CS Paper Radar

Point It, Strike It: Direction-Conditioned Dynamic Manipulation of Deformable Linear Objects

Yi Yang, Xiang Fei, Lehong Wang, Zilin Dai, Ruogu Li, Jiting Cai, Liyao Chang, Xinyi Yang, Henry Kou, Ruijie Fu, Lu Li, Howie Choset

cs.RO ·submitted 2026-10-07 07:15 UTC · v1
code/data

Abstract

Goal-conditioned dynamic manipulation of deformable linear objects has mainly specified goals as positions for a rope tip to reach. Many tasks, however, depend on how the tip arrives. We therefore study single-swing rope striking with goals that specify the tip's 3D position and arrival direction, across the workspace and on different ropes. This is challenging because rope dynamics are hard to model, no demonstrations exist, distinct swings reach the same goal with different reliability, and the sim-to-real gap extends beyond the rope. To address these challenges, we extend the state-of-the-art DLO simulator DeformX with GPU acceleration, a stable Cosserat rod solver, and a cross-flow aerodynamic model, yielding DeformX2.0, which is more than $20{,}000\times$ faster. We then propose TRACE (Trace-rooted Adaptive Cross-Entropy), which generates striking data by warm-starting each new target from the stored swing whose tip path passes closest to it. Its cost penalizes rope bending and abrupt tip motion to favor repeatable swings. A conditional flow-matching policy trained on this data reaches 92.1% accuracy in simulation. Finally, we propose RECAP (Residual Calibration Policy), which fits the simulator's rope and rig parameters to a few calibration swings and adapts actions with a correction policy trained in simulation. On a real robot, across three ropes, RECAP raises success within 5cm from 72% to 87% for position goals, and within 10cm and 10° from 50% to 79% for goals that also specify the arrival direction.

Comment
9 pages, 5 figures, 4 tables. Project Page: https://deformx.github.io/DeformY

Closest papers

Nearest neighbours by meaning across the whole index.

RopeFormer: Cross-Trial Adaptation from Interaction History for Dynamic Rope Manipulation

cs.RO ·2026-09-20 ·Menglin Wu, Kaixiang Yao, Shangbo Luan, Masayoshi Tomizuka, Yuxin Chen
code/data similarity 0.73
Abstract

Dynamic rope manipulation is highly sensitive to unknown object dynamics: the same robot motion can produce substantially different responses across ropes, while explicitly identifying the relevant physical properties is difficult. We present RopeFormer, a history-conditioned framework that uses prior task interaction as context for subsequent control. The policy retains cross-trial action-response history while keeping its weights fixed and requires no explicit online rope-parameter estimation. In matched simulation evaluations across sustained single-arm rotation, bimanual rotation, and transient whipping, retaining context improves subsequent control relative to resetting the same checkpoint, with the benefit varying across rope dynamics and observation settings. We further deploy the frozen policies on a Unitree H1-2 with previously unseen physical ropes. From T1 to T3, target-acquisition time decreases by 30.9% for Rope Swing and 33.9% for Rope Twirl, while mean Rope Whip target hits increase from 0.2 to 2.3 out of three. These results show that prior interaction can provide effective control context for dynamic deformable-object manipulation. Robot videos, code, and data are available at https://ropeformer.github.io/.

0.39

Multimodal MPC via Bayesian Set Optimization for Dynamic Manipulation of Deformable Linear Objects

cs.RO ·2026-10-22 ·Youyuan Long, Gokhan Solak, Arash Ajoudani
code/data similarity 0.69
Abstract

Dynamic manipulation of deformable linear objects (DLOs) remains challenging due to underactuated, high-dimensional dynamics, delayed deformation responses, and the presence of multiple feasible motions under obstacle constraints. This paper presents BM2PC, a Bayesian Multimodal MPC framework for agile manipulation of DLOs. Building on the control-as-inference posterior, BM2PC formulates multimodal planning as a set optimization problem that balances control quality and behavioral diversity. An efficient incremental update maintains multiple promising control modes with low additional computational overhead. For real-world deployment, BM2PC incorporates an execution dynamics model that predicts actual end-effector motion and compensates for execution mismatch during fast manipulation. We evaluate BM2PC on rope tracking and obstacle avoidance in simulation and hardware, and on simulated disturbance rejection. In trajectory tracking, BM2PC generalizes better to unseen trajectories than a learning-based baseline without task-specific policy training or fine-tuning. Real-world experiments demonstrate accurate long-horizon tracking, reducing RMSE by 44.0% on the longest task. In obstacle avoidance, BM2PC achieves comparable performance to existing multimodal MPC methods while reducing planning time by 29% to 66%. These results demonstrate accurate dynamic control and efficient multimodal planning within a unified MPC framework. The core implementation of BM2PC and supplementary videos are available at https://github.com/Longyouyuan/BM2PC.

0.22

DefFlow: Goal-Conditioned Deformable Object Manipulation using 3D Point Flows

cs.RO ·2026-10-16 ·Gaurav Singh, Sergio Orozco, Ryan Duong, Mete Tuluhan Akbulut, George Konidaris +1 more
similarity 0.69
Abstract

Manipulating deformable objects toward desired 3D configurations is a fundamental capability for robots operating in unstructured physical environments. However, as the range of possible initial and target configurations grows, goal-conditioned deformable manipulation requires a robot to infer increasingly diverse manipulation behaviors in addition to precise continuous actions. We introduce DefFlow, a framework for goal-conditioned manipulation of deformable objects toward a broad range of 3D configurations. DefFlow learns from demonstrations by jointly predicting the goal-conditioned 3D point flow of the robot and deformable object. We show that this formulation better captures both the manipulation decisions, such as when and where to grasp, release, or re-grasp, and the precise continuous motions required for goal reaching, rather than predicting only the robot flow. Across rope, granular-media, and cloth manipulation settings with diverse initial and target configurations, DefFlow substantially outperforms goal-conditioned action-prediction and robot-flow-only baselines on success rates and goal-distance metrics. We further demonstrate deployment of our framework on a real robot using real point-cloud observations and unseen goal configurations.

0.15

An Empirical Study of Reinforcement Learning for Keypoint Positioning of Deformable Linear Objects

cs.RO ·2026-11-05 ·Vinay Rodrigues, Sara Zeynalpour, Gokhan Solak, Sebastian Hjorth, Arash Ajoudani
similarity 0.66
Abstract

Deformable linear object (DLO) manipulation is challenging because high-dimensional configurations, nonlinear contact dynamics, and diverse material and geometric properties produce a broad range of object responses that are both difficult to model and data-intensive to learn. This work studies reinforcement learning for planar manipulation of a one-end-grasped DLO, focusing on training efficiency, observation design, robustness, and zero-shot sim-to-real transfer. We compare three Proximal Policy Optimization training stacks and find that the GPU-parallel MuJoCo Playground stack enables faster convergence and more consistent performance than CPU-based alternatives under the same wall-clock budget. Relative keypoint observations and an asymmetric actor-critic formulation further improve learning efficiency. Policies trained with observation noise, delay, domain randomization, and disturbances achieve simulation success rates of 96.4% for single-point tracking, 98.0% for disturbance recovery, and 88.8% for two-point tracking. Using markerless RGB-D keypoint estimation, the policies transfer without real-world fine-tuning, succeeding in 9/10, 10/10, and 8/10 physical trials, respectively.

0.09

LIBERO-Dynamic: Benchmarking Robotic Manipulation in Dynamic Environments

cs.RO ·2026-10-17 ·Shaojie Ren, Jingwen Sun, Zezhi Liu, Hongjin Chen, Xin Jin +2 more
highly cited similarity 0.65
Abstract · 22 pages, 14 figures

Most simulation benchmarks for robotic manipulation keep target objects static and treat policy inference as instantaneous. These assumptions simplify evaluation but hide how a moving target evolves during computation and how stale an observation is when an action is executed. We introduce LIBERO-Dynamic, a dynamic extension of all 40 LIBERO tasks. It drives objects through contact friction along three trajectory families and speed tiers, while advancing the physical world according to calibrated, model-specific inference latency. The same mechanism supports training by replaying verified static demonstrations and compensating robot actions online for target displacement, producing 9,000 quality-filtered dynamic trajectories. We evaluate six pretrained policies on 1,800 dynamic conditions per configuration, compare execution strategies and action horizons with fixed checkpoints, and fine-tune three architectures using dynamic and mixed data. Faster motion degrades every policy but not uniformly; execution timing and horizon can change the behavior of the same policy; and asynchronous replanning benefits from frequent feedback only when the action queue avoids underflow. Dynamic demonstrations improve each architecture under at least one recipe, with gains varying by temporal conditioning, data composition, and training budget. A small-scale physical study shows task-dependent execution-strategy differences consistent with simulation. LIBERO-Dynamic makes object motion, inference latency, and action execution explicit and controllable for evaluating and improving robot policies in moving-target manipulation.

0.40

ForwardDLO: Model-Based Bimanual Shape Matching of Unconstrained Deformable Linear Objects

cs.RO ·2026-09-16 ·Tim Missal, Berk Guler, Lucas Domingues, Simon Manschitz, Jan Peters +1 more
dataset similarity 0.64
Abstract · 8 pages, 5 figures

Ropes, cables, and other deformable linear objects appear in tasks from untangling to cable routing and suturing, yet controlling their shape remains a challenge in robot manipulation. We study model-based shape control in a general setting: the object lies unfixated on a support surface and two arms may grasp and move it anywhere along its length. Because each arm chooses a grasp point, direction, and magnitude, the joint action space is combinatorially large, and the dynamics model's per-prediction cost bounds how much of it a planner can search. We present ForwardDLO, a recurrent latent dynamics model for this unfixated bimanual setting that predicts per-segment displacements grounded in the observed rope state at every step. Our model reaches accuracy comparable to more expensive baselines while containing no explicit segment-to-segment operations, which makes batched evaluation of candidate actions cheap. On open-loop prediction of real rope motion it reaches the lowest error of the learned models we evaluate, 13% below the strongest baseline. Within a fixed time budget it scores 8 to 22 times more candidate actions than models of comparable accuracy while matching them in real-world shape matching; and on a simulated routing task at a 30Hz control rate, this throughput converts into 98% task success versus at most 30% for the baselines at their own budgets. We release the model, code, and a dataset of 2.42 million simulated and 14,107 real rope transitions at https://anonymous.4open.science/r/ForwardDLO/

0.36

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

cs.RO ·2026-11-10 ·Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli
similarity 0.63
Abstract · Submitted to ICRA 2027

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

0.15

CQDC-Warp: GPU-Accelerated Differentiable Quasi-Dynamic Simulation for Contact-Rich Manipulation

cs.RO ·2026-10-15 ·Yanchen Ding, Jiayi Chen, Jianfeng Xu, Wei Zhao, Li Yi +1 more
benchmark similarity 0.63
Abstract

Efficient synthesis of contact-rich manipulation trajectories is essential for downstream robot learning. Gradient-based planning offers a promising approach, but jointly optimizing motion and contact decisions remains challenging. Meanwhile, many existing planners run on CPUs with limited throughput. We present CQDC-Warp, a GPU-accelerated differentiable quasi-dynamic simulator for batched model predictive control (MPC). We use it to study contact-guided trajectory optimization, in which intended robot--object contacts are specified before planning and encouraged through soft costs, while the simulated dynamics determine contact geometry and frictional response without a prescribed contact-mode schedule. Across $17{,}408$ trials on the $17$-object Allegro in-hand rotation benchmark, our framework achieves $79.8\%$ success, compared with $73.7\%$ for CFree and $65.2\%$ for IMPACT, and reduces mean trajectory-generation time by factors of $27.0$ and $50.2$, respectively. On a single NVIDIA RTX 4090 with $2{,}048$ parallel worlds, forward and backward throughput reach $2.06\times10^5$ and $2.25\times10^5$ world-steps per second, respectively. Further experiments cover manipulation with LEAP and Shadow hands, environmental contact exploitation, bimanual manipulation, whole-body control, and real-world trajectory replay on a Sharpa hand.

0.12