CS Paper Radar

FLASH-CBF-RRT: Fast Lipschitz-Adaptive Safe Horizon CBF Steering for Certified Motion Planning

Mani Amani, Hesam Mojtahedi, Reza Akhavian, Nikolay Atanasov, Ki Myung Brian Lee

cs.RO ·submitted 2026-10-16 19:22 UTC · v1

Abstract

Fast motion planning requires both sample-efficient exploration and computationally efficient local steering. Conventional straight-line steering is inexpensive but wastes samples by rejecting colliding extensions. Quadratic program controllers with control barrier function (CBF) constraints can be used to achieve effective local steering but can increase the planning time due to the expensive sequential evaluations. We develop a method to accelerate CBF steering by computing a time horizon within which CBF-filtered velocity may be applied constantly using closed-form kinematic bounds on collision-clearance. Our method, FLASH-CBF-RRT, significantly reduces the number of evaluations compared to prior CBF-RRT approaches because the planner can take adaptive steering step sizes that are shorter near obstacles and longer in open space. We implement this steering procedure as an extension of RRT-Connect in OMPL. Across 689 MotionBenchMaker problems, FLASH-CBF-RRT matches RRT-Connect's 100% success rate while reducing median planning time by 3.82x, and is 3.88x faster than fixed-step CBF-RRT. Hardware experiments on a 17-DoF mobile manipulator demonstrate 2.2x faster planning and 4.2x fewer evaluations. Videos and results are available at: https://mamani828.github.io/FLASH-CBF-RRT/.

Closest papers

Nearest neighbours by meaning across the whole index.

SCET-CBF: Speed-Calibrated Soft Guidance for One-Step Dynamic Navigation

cs.RO ·2026-10-24 ·Xiaoyu Han, Dongkun Han
similarity 0.73
Abstract · 9 pages, 6 figures

Control barrier functions (CBFs) support collision avoidance, yet dense dynamic encounters can leave a vehicle with no feasible command. Geometric refinements and soft constraints help preserve motion choices. Using these choices also requires accounting for the vehicle's changing turning response. For a steering-limited bicycle, braking can lower closing speed while slowing the lateral motion needed before an obstacle arrives. We propose SCET-CBF, a speed-calibrated soft guidance law for one-step dynamic navigation. A short lateral escape maneuver gives an allowable approach speed. Its speed derivative allows a quadratic program to weigh both effects of braking when choosing acceleration and steering. Soft penalties accommodate competing obstacle preferences within the input set permitted by segment and braking constraints. We derive the guidance and establish protection over each accepted motion segment, together with conditional braking invariance for a single obstacle. On 2500 paired tasks with a 60 s deadline, SCET achieves 72.8% completion, compared with 49.8% for CBF/velocity-obstacle control and 69.8% for an enhanced 1 s CBF-MPC. At 100 obstacles, SCET and the enhanced MPC complete 52.4% and 33.6% of tasks. Paired studies identify the contributions of speed feedback and early activation. Further evaluations examine the operating range under lateral acceleration limits and bounded motion and execution errors.

0.13

OcclusionCBF: Backup Control Barrier Functions for Safe Navigation Among Hidden Dynamic Obstacles

cs.RO eess.SY ·2026-09-06 ·Taekyung Kim, Hun Kuk Park, Renya Wada, Nikolay Atanasov, Shumon Koga +1 more
code/data similarity 0.69
Abstract · The first two authors contributed equally to this work. Project page: https://www.taekyung.me/occlusion-cbf

Robots navigating under occlusion may enter states from which no admissible input can avoid a dynamic obstacle once it becomes visible. We present OcclusionCBF, a safety filter that extends backup control barrier functions to reachable-occupancy predictions for potentially hidden dynamic obstacles in occluded regions. The method certifies a prescribed backup rollout against collision-inflated occupancy and a verified terminal set, yielding affine constraints for minimally invasive quadratic-program filtering. We establish recursive feasibility of the resulting safety filter, and collision avoidance for every hidden-obstacle motion covered by the occupancy prediction. Randomized benchmarks, MetaUrban simulations, and hardware experiments demonstrate improved task success over reactive and occlusion-aware predictive baselines with millisecond-scale computation.

0.40

DynoFluxBench: Benchmarking Kinodynamic Space-Time Planners in Dynamic Environments

cs.RO ·2026-09-16 ·Franz Queißner, Andreas Orthey, Wolfgang Hönig
benchmark similarity 0.67
Abstract · 8 pages

Robots that leave structured, static environments must plan motions that are kinodynamically feasible and safe among moving obstacles. However, there are no dedicated benchmark frameworks that combine both aspects. To overcome this, we present DynoFluxBench, a framework to compare kinodynamic planners in known, dynamic environments with unbounded arrival time. To demonstrate its utility and establish strong baselines, we develop three dedicated planners, named ST-Db-RRT, ST-GBRRT, and KIST, that fuse kinodynamic and space-time methods, covering different kinodynamic search paradigms: ST-Db-RRT expands with randomly selected discontinuity-bounded motion primitives using trajectory optimization, whereas KIST and ST-GBRRT maintain a kinodynamically feasible tree with different heuristic guidance. We analyze the probabilistic completeness guarantees of those new planners in dynamic environments. Finally, we evaluate ST-Db-RRT, ST-GBRRT, and KIST using DynoFluxBench, showing that ST-Db-RRT reaches a first solution up to 32 times faster, while KIST and ST-GBRRT remain valuable where trajectory optimization is fragile. Videos and further analysis can be found at https://dynofluxbench.github.io/dynofluxbench/.

0.32

BIG-CBF: Behavior-Imagination-Guided Control Barrier Function with Shared Uncertainty for Mobile Robot Navigation

cs.RO ·2026-09-13 ·Shibo Li, Zhongcheng Wang, Jiahe Cao, Jianhua Yang, Ke Wu
benchmark similarity 0.67
Abstract

Control barrier functions (CBFs) provide a mathematically grounded framework for enforcing local collision-avoidance constraints in autonomous mobile robots, commonly through optimization-based safety filters. However, a minimum-intervention CBF filter lacks task-level maneuver awareness and may fail to select a productive avoidance direction when multiple distinct maneuvers are locally viable, leading to safe but stalled behavior in geometrically ambiguous environments. This paper presents BIG-CBF, Behavior-Imagination-Guided Control Barrier Function with shared uncertainty, a two-rate navigation architecture that separates low-rate maneuver selection from high-rate safety filtering. Over a short horizon, six closed-loop feedback behaviors are imagined and evaluated using analytic CBF compatibility together with a lightweight objective accounting for task progress, freezing, smoothness, and switching. To reduce planning-execution mismatch, the imagination and execution layers share consistent uncertainty sources for relative-motion delay, obstacle prediction, zero-order-hold motion, and command-execution residuals, while a hard CBF remains the final safety authority. In a 3,600-episode comparative benchmark across nine scenarios, BIG-CBF achieves the highest overall task success rate of 99.78% while substantially reducing downstream CBF intervention. On a physical omnidirectional robot with onboard Jetson Orin Nano computation, BIG-CBF completes all 15 evaluation runs without a recorded contact event. Matched hardware comparisons against the non-shared variant further show lower CBF intervention energy and activation frequency, supporting improved consistency between maneuver selection and safety-critical execution.

0.25

DetAug: Obstacle-Blind Trajectory Augmentation for Zero-shot Obstacle Avoidance

cs.RO ·2026-09-16 ·Reece O'Mahoney, Moritz Zoellner, Ioannis Havoutis
benchmark similarity 0.66
Abstract

Policies for robotic manipulation are produced by training on large teleoperated datasets. These datasets typically consist of free-space trajectories, making them difficult to transfer to test-time environments with obstacles. Previous methods for closing this gap have largely fallen into two groups. Dataset augmentation addresses it at training time but needs obstacle geometry in advance, whereas steering an existing checkpoint at inference time avoids that requirement but is limited in flexibility. Our method draws from both areas without inheriting either drawback. DetAug applies an obstacle-blind augmentation scheme to the transit phases of a free-space dataset, leaving object interactions untouched, and records the augmentation parameters as an explicit conditioning label. At inference it samples a batch of labels and executes the trajectory with the lowest collision cost. On the SafeLIBERO benchmark DetAug achieves a collision-free success rate more than 20pp above the next best method, and selecting over the label space outperforms guidance on the same policy by 26pp. On real hardware, inference-time steering methods collapse on tasks requiring large detours, while DetAug matches or exceeds an obstacle-conditioned baseline without ever seeing obstacles in training.

0.28

Efficient Bezier Velocity Optimization for Free-Floating Space Manipulators

cs.RO ·2026-09-25 ·Duo Zhang, Zhizhuo Zhang, Xiaoli Bai, Jingjin Yu
similarity 0.65
Abstract

We present FAVOR (Free-floating Arm Velocity Optimization with Recursive Sensitivities), a planner for collision-free reaching, tracking, and prescribed-time pre-grasp interception on an unactuated spacecraft. It optimizes Bezier joint-velocity curves with linear velocity, acceleration, and continuity constraints. Decision dimension is independent of rollout resolution. Analytical recursive sensitivities provide task and clearance gradients through the coupled base-arm motion. Parallel evaluation, caching, and incremental collision discovery reduce computation. With a seven-DoF arm and five simulated spacecraft models, FAVOR achieves 99.8% point-to-point success with 1.779 s mean computation, versus 62.9% and 50.270 s for an IK-initialized position-spline baseline. Means include failures and timeouts. FAVOR completes 30 of 36 tracking cases, versus 15 for single-step QP, and all 36 interception instances, versus 22 for the spline baseline. A controlled ablation shows that finite differences increase mean planning time 4.7-fold.

0.23

Online, Reachability-Aware, Sampling-Based Motion Planning

cs.RO eess.SY ·2026-09-08 ·Brendan Gould, Zhiyuan Zhang, Panagiotis Tsiotras, Samuel Coogan
similarity 0.65
Abstract · 8 pages, 1 figure

Sampling-Based Model-Predictive Control (MPC) algorithms are a flexible class of controllers used for navigation on a wide range of robotic systems. Historically, such approaches have lacked hard safety guarantees, a shortcoming which we remedy in this work by computing guaranteed reachable-set overapproximations online with a fast, interval-based pipeline. We show that our method achieves similar performance to a state-of-the-art reachability-based planner without the need for the expensive pre-computation step, and can be scaled to systems that are infeasible using existing approaches. Finally, we demonstrate that our technique reduces safety violations by over 99% in a racing simulation and successfully controls a model racecar on real hardware experiments without crashes.

0.19

CQDC-Warp: GPU-Accelerated Differentiable Quasi-Dynamic Simulation for Contact-Rich Manipulation

cs.RO ·2026-10-15 ·Yanchen Ding, Jiayi Chen, Jianfeng Xu, Wei Zhao, Li Yi +1 more
benchmark similarity 0.65
Abstract

Efficient synthesis of contact-rich manipulation trajectories is essential for downstream robot learning. Gradient-based planning offers a promising approach, but jointly optimizing motion and contact decisions remains challenging. Meanwhile, many existing planners run on CPUs with limited throughput. We present CQDC-Warp, a GPU-accelerated differentiable quasi-dynamic simulator for batched model predictive control (MPC). We use it to study contact-guided trajectory optimization, in which intended robot--object contacts are specified before planning and encouraged through soft costs, while the simulated dynamics determine contact geometry and frictional response without a prescribed contact-mode schedule. Across $17{,}408$ trials on the $17$-object Allegro in-hand rotation benchmark, our framework achieves $79.8\%$ success, compared with $73.7\%$ for CFree and $65.2\%$ for IMPACT, and reduces mean trajectory-generation time by factors of $27.0$ and $50.2$, respectively. On a single NVIDIA RTX 4090 with $2{,}048$ parallel worlds, forward and backward throughput reach $2.06\times10^5$ and $2.25\times10^5$ world-steps per second, respectively. Further experiments cover manipulation with LEAP and Shadow hands, environmental contact exploitation, bimanual manipulation, whole-body control, and real-world trajectory replay on a Sharpa hand.

0.12