CS Paper Radar

SwingRL: Adaptive Observation Reinforcement Learning with World-Model Prediction for Cable-Suspended Hoisting Control

Guangming Wang, Xiaoyu Zhang, Yucheng Xin, Wanli Ma, Jiucai Liu, Yunxiang Ma, Joe Ingham, Haibing Wu, Yixiong Jing, Olaf Wysocki, Brian Sheil

cs.RO ·submitted 2026-09-27 00:34 UTC · v1

Abstract

Cable-suspended hoisting is widely used to move heavy or bulky payloads that cannot be handled conveniently by rigid pick-and-place systems, for example in crane-assisted construction. Robotic hoisting using flexible cables is challenging because payload motion is underactuated, external disturbances vary, and delayed or lost visual observations can make the perceived payload state stale at control execution. These effects are particularly critical during precise insertion of a suspended payload's sockets onto rebar pins, which is a very common task in construction environments. We present SwingRL, a residual reinforcement-learning (RL) framework that combines an age-aware world model, a classical anti-swing prior, and a recurrent residual policy to address two coupled problems: stale feedback and uncertain dynamics. The world model propagates the newest received payload observation to the current control step using the executed commands, providing a time-aligned state estimate under delayed and lossy sensing. The prior supplies nominal tracking and swing damping. The residual policy learns bounded corrections to the prior rather than the complete control law, compensating for system-parameter variation, external disturbances, and remaining state-estimation errors. We evaluate SwingRL against classical and learning-based baselines across a cumulative difficulty ladder covering system-parameter variation, wind disturbance, degraded sensing, and strong gusts. Under the most difficult setting, SwingRL achieves 69.5% strict and 77.3% broad success, exceeding all baselines by at least 60 percentage points, respectively. World-model ablations support the role of time-aligned state estimation in maintaining insertion success as observation loss increases. Finally, without real-robot fine-tuning, SwingRL achieves 90% success on the physical rig.

Closest papers

Nearest neighbours by meaning across the whole index.

Residual Deep Reinforcement Learning-Based Computed Torque Control for a Cable-Driven Lower-Limb Rehabilitation Robot under Disturbances and Parametric Uncertainties

cs.RO eess.SY ·2026-08-27 ·Mohammad-Hossein Fakouri, Ali Keymasi-Khalaji
similarity 0.66
Abstract · 32 pages, 24 figures, 13 tables. Preprint

Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian diagnostics. Across the evaluated conditions, the residual controller improves tracking and disturbance rejection relative to computed torque control while preserving the interpretable model-based command structure and satisfying the reported feasibility checks in the representative evaluation. Broader tests indicate that tracking improvements can persist beyond the representative case while also exposing trajectory-dependent constraint limitations. These results support bounded residual learning as a practical robustness-enhancement strategy for simulation-based rehabilitation robot control and motivate further constraint-aware and experimental validation.

0.14

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.60
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.45

LocoWM: High-Precision Locomotion through World-Model-Guided Residual Adaptation

cs.RO ·2026-09-30 ·Zijie Zhao, Shengqian Chen, Xiaoxu Wang, Han Jiang, Yuanheng Zhu +1 more
code/data similarity 0.60
Abstract

High-precision locomotion combines motion-command tracking with precise regulation of task-relevant physical states, enabling robots to interact reliably with their surroundings during motion. Joint end-to-end optimization can leave precision objectives insufficiently optimized, while reactive residual control adjusts actions only after deviations become observable. We present \textbf{LocoWM}, a world-model-guided preactive residual adaptation framework for high-precision locomotion. A base policy provides command-following locomotion, while an action-conditioned world model predicts a sequence of future physical states from proprioceptive history and the proposed base action. A residual adapter conditions on this predicted sequence to generate additive action corrections that compensate for anticipated deviations. Two-stage training first learns locomotion and action-conditioned dynamics, then freezes both modules while training the adapter, separating locomotion acquisition from precision adaptation. Experiments spanning terrain leveling, acceleration compensation, and push recovery demonstrate improved control precision and disturbance robustness over end-to-end and reactive residual baselines. Demos and code are available at: https://zhaozijie2022.github.io/LocoWM

0.32

CARO: Contact-Agnostic Residual Observation for Zero-Shot Robust Quadruped Locomotion

cs.RO ·2026-08-25 ·Zihan Yang, Shixuan Han, Kexin Guo, Xiang Yu
similarity 0.60
Abstract · 10 pages, 6 figures

We propose CARO, a contact-agnostic residual observation framework for policy adaptation. CARO embeds a fixed-base Euler--Lagrange model into the reinforcement learning control loop and constructs a torque-level residual observation without requiring torque sensors, explicit contact estimation, or vision-based measurements of the floating-base position and linear velocity. A disturbance observer extracts a structured signal representing dynamics mismatch, while the policy learns to exploit this feedback for online adaptation. CARO is trained under the same terrain, command, and domain-randomization conditions as the nominal policy, without specialized disturbance curricula or additional adaptation supervision. Nevertheless, it achieves substantially improved zero-shot robustness in simulation and sim-to-real transfer tasks involving out-of-distribution payloads, center-of-mass shifts, terrain geometries, abrupt dynamics changes, and elevated-platform landings.

0.15

RopeFormer: Cross-Trial Adaptation from Interaction History for Dynamic Rope Manipulation

cs.RO ·2026-09-20 ·Menglin Wu, Kaixiang Yao, Shangbo Luan, Masayoshi Tomizuka, Yuxin Chen
code/data similarity 0.59
Abstract

Dynamic rope manipulation is highly sensitive to unknown object dynamics: the same robot motion can produce substantially different responses across ropes, while explicitly identifying the relevant physical properties is difficult. We present RopeFormer, a history-conditioned framework that uses prior task interaction as context for subsequent control. The policy retains cross-trial action-response history while keeping its weights fixed and requires no explicit online rope-parameter estimation. In matched simulation evaluations across sustained single-arm rotation, bimanual rotation, and transient whipping, retaining context improves subsequent control relative to resetting the same checkpoint, with the benefit varying across rope dynamics and observation settings. We further deploy the frozen policies on a Unitree H1-2 with previously unseen physical ropes. From T1 to T3, target-acquisition time decreases by 30.9% for Rope Swing and 33.9% for Rope Twirl, while mean Rope Whip target hits increase from 0.2 to 2.3 out of three. These results show that prior interaction can provide effective control context for dynamic deformable-object manipulation. Robot videos, code, and data are available at https://ropeformer.github.io/.

0.39

Harnessing human expertise for high-precision robotic assembly in industrialized construction: A sample-efficient installer-in-the-loop interactive reinforcement learning framework

cs.RO stat.ML ·2026-09-02 ·Zekai Jin, Huiguang Wang, Xiaoning Sun, Yi Shao
published similarity 0.59
Abstract · 22 pages, 11 figures, 10 tables. Published in Advanced Engineering Informatics

Industrialized construction imposes stringent precision requirements on robotic assembly of modular components such as prefabricated window units. In tolerance-critical operations, the central bottleneck is not only mechanical clearance but also converting tacit installer expertise into data-efficient autonomy under sparse acceptance feedback, contact variability, and millimeter-scale constraints. We present an installer-in-the-loop interactive reinforcement learning framework that acquires expertise through offline teleoperated demonstrations, sparse event-driven binary takeovers at contact-failure boundaries, and acceptance-aligned terminal rewards, logged under a unified schema for traceable offline-to-online adaptation. A temporally abstract action-sequence policy built on Q-chunking with Flow Q-Learning captures multimodal recovery maneuvers under sparse terminal rewards, while a non-updating warm-start phase stabilizes the offline-to-online transition. The framework is evaluated in MuJoCo across the workflow from suction acquisition through clearance-limited seating, under structured staging and end-to-end randomized placement. Within a defined stress-test regime with 2 mm per-side clearance, bounded pose perturbations, and friction randomization, the pipeline attains 100\% autonomous seating with 12--15 min of cumulative installer supervision over 3.0 h of online training, and reaches the 95\% success milestone in approximately 0.5 h and 1.5 h in the two experiments. We also report wall-clock adaptation time, cumulative takeover minutes, intervention-rate decay, and stage-wise failure attribution to inform supervision budgeting. Ablations isolate the complementary contributions of temporal abstraction, installer intervention, and warm-start value calibration.

0.35

RM-WAM: Reliable Memory-Augmented World Action Models for Long-Horizon Robot Manipulation

cs.RO ·2026-10-11 ·Cui Miao, Junhao Yu, Ping Liu, Ning Yang, Xuhua Chen +3 more
similarity 0.59
Abstract

World Action Models (WAMs) improve robotic manipulation by jointly predicting future visual states and actions, yet most existing methods make decisions primarily from the current observation. This limits their reliability in long-horizon tasks, where visually similar states may correspond to different interaction histories and task stages. Moreover, directly incorporating historical observations can introduce stale, stage-mismatched, or error-contaminated information, leading to inaccurate world prediction and accumulated closed-loop errors. We propose RM-WAM, a reliable memory-augmented World Action Model that treats memory as a context-dependent predictive resource rather than universally useful historical context. RM-WAM represents history using complementary short-term visual state memory and latent event memory, which respectively capture recent interaction dynamics and longer-term state transitions. A counterfactual memory learning scheme varies the accessible history while keeping the current inputs and prediction targets fixed, enabling the model to learn a context-dependent utility estimate for historical memory. Based on this estimate, a utility-aware gating mechanism adaptively controls memory injection into the world-action backbone. Experiments demonstrate that RM-WAM highlights the importance of reliable and selective memory utilization in long-horizon tasks.

0.20

Demonstration Calibrated Port-Hamiltonian Retuning for Manipulation Policies

cs.RO eess.SY ·2026-10-05 ·Yulong Yang, Fan Wu, Christine Allen-Blanchette, Amit Chakraborty
similarity 0.59
Abstract

Diffusion and VLA policies for manipulation are often deployed through downstream impedance controllers. The stiffness and damping gains of these controllers affect task success, yet are commonly inherited from data collection rather than selected for the deployed policy. Although empirical gain sweeps can improve performance, they require repeated evaluation rollouts. We introduce PHRetune, an offline method that derives controller gains for a frozen policy without evaluation rollouts or gain search. Our approach learns a port-Hamiltonian model from demonstrations to estimate the effort and energy associated with the policy's predicted actions. The policy is applied to recorded demonstration observations, and its predictions are assessed against demonstration-derived effort and energy budgets. From this comparison, we derive a single gain scale in closed form, adjusting the downstream controller while preserving the policy and its action representation. The gains are fixed before evaluation, without requiring a prior manipulator model, task rewards, policy retraining, or additional runtime computation. Across LIBERO suites, PHRetune improves Diffusion Policy success by up to 9.4 percentage points, with the derived gains achieving the highest observed success rates in empirical gain sweeps. On all four real-world manipulation tasks, PHRetuned Diffusion Policy outperforms the nominal policy, alternative gain-tuning methods, and a policy-retraining baseline. The same procedure improves success with SmolVLA and OpenVLA-OFT on every task, while reducing acceleration and jerk for both VLA backbones.

0.22