CS Paper Radar

Learning-Enhanced Observer for Sensorless Task-Null-Space Compliant Control

Nuo Chen, Ya-Jun Pan, Onur Toker

cs.RO ·submitted 2026-10-20 18:08 UTC · v1

Abstract

This paper presents a novel framework integrating a robust wrench observer with a hybrid pose and force controller for physical Human-Robot Interaction (pHRI). In pHRI tasks, robots are expected to perform task-space motions robustly while remaining compliance with human disturbance, which proposes distinct control objectives. Most existing approaches focus mainly on either robustness or compliance and rely on force sensors for real-time tracking. To address these limitations, we propose a novel framework with the following key contributions. Firstly, a neural network (NN) is trained to improve the observer performance by compensating for system friction and unmodeled dynamics. Secondly, a task-null-space decomposition is applied to separate the joint velocity and reduce the effect of the human disturbance on the observer. Finally, a hybrid pose and force controller is introduced to achieve the end-effector pose and force tracking. Experimental results demonstrate that the proposed framework provides robust and accurate wrench estimation while maintaining reliable pose and force tracking performance. The proposed approach offers an effective solution and framework for pHRI without the need of force/torque sensor measurements which can be applied to many robotic manipulator platforms which do not have force/torque sensors.

Closest papers

Nearest neighbours by meaning across the whole index.

Force-Aware Reinforcement Learning with Hybrid Sensorless Force Estimation for Wheeled-Legged Loco-Manipulation

cs.RO ·2026-09-12 ·Xuanqi Zeng, Jiaming Wang, Tianlin Zhang, Lingwei Zhang, Botian Xu +3 more
similarity 0.70
Abstract · 12 pages, 8 figures, 2 tables

Force-controlled loco-manipulation requires a whole-body policy to coordinate locomotion and arm motion while regulating end-effector interaction forces. This is challenging under floating-base dynamics and changing support contacts, particularly when end-effector force/torque sensing is unavailable for control. This paper presents a force-aware reinforcement learning approach with hybrid sensorless force estimation for wheeled-legged loco-manipulation. The proposed method provides a structured estimate of the end-effector force as an explicit policy observation, enabling force-guided contact behavior without using an end-effector force/torque sensor for control. The force estimate is obtained by combining generalized momentum observation, contact-constrained wrench projection, and temporal residual learning: the model-based components extract the physically structured part of the whole-body disturbance, while the residual network compensates the remaining motion-dependent bias. The estimated force is integrated into a mode-conditioned whole-body policy with an axis-wise force/position selector, allowing free-space motion, pure force regulation, and hybrid force/position control within one controller. Simulation results demonstrate improved sensorless force estimation and force-control performance. Hardware experiments further validate the proposed controller through quantitative valve-rotation and hybrid wiping evaluations, together with force-guided door opening and zero-force human-guided motion on a real wheeled-legged platform.

0.38

Enabling Scalable Kinesthetic Teaching via Observer-based Hand-guiding with Active Support

cs.RO ·2026-08-11 ·Anna Tuma, Giuseppe Monetti, Jochen J. Steil, Niels Dehio
published similarity 0.68
Abstract

Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.

0.23

LETS: Low-Overhead External-Torque Sensing for Force-Feedback Bilateral Teleoperation

cs.RO ·2026-10-10 ·Zonghao Guo, Dongchen Guan, Yubo Wang, Peng Yang
similarity 0.67
Abstract · 8 pages, 7 figures

Bilateral teleoperation with force feedback is becoming increasingly important, and the quality of external-torque estimation is critical to this process. However, manufacturer-provided disturbance-torque estimates on commercial robotic arms are often inaccurate, while the use of end-effector force/torque sensors adds cost and payload. We propose LETS, a physics-guided learning approach that assigns rigid-body dynamics to recursive Newton-Euler inverse dynamics and reserves learning for only the robot-specific residual. LETS uses only the robot's URDF model and joint feedback, deliberately excluding control commands and thereby decoupling external-torque estimation from control-command inputs. It trains on 12 minutes of free-motion data in under one minute, without requiring a dedicated end-effector six-axis force/torque sensor. In bilateral teleoperation, LETS achieves real-time external-torque estimation that enables stable force feedback. Its free-space error is 69% lower than the manufacturer-provided estimate, substantially reducing coupled oscillations between leader and follower; its contact error is 28% lower, yielding more accurate haptic feedback.

0.19

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.66
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Learning Force-Reactive Humanoid Loco-Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-26 ·Sihang Li, Xiaofeng Guo, Jinkun Cao, Charlie Cheng, Ruihan Yang +3 more
highly cited similarity 0.63
Abstract · 9 pages, 6 figures

Many everyday tasks require controlling contact force as well as motion. On a humanoid, this force must often be coordinated across both hands and the whole body, and cannot be specified by kinematic trajectories alone. Therefore, we present FLORE, a framework for learning force-reactive humanoid loco-manipulation. We collect robot-free demonstrations using two force-sensing UMI-style handheld grippers for hand motion and contact wrenches, and wearable trackers for body motion. A force-reactive diffusion policy takes vision, proprioception, and measured wrenches as input, then predicts actions and per-hand force commands. A hybrid compliance whole-body controller with force tracking executes these commands while maintaining balance: an integral of the force error measured by real force/torque (F/T) sensors lets each hand track force accurately along the commanded direction and remain compliant along the others. In simulation, the controller tracks per-hand force commands of varied magnitude and direction, with little loss in whole-body motion accuracy. Across three contact-rich tasks on the robot, the force-reactive policy succeeds in 80% of rollouts, compared with 26.7% for a position-only policy trained on the same demonstrations and executed by the same controller. For more details, please visit our website: https://louis-leee.github.io/FLoRe/.

0.49

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.63
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.24

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.62
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.62
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15