CS Paper Radar

Force-Aware Reinforcement Learning with Hybrid Sensorless Force Estimation for Wheeled-Legged Loco-Manipulation

Xuanqi Zeng, Jiaming Wang, Tianlin Zhang, Lingwei Zhang, Botian Xu, Weipeng Xia, Zhongyu Li, Yun-Hui Liu

cs.RO ·submitted 2026-09-12 07:46 UTC · v1

Abstract

Force-controlled loco-manipulation requires a whole-body policy to coordinate locomotion and arm motion while regulating end-effector interaction forces. This is challenging under floating-base dynamics and changing support contacts, particularly when end-effector force/torque sensing is unavailable for control. This paper presents a force-aware reinforcement learning approach with hybrid sensorless force estimation for wheeled-legged loco-manipulation. The proposed method provides a structured estimate of the end-effector force as an explicit policy observation, enabling force-guided contact behavior without using an end-effector force/torque sensor for control. The force estimate is obtained by combining generalized momentum observation, contact-constrained wrench projection, and temporal residual learning: the model-based components extract the physically structured part of the whole-body disturbance, while the residual network compensates the remaining motion-dependent bias. The estimated force is integrated into a mode-conditioned whole-body policy with an axis-wise force/position selector, allowing free-space motion, pure force regulation, and hybrid force/position control within one controller. Simulation results demonstrate improved sensorless force estimation and force-control performance. Hardware experiments further validate the proposed controller through quantitative valve-rotation and hybrid wiping evaluations, together with force-guided door opening and zero-force human-guided motion on a real wheeled-legged platform.

Comment
12 pages, 8 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

FWBC-VLA: Force-Aware Whole-Body Compensation for Contact-Rich Loco-Manipulation

cs.RO cs.AI ·2026-09-03 ·Yutian Zhang, Siyuan Ma, Liwen Yang, Yang Li, Ce Hao +4 more
similarity 0.76
Abstract · 9 pages, 6 figures

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL\&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

0.46

ForPC: Force-Aware Whole-Body Control for Precise Humanoid Cart Pushing

cs.RO ·2026-11-05 ·ZhenYu Zou, Xing Liu, ShiChuang Wang, YunLong Dong, LiNan Deng +3 more
similarity 0.74
Abstract · 14 pages, 7 figures, 4 tables. Project website: https://roboforpc.github.io/. Corresponding author: Cheng Cheng

Humanoid robots are expected to take over strenuous material handling in manufacturing, logistics, and healthcare, where operating existing wheeled carts would let them move heavy loads without modifying the workplace. However, humanoid cart pushing remains challenging because the bimanual grasp closes a force-coupled loop in which the contact wrenches that drive the cart also disturb the robot's balance, and payload changes alter the coupled dynamics. We propose ForPC, a force-aware whole-body control framework that regulates cart velocity through two-stage reinforcement learning. A locomotion prior is first trained under varied hand loads and upper-body postures to provide balance support. A force latent and a state latent are then inferred from onboard observations, without external force sensors, and fed to a residual policy that coordinates bounded arm, waist, and leg adjustments with base-velocity commands. Multi-objective rewards penalize bimanual internal opposition, grasp slip, and actuator saturation, encouraging the policy to apply contact force on demand without human demonstrations. Sim-to-sim experiments show that ForPC reduces cart-velocity RMSE by up to 68.2% relative to a locomotion-only baseline (Loco-only) and cross-track RMSE by up to 74.2% on the multi-bend route. Trained solely in simulation, the policy also transfers to a physical Unitree G1 without real-world training or fine-tuning and, with no payload-specific adjustment, pushes a cart carrying up to 30 kg at 0.5 m/s. These results suggest that humanoid robots could eventually replace humans for efficient material handling in daily life.

0.21

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.71
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15

LETS: Low-Overhead External-Torque Sensing for Force-Feedback Bilateral Teleoperation

cs.RO ·2026-10-10 ·Zonghao Guo, Dongchen Guan, Yubo Wang, Peng Yang
similarity 0.71
Abstract · 8 pages, 7 figures

Bilateral teleoperation with force feedback is becoming increasingly important, and the quality of external-torque estimation is critical to this process. However, manufacturer-provided disturbance-torque estimates on commercial robotic arms are often inaccurate, while the use of end-effector force/torque sensors adds cost and payload. We propose LETS, a physics-guided learning approach that assigns rigid-body dynamics to recursive Newton-Euler inverse dynamics and reserves learning for only the robot-specific residual. LETS uses only the robot's URDF model and joint feedback, deliberately excluding control commands and thereby decoupling external-torque estimation from control-command inputs. It trains on 12 minutes of free-motion data in under one minute, without requiring a dedicated end-effector six-axis force/torque sensor. In bilateral teleoperation, LETS achieves real-time external-torque estimation that enables stable force feedback. Its free-space error is 69% lower than the manufacturer-provided estimate, substantially reducing coupled oscillations between leader and follower; its contact error is 28% lower, yielding more accurate haptic feedback.

0.19

Learning Force-Reactive Humanoid Loco-Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-26 ·Sihang Li, Xiaofeng Guo, Jinkun Cao, Charlie Cheng, Ruihan Yang +3 more
highly cited similarity 0.70
Abstract · 9 pages, 6 figures

Many everyday tasks require controlling contact force as well as motion. On a humanoid, this force must often be coordinated across both hands and the whole body, and cannot be specified by kinematic trajectories alone. Therefore, we present FLORE, a framework for learning force-reactive humanoid loco-manipulation. We collect robot-free demonstrations using two force-sensing UMI-style handheld grippers for hand motion and contact wrenches, and wearable trackers for body motion. A force-reactive diffusion policy takes vision, proprioception, and measured wrenches as input, then predicts actions and per-hand force commands. A hybrid compliance whole-body controller with force tracking executes these commands while maintaining balance: an integral of the force error measured by real force/torque (F/T) sensors lets each hand track force accurately along the commanded direction and remain compliant along the others. In simulation, the controller tracks per-hand force commands of varied magnitude and direction, with little loss in whole-body motion accuracy. Across three contact-rich tasks on the robot, the force-reactive policy succeeds in 80% of rollouts, compared with 26.7% for a position-only policy trained on the same demonstrations and executed by the same controller. For more details, please visit our website: https://louis-leee.github.io/FLoRe/.

0.49

Enabling Scalable Kinesthetic Teaching via Observer-based Hand-guiding with Active Support

cs.RO ·2026-08-11 ·Anna Tuma, Giuseppe Monetti, Jochen J. Steil, Niels Dehio
published similarity 0.70
Abstract

Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.

0.23

Learning-Enhanced Observer for Sensorless Task-Null-Space Compliant Control

cs.RO ·2026-10-20 ·Nuo Chen, Ya-Jun Pan, Onur Toker
similarity 0.70
Abstract

This paper presents a novel framework integrating a robust wrench observer with a hybrid pose and force controller for physical Human-Robot Interaction (pHRI). In pHRI tasks, robots are expected to perform task-space motions robustly while remaining compliance with human disturbance, which proposes distinct control objectives. Most existing approaches focus mainly on either robustness or compliance and rely on force sensors for real-time tracking. To address these limitations, we propose a novel framework with the following key contributions. Firstly, a neural network (NN) is trained to improve the observer performance by compensating for system friction and unmodeled dynamics. Secondly, a task-null-space decomposition is applied to separate the joint velocity and reduce the effect of the human disturbance on the observer. Finally, a hybrid pose and force controller is introduced to achieve the end-effector pose and force tracking. Experimental results demonstrate that the proposed framework provides robust and accurate wrench estimation while maintaining reliable pose and force tracking performance. The proposed approach offers an effective solution and framework for pHRI without the need of force/torque sensor measurements which can be applied to many robotic manipulator platforms which do not have force/torque sensors.

0.10

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.70
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17