remaining motion-dependent bias. The estimated force is integrated into a mode-conditioned whole-body policy with an axis-wise force/position selector, allowing free-space motion, pure force regulation, and hybrid force/position control within one controller. Simulation results demonstrate improved sensorless force estimation and force-control performance. Hardware experiments further validate the proposed controller through quantitative valve-rotation and hybrid wiping evaluations, together with force-guided door opening and zero-force human-guided motion on a real wheeled-legged platform.

0.38