CS Paper Radar

Physics-Informed Direct Data-Driven Gain-Scheduled Control for Improving the Extrapolation Performance of Vehicle Lateral Control

Shuichi Yahagi, Aoi Koyanagi, Ansei Yonezawa, Heisei Yonezawa, Hiroki Seto, Toshiyuki Sugimachi, Itsuro Kajiwara

eess.SY ·submitted 2026-11-16 11:16 UTC · v1

Abstract

This paper proposes a physics-informed direct data-driven control (PI-D3C) framework for designing a gain-scheduled proportional-integral controller for vehicle yaw-rate tracking. Vehicle lateral dynamics vary depending on vehicle velocity, making it difficult for controllers designed using data collected over a limited operating range to maintain satisfactory control performance outside that range. We introduce a novel PI-D3C framework that integrates pure data-driven virtual reference feedback tuning (VRFT) with prior physical knowledge, thereby significantly improving extrapolation performance beyond the operating range covered by the collected data. In the proposed approach, the gain-scheduled controller parameters are designed based on both training data and the yaw-rate response predicted by the physics-based model. To evaluate the effectiveness of the proposed method, numerical simulations are conducted using co-simulation between MATLAB/Simulink and CarSim. The results demonstrate that the controller designed by pure VRFT achieves satisfactory tracking performance within the training velocity region but exhibits significant deterioration in tracking performance outside the training region. In contrast, the proposed controller maintains good yaw-rate tracking performance over a wider velocity range while suppressing excessive variations in the scheduled gains and steering input. These results indicate that incorporating prior physical knowledge into pure data-driven VRFT improves the extrapolation performance of gain-scheduled controllers designed using limited training data.

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.65
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.61
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.21

Energy-Aware Path Following: Comparative Analysis of Reinforcement Learning and NMPC for Electric Vehicles

cs.RO cs.LGeess.SY ·2026-10-06 ·Mohamed Sabaa, Mostafa Emam
similarity 0.58
Abstract · 20 pages, 12 figures, currently submitted for review at the journal (Robotics and Autonomous Systems) https://www.sciencedirect.com/journal/…

Path-following control strategies typically follow the bi-objective optimization dilemma: minimizing deviations from a reference path while maintaining smooth speed profiles. The latter objective is especially relevant for Electric Vehicles (EVs), since their limited driving range can be extended by recovering energy through regenerative braking, a feature that has not yet been sufficiently studied in the literature. In this work, we perform a comparative analysis of four controllers under one common Frenet frame-based kinematic vehicle model, utilizing a validated energy model (VT-CPEM) with explicit regenerative braking. Herein, we implement the following controllers: Nonlinear Model Predictive Control (NMPC), Proximal Policy Optimization (PPO), gain-scheduled Ackermann state-feedback baseline (PID-SF), and a Stanley geometric baseline. To satisfy real-time requirements, we implement the NMPC using JIT-compiled CasADi. Moreover, we train the PPO using traditional straight and S-curve tracks, after which we successfully transfer the unmodified policy to unseen tracks, including: an ISO 3888-1 lane-change, a chicane, randomly-generated parameterized-splines, and a $\pm3^\circ$ graded road. In addition, the policy transfers to a dynamic single-track vehicle model with linear tires, zero-shot with an acceptable initial performance, which was optimized after brief fine-tuning. Thereby, we demonstrate that our PPO is readily transferable to more comprehensive vehicle models. We conclude with a performance analysis of developed controllers and discuss ideas for future work.

0.25

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

cs.RO ·2026-11-16 ·Xiangyang Ye, Chaosheng Huang, Jinwen Yang, Zhengxian Chen, Jun Li
similarity 0.58
Abstract

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.

0.34

Online Sim-to-Real Adaptation via Closed-Loop System Modeling

cs.RO ·2026-09-24 ·Yuhao Huang, Samuel A. Moore, Boyuan Chen
similarity 0.58
Abstract

Sim-to-real transfer has made substantial progress, but can still produce controllers that remain stable and functional on hardware while suffering from degraded tracking accuracy due to residual dynamics mismatch. Correcting these errors typically requires identifying the underlying system dynamics, adapting the control policy, or returning to simulation for additional training and finetuning, all of which can require substantial data and computation. We propose OSRAM (Online Sim-to-Real Adaptation via Closed-Loop System Modeling), a framework that instead adapts the reference commands provided to an existing controller. OSRAM treats the deployed robot and its policy as a unified closed-loop dynamical system and learns its task-level command-response behavior directly from tracking observations. A closed-loop dynamics model is meta-trained across randomized dynamics in simulation and rapidly finetuned after deployment using limited real-world interaction. The adapted model is then used to optimize future reference commands while leaving the underlying control policy unchanged. We evaluate OSRAM on bipedal velocity tracking and loco-manipulation in simulation and on hardware. Results show that closed-loop modeling improves prediction and tracking accuracy under unseen dynamics, while online reference adaptation reduces residual sim-to-real tracking errors across different control objectives and hardware configurations. These results demonstrate that adapting the behavior of the robot-policy closed loop provides a practical alternative to finetuning the policy or identifying the full physical dynamics for sim-to-real transfer. More information can be found at http://generalroboticslab.com/OSRAM.

0.35

RACER: Residual-Adaptive Closed-Loop Estimation for Sampling-Based Planning in Wheeled-Quadruped Racing

cs.RO ·2026-10-05 ·Yuxiang Liu, Marla Eisman, Lizhi Yang, Aaron Ames, Francesco Borrelli
similarity 0.57
Abstract

We present RACER, a hierarchical control framework for wheel-based quadruped racing that combines an MPPI planner with a learned residual dynamics model and a low-level RL velocity tracker. The planner augments a nominal unicycle kinematic model with a neural residual term to capture the closed-loop tracking behavior of the RL policy. To train this residual model under limited real-world data, we propose Low-Rank Residual Adaptation (LoRRA), a two-stage approach that pre-trains on large-scale simulation data for broad coverage and then fine-tunes on a small real-world dataset with a low-rank constraint. In simulation, we empirically validate our engineering choices by showing (A) Residual dynamics improve the overall performance of our pipeline by capturing the tracking error of RL velocity tracker at high-speed cornering. (B) Residual dynamics trained with both source-domain and target-domain data gives racing performance significantly better than the residual dynamics trained with only target-domain data. (C) Low-rank constraint at target-domain adaptation gives higher success rates and higher performance than full-tune and from-scratch when domain gap in ground coefficient or joint gain increases.

0.23

Beyond Planning: Differentiable Control-in-the-loop End-to-End Autonomous Driving

cs.RO ·2026-10-13 ·Zhidong Wang, Zirui Li, Zitong Shan, Zhiqi Mao, Qihang Huang +4 more
benchmark similarity 0.57
Abstract

End-to-end autonomous driving has achieved remarkable progress by planning trajectories directly from raw sensor data. Yet the step from planning to control still relies on hand-tuned tracking controllers that block the gradient path from vehicle motion back to the network. This gap stems from non-differentiable vehicle dynamics, aliased supervision from coarsely sampled expert labels, rate mismatch between high-rate control and low-rate re-planning, and vehicle model discrepancies between training and deployment. This paper proposes DIVA (Differentiable Identified Vehicle dynamics for end-to-end Autonomous driving) to close this gap. An identified actuator-level vehicle model is embedded in the training loop of the end-to-end driving network, forming a differentiable chain from perception to vehicle states. A learning-based control decoder replaces the external controller and is supervised on the rolled-out vehicle states, bypassing the aliased control-input labels. A rate-consistent control-input parameterization reconciles the heterogeneous sampling rates and enables asynchronous execution with a 3.8 ms control-only cycle. On-policy re-identification and an online disturbance observer address training-time distribution shift and deployment-time model mismatch respectively. On the closed-loop Bench2Drive benchmark, DIVA achieves a driving score of 86.7, surpassing the widely adopted state-of-the-art approach by 3.3 points while nearly halving mean jerk and reducing brake switching by 64%, and maintains superior path tracking accuracy under significant vehicle model mismatch at deployment.

0.18

Predictive safety filter enhanced curriculum learning control for efficient vehicle dynamics controller

cs.RO cs.AI ·2026-08-10 ·Baocong Zhang, Siliang Lu, Chenyang Li
similarity 0.57
Abstract

Recent advances in learning-based control have enabled impressive achievements in solving complex control problems in various domains. However, since learning-based control may not be able to realize safety-guaranties, it is of great importance to enhance safety and robustness while maintaining good performances. Take vehicle motion \& dynamics control as an example, in order to overcome the pain points of traditional methods such as heavy parameter calibration effort and learning-based control to bring better performance and efficiency in stability \& agility over prior work for state-based vehicle control tasks, in this work, our method aims to develop a curriculum learning controller enhanced with physics-based predictive safety filter. The validation is conducted with the Python-CarSim platform, demonstrating better improvements and scalability under various maneuvers.

0.04