CS Paper Radar

Decoupling Physical Speed from Path Parameterization in Singularity-Free Guiding Vector Fields

Zhouru Xiao, Sha Luo, Yang Lu, Mingliang Xiao, Weijia Yao, Bohuan Lin, Xianzhe Cheng, Yaonan Wang

cs.RO ·submitted 2026-09-17 05:34 UTC · v1

Abstract

The existing singularity-free guiding vector field (SF-GVF) with an additional virtual coordinate can eliminate singular points (i.e., points where the vector field vanishes) inherent in conventional GVFs and guarantee global convergence of robot trajectories to closed and self-intersecting desired paths. However, the desired speed given by the GVF along the desired path in the original lower-dimensional space cannot be arbitrarily specified but depends on path parameterizations. One possible workaround is to partially normalize the physical projection of the SF-GVF and assign a user-designed speed. However, we show that this workaround may introduce new singularities since the normalization denominator can become zero. To address this issue, we propose a new SF-GVF with prescribed physical speed (PPS). The integral curves of the new SF-GVF converge exponentially to the desired path from any initial condition in the higher-dimensional space (including virtual dimension); more importantly, the robot's physical speed converges to the PPS, while the path-error dynamics remain invariant under regular reparameterizations of the desired path. We further develop a saturated acceleration control law for second-order kinematic models. Finally, comparative simulations and 3D path-following experiments with a quadrotor under different PPS profiles validate the theoretical results and demonstrate the effectiveness of the proposed approach.

Closest papers

Nearest neighbours by meaning across the whole index.

Singularity-Free Guiding Vector Fields on SO(3) with Designer-Specified Progression Behavior

cs.RO ·2026-09-07 ·Jesus Bautista, Hector Garcia de Marina
similarity 0.63
Abstract · 12 pages, submitted to Automatica

This paper develops a singularity-free guiding vector field (SF-GVF) for path following on the special orthogonal group SO(3). First, we lift the Euclidean SF-GVF construction to SO(3), integrating the augmented-state approach with the intrinsic Lie-group geometry and obtaining a closed-form geometric guidance law whose integral curves converge to a designer-specified attitude path. The field is defined on a dense open subset of SO(3), excluding only the measure-zero antipodal set - a manifestation of the topological obstruction to continuous global stabilization on SO(3). The construction requires no per-step optimization and produces a control input intrinsically in so(3) as body angular rates. Second, we formalize the progression behavior along the path as a designer-supplied function ν(ξ), promoting the parametric speed from an implicitly resolved degree of freedom to a first-class design specification. In contrast to the Euclidean condition v = 0, which excludes vehicles with minimum-speed constraints, the corresponding condition ω= 0 on SO(3) is physically admissible for most platforms with active attitude control, making the progression behavior a design freedom structurally available on SO(3) but absent in the Euclidean setting. The framework's structural results are established under a bi-invariant Riemannian metric and hold uniformly across choices of path, progression, and Lyapunov gain. The framework is illustrated in simulation on self-intersecting paths under both constant and point-convergence progression behaviors.

0.52

Constructive Infinitely Differentiable Guidance Vector Fields for Robotic Control

cs.RO ·2026-11-18 ·Vinicius Mariano Goncalves, Peilin Wu, Adriano Rezende, Weijia Yao
similarity 0.61
Abstract

Guidance vector fields (GVFs) are a popular framework for tasks such as robotic path-following and multi-robot motion coordination, but existing approaches may be non-differentiable or have large derivatives, limiting their use in controllers that require derivatives of the guidance signal, which is common when the GVF is used as an input in a cascaded controller. This paper proposes an infinitely differentiable constructive GVF. The resulting vector field depends on a smoothing parameter and is a generalization of [1], recovering the original GVF in the limit as this parameter approaches zero. It also admits a simple and efficient implementation that preserves smoothness under discretization and can reduce computation time by using substantially fewer curve samples while maintaining small path-following errors. We establish the main theoretical properties and demonstrate its practical advantages through numerical and real-world experiments.

0.23

Flatness-Based Geometric Path Following via Guiding Vector Fields

eess.SY ·2026-10-06 ·J. P. van Gool, H. G. de Marina, B. Jayawardhana, S. Ahmed
similarity 0.59
Abstract

Path following requires an agent to converge to and traverse a geometric path without a prescribed timing law. Guiding vector fields (GVFs) address this directly, but as guidance laws they offer no mechanism to compensate for the agent's own dynamics. Differential flatness-based control (DFBC), on the other hand, compensates for the agent's nonlinear dynamics but relies on a time-parameterized reference trajectory. This letter presents a unified algorithm, which we term flatness-based geometric control (FGC), that generates the DFBC reference hierarchy directly from a GVF and its higher-order time derivatives, eliminating the need for a pre-planned time-parameterized trajectory while retaining full dynamics-informed control. A cascade Lyapunov argument establishes exponential convergence of the tracking error and the physical trajectory to the desired path. The framework is further extended to singularity-free GVFs, which removes the topological obstruction and guarantees the condition for global exponential convergence on closed or self-intersecting paths. The proposed algorithm is validated in simulation.

0.26

SC3BF: Shifted Collision Cone Control Barrier Function for Dynamic Obstacle Avoidance

cs.RO cs.MAeess.SY ·2026-10-06 ·Amin Kashiri, Yasin Yazıcıoğlu
theory similarity 0.58
Abstract · Submitted to the 2027 American Control Conference (ACC)

The collision cone used by velocity-space control barrier functions is conservative: it rejects every relative velocity aimed into an obstacle, however slow. We propose the \emph{shifted collision-cone CBF} (SC3BF), which adds a state-dependent \emph{allowance} to the cone condition, so the robot may approach the obstacle at a rate that grows with distance and with its own speed. SC3BF is enforced by an ordinary quadratic program, and its safe set is forward invariant under bounded inputs without a minimum forward speed or a clearance margin. We prove that a nonzero allowance preserving safety always exists, and derive one in closed form. Against three velocity-space baselines on a kinematic bicycle among up to $100$ moving obstacles, SC3BF reaches the goal more often and modifies the nominal input less than half as much.

0.40

DIVAL: Diffeomorphic Vector-Field Alignment for Nonholonomic Motion Planning

cs.RO eess.SY ·2026-11-11 ·Yike Qiao, Xiaodong He, An Zhuo, Zhiyong Sun, Weimin Bao +1 more
similarity 0.57
Abstract · 19 pages, 12 figures, under review

Conventional vector-field-based motion planners for nonholonomic robots consist of two steps: first designing a nominal vector field and then controlling the robot to follow it to approach the target. However, a nonholonomic robot cannot follow the vector field instantaneously and may collide with obstacles, due to the inevitable mismatch between the robot's initial heading and the vector field's direction. This paper proposes a diffeomorphic vector-field alignment (DIVAL) method, which aligns the vector field's direction with the robot's initial heading so the robot can follow the vector field from the start. Specifically, the nominal vector field is locally reshaped by applying a diffeomorphic deformation to the workspace, such that the reshaped vector field has the same direction as the robot's heading at the initial position and coincides with the nominal vector field outside the deformed region. Since DIVAL eliminates the initial heading mismatch, the nonholonomic robot can maintain heading alignment with the reshaped vector field throughout the motion. This heading alignment further ensures that the robot preserves the nominal vector field's properties, including obstacle avoidance, convergence to the target, and smooth control signals. Numerical simulations provide vector-field-tracking baselines where the nominal vector fields are reshaped with DIVAL. Compared to the original baselines, the proposed method achieves collision-free convergence in all trials and avoids control discontinuities. Hardware experiments on a ground vehicle further demonstrate collision-free convergence across different targets and initial conditions under real-world disturbances.

0.28

ReVAMP: Vector-Accelerated Motion Planning for Kinematically-Constrained Systems via Reparameterization

cs.RO ·2026-09-24 ·Shrutheesh R. Iyer, Thomas Cohn, Zachary Kingston
similarity 0.57
Abstract

Robots often must satisfy one or more constraints during motion planning for real-world tasks. When such constraints reduce the valid configuration space to a measure-zero subset, sampling based planning algorithms require modifications to draw feasible samples. For many common end-effector constraints, parameterizations built on inverse kinematics (IK) provide an alternate formulation where the constraints are satisfied by construction, allowing directly sampling the feasible set. Despite their elegant approach, parameterized planners have remained slower than vector-accelerated implementations of projection-based approaches, leaving their performance ceiling an open question. We explore a new axis of vectorization built upon reparameterizing the planning space through analytic IK. This approach addresses existing inefficiencies in vectorized projection-based planners and exposes new opportunities for parallelism within the planner. We show that the planner can synthesize plans in microseconds to milliseconds for high dimensional systems (up to 20 dimensions), with complex constraints, up to 10x faster than the current state-of-the-art. Furthermore, we demonstrate how such planning speeds open up avenues for restructuring sequential manipulation pipelines.

0.19

FLASH-CBF-RRT: Fast Lipschitz-Adaptive Safe Horizon CBF Steering for Certified Motion Planning

cs.RO ·2026-10-16 ·Mani Amani, Hesam Mojtahedi, Reza Akhavian, Nikolay Atanasov, Ki Myung Brian Lee
similarity 0.57
Abstract

Fast motion planning requires both sample-efficient exploration and computationally efficient local steering. Conventional straight-line steering is inexpensive but wastes samples by rejecting colliding extensions. Quadratic program controllers with control barrier function (CBF) constraints can be used to achieve effective local steering but can increase the planning time due to the expensive sequential evaluations. We develop a method to accelerate CBF steering by computing a time horizon within which CBF-filtered velocity may be applied constantly using closed-form kinematic bounds on collision-clearance. Our method, FLASH-CBF-RRT, significantly reduces the number of evaluations compared to prior CBF-RRT approaches because the planner can take adaptive steering step sizes that are shorter near obstacles and longer in open space. We implement this steering procedure as an extension of RRT-Connect in OMPL. Across 689 MotionBenchMaker problems, FLASH-CBF-RRT matches RRT-Connect's 100% success rate while reducing median planning time by 3.82x, and is 3.88x faster than fixed-step CBF-RRT. Hardware experiments on a 17-DoF mobile manipulator demonstrate 2.2x faster planning and 4.2x fewer evaluations. Videos and results are available at: https://mamani828.github.io/FLASH-CBF-RRT/.

0.18

Distributed Safe Cooperative Vector Field for Trajectory Curvature Constrained Multi-Robot Systems

cs.RO ·2026-09-14 ·Zhouru Xiao, Tao Teng, Weijia Yao, Hui Zhang, Xiangke Wang +1 more
similarity 0.57
Abstract · 12 pages, 4 figures. Best Student Paper Award at the 9th Chinese Conference on Swarm Intelligence and Cooperative Control (CCSICC 2025)

Trajectory curvature constraints are inherent in practical multi-robot systems due to the limited turning capabilities of the robots. Without properly accounting for these constraints, robots may fail to accomplish assigned tasks, and their trajectories may diverge from the intended paths. This paper proposes a distributed safe cooperative vector field approach for multi-robot systems subject to trajectory curvature constraints. The proposed approach is composed of a cooperative vector field and a safety-oriented collision avoidance vector field, aiming to address the problems of cooperative motion and safe collision avoidance in multi-robot path-following tasks. A safety-oriented collision avoidance vector field with adaptively adjustable reactive boundary is developed to accommodate the kinematic curvature constraints of robots, thereby ensuring the physical feasibility of collision avoidance maneuvers. The proposed vector field requires only a single virtual variable from each neighboring robot to achieve cooperative motion and ensure both obstacle avoidance and inter-robot collision avoidance. The effectiveness of the proposed approach is validated through both simulations and real-world experiments on an actual multi-robot platform.

0.39