CS Paper Radar

RopeFormer: Cross-Trial Adaptation from Interaction History for Dynamic Rope Manipulation

Menglin Wu, Kaixiang Yao, Shangbo Luan, Masayoshi Tomizuka, Yuxin Chen

cs.RO ·submitted 2026-09-20 07:59 UTC · v1
code/data

Abstract

Dynamic rope manipulation is highly sensitive to unknown object dynamics: the same robot motion can produce substantially different responses across ropes, while explicitly identifying the relevant physical properties is difficult. We present RopeFormer, a history-conditioned framework that uses prior task interaction as context for subsequent control. The policy retains cross-trial action-response history while keeping its weights fixed and requires no explicit online rope-parameter estimation. In matched simulation evaluations across sustained single-arm rotation, bimanual rotation, and transient whipping, retaining context improves subsequent control relative to resetting the same checkpoint, with the benefit varying across rope dynamics and observation settings. We further deploy the frozen policies on a Unitree H1-2 with previously unseen physical ropes. From T1 to T3, target-acquisition time decreases by 30.9% for Rope Swing and 33.9% for Rope Twirl, while mean Rope Whip target hits increase from 0.2 to 2.3 out of three. These results show that prior interaction can provide effective control context for dynamic deformable-object manipulation. Robot videos, code, and data are available at https://ropeformer.github.io/.

Closest papers

Nearest neighbours by meaning across the whole index.

Point It, Strike It: Direction-Conditioned Dynamic Manipulation of Deformable Linear Objects

cs.RO ·2026-10-07 ·Yi Yang, Xiang Fei, Lehong Wang, Zilin Dai, Ruogu Li +7 more
code/data similarity 0.73
Abstract · 9 pages, 5 figures, 4 tables. Project Page: https://deformx.github.io/DeformY

Goal-conditioned dynamic manipulation of deformable linear objects has mainly specified goals as positions for a rope tip to reach. Many tasks, however, depend on how the tip arrives. We therefore study single-swing rope striking with goals that specify the tip's 3D position and arrival direction, across the workspace and on different ropes. This is challenging because rope dynamics are hard to model, no demonstrations exist, distinct swings reach the same goal with different reliability, and the sim-to-real gap extends beyond the rope. To address these challenges, we extend the state-of-the-art DLO simulator DeformX with GPU acceleration, a stable Cosserat rod solver, and a cross-flow aerodynamic model, yielding DeformX2.0, which is more than $20{,}000\times$ faster. We then propose TRACE (Trace-rooted Adaptive Cross-Entropy), which generates striking data by warm-starting each new target from the stored swing whose tip path passes closest to it. Its cost penalizes rope bending and abrupt tip motion to favor repeatable swings. A conditional flow-matching policy trained on this data reaches 92.1% accuracy in simulation. Finally, we propose RECAP (Residual Calibration Policy), which fits the simulator's rope and rig parameters to a few calibration swings and adapts actions with a correction policy trained in simulation. On a real robot, across three ropes, RECAP raises success within 5cm from 72% to 87% for position goals, and within 10cm and 10° from 50% to 79% for goals that also specify the arrival direction.

0.31

Multimodal MPC via Bayesian Set Optimization for Dynamic Manipulation of Deformable Linear Objects

cs.RO ·2026-10-22 ·Youyuan Long, Gokhan Solak, Arash Ajoudani
code/data similarity 0.71
Abstract

Dynamic manipulation of deformable linear objects (DLOs) remains challenging due to underactuated, high-dimensional dynamics, delayed deformation responses, and the presence of multiple feasible motions under obstacle constraints. This paper presents BM2PC, a Bayesian Multimodal MPC framework for agile manipulation of DLOs. Building on the control-as-inference posterior, BM2PC formulates multimodal planning as a set optimization problem that balances control quality and behavioral diversity. An efficient incremental update maintains multiple promising control modes with low additional computational overhead. For real-world deployment, BM2PC incorporates an execution dynamics model that predicts actual end-effector motion and compensates for execution mismatch during fast manipulation. We evaluate BM2PC on rope tracking and obstacle avoidance in simulation and hardware, and on simulated disturbance rejection. In trajectory tracking, BM2PC generalizes better to unseen trajectories than a learning-based baseline without task-specific policy training or fine-tuning. Real-world experiments demonstrate accurate long-horizon tracking, reducing RMSE by 44.0% on the longest task. In obstacle avoidance, BM2PC achieves comparable performance to existing multimodal MPC methods while reducing planning time by 29% to 66%. These results demonstrate accurate dynamic control and efficient multimodal planning within a unified MPC framework. The core implementation of BM2PC and supplementary videos are available at https://github.com/Longyouyuan/BM2PC.

0.22

LIBERO-Dynamic: Benchmarking Robotic Manipulation in Dynamic Environments

cs.RO ·2026-10-17 ·Shaojie Ren, Jingwen Sun, Zezhi Liu, Hongjin Chen, Xin Jin +2 more
highly cited similarity 0.69
Abstract · 22 pages, 14 figures

Most simulation benchmarks for robotic manipulation keep target objects static and treat policy inference as instantaneous. These assumptions simplify evaluation but hide how a moving target evolves during computation and how stale an observation is when an action is executed. We introduce LIBERO-Dynamic, a dynamic extension of all 40 LIBERO tasks. It drives objects through contact friction along three trajectory families and speed tiers, while advancing the physical world according to calibrated, model-specific inference latency. The same mechanism supports training by replaying verified static demonstrations and compensating robot actions online for target displacement, producing 9,000 quality-filtered dynamic trajectories. We evaluate six pretrained policies on 1,800 dynamic conditions per configuration, compare execution strategies and action horizons with fixed checkpoints, and fine-tune three architectures using dynamic and mixed data. Faster motion degrades every policy but not uniformly; execution timing and horizon can change the behavior of the same policy; and asynchronous replanning benefits from frequent feedback only when the action queue avoids underflow. Dynamic demonstrations improve each architecture under at least one recipe, with gains varying by temporal conditioning, data composition, and training budget. A small-scale physical study shows task-dependent execution-strategy differences consistent with simulation. LIBERO-Dynamic makes object motion, inference latency, and action execution explicit and controllable for evaluating and improving robot policies in moving-target manipulation.

0.40

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.68
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

DefFlow: Goal-Conditioned Deformable Object Manipulation using 3D Point Flows

cs.RO ·2026-10-16 ·Gaurav Singh, Sergio Orozco, Ryan Duong, Mete Tuluhan Akbulut, George Konidaris +1 more
similarity 0.67
Abstract

Manipulating deformable objects toward desired 3D configurations is a fundamental capability for robots operating in unstructured physical environments. However, as the range of possible initial and target configurations grows, goal-conditioned deformable manipulation requires a robot to infer increasingly diverse manipulation behaviors in addition to precise continuous actions. We introduce DefFlow, a framework for goal-conditioned manipulation of deformable objects toward a broad range of 3D configurations. DefFlow learns from demonstrations by jointly predicting the goal-conditioned 3D point flow of the robot and deformable object. We show that this formulation better captures both the manipulation decisions, such as when and where to grasp, release, or re-grasp, and the precise continuous motions required for goal reaching, rather than predicting only the robot flow. Across rope, granular-media, and cloth manipulation settings with diverse initial and target configurations, DefFlow substantially outperforms goal-conditioned action-prediction and robot-flow-only baselines on success rates and goal-distance metrics. We further demonstrate deployment of our framework on a real robot using real point-cloud observations and unseen goal configurations.

0.15

ForceDelta-VLA: Distilling Force-Conditioned Action Corrections for Contact-Rich Manipulation

cs.RO ·2026-09-16 ·Ju Dong, Yu Fu, Jian Chen, Yimeng Liu, Haocheng Zhao +7 more
similarity 0.67
Abstract · 8 pages, 8 figures

Force-aware Vision-Language-Action (VLA) policies improve contact-rich manipulation, but typically combine task-level motion and contact-dependent adjustment in a single action prediction. Demonstrations provide no explicit labels for decomposing that prediction into a reusable reference action and a correction. We present ForceDelta-VLA, a correction-distillation framework that constructs an explicit force-correction target using paired predictions from a frozen teacher's force-conditioned and learned force-agnostic modes. A separate delay-correction target accounts for reference-action mismatch and the change in reference state. Training uses asynchronous schedule replay with the cached task context available during execution. The resulting lightweight policy adjusts the reference actions using recent force history and robot state, responding to contact changes between reference-action updates without regenerating complete action chunks. Across nine single-arm and bimanual contact-rich tasks, ForceDelta-VLA achieves an 82.2% mean success rate, compared with 54.4% for the original ForceVLA baseline. Direct execution of our Stage-1 Temporal Teacher achieves 70.6%. Relative to ForceVLA, the complete system reduces mean peak contact force over successful trials by approximately 26% on both platforms.

0.47

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.67
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

Scaling Latent Motor Adaptation to Coordinated Bimanual Manipulation

cs.RO ·2026-10-10 ·Seung-Bin Joo, Alessandro Albini, Luca Wiehe, Perla Maiolino, Daniel Olmeda Reino +1 more
published similarity 0.67
Abstract · Accepted at the IROS 2026 Bimanual Manipulation Workshop. 5 pages, 4 figures

Robust manipulation under uncertain object dynamics and geometry remains a core challenge in real-world robotics. Policies trained under fixed assumptions often degrade when object mass, friction, scale, or shape vary. Embedding-based adaptation methods such as Rapid Motor Adaptation (RMA) address this by conditioning actions on latent representations of environment dynamics inferred from interaction history. We investigate whether this paradigm scales from single arm settings to coordinated bimanual manipulation, where higher dimensional control, coupled contacts, and shared object forces introduce additional complexity. We evaluate bimanual RMA on three contact-rich ManiSkill tasks with randomized YCB object properties. Bimanual RMA, using observation-action history and dual wrist depth images, retains privileged policy performance on bimanual picking and lifting, while an otherwise matched stationary PPO policy without latent conditioning achieves low success; all methods remain limited on long-horizon stacking. We further demonstrate direct sim-to-real transfer on a dual Franka lifting task without real-world finetuning. Together, these results suggest that latent conditioning provides useful structure for scaling robust control to coordinated bimanual systems, while longer horizon tasks require additional temporal structure.

0.29