CS Paper Radar

Efficient Bezier Velocity Optimization for Free-Floating Space Manipulators

Duo Zhang, Zhizhuo Zhang, Xiaoli Bai, Jingjin Yu

cs.RO ·submitted 2026-09-25 18:17 UTC · v2

Abstract

We present FAVOR (Free-floating Arm Velocity Optimization with Recursive Sensitivities), a planner for collision-free reaching, tracking, and prescribed-time pre-grasp interception on an unactuated spacecraft. It optimizes Bezier joint-velocity curves with linear velocity, acceleration, and continuity constraints. Decision dimension is independent of rollout resolution. Analytical recursive sensitivities provide task and clearance gradients through the coupled base-arm motion. Parallel evaluation, caching, and incremental collision discovery reduce computation. With a seven-DoF arm and five simulated spacecraft models, FAVOR achieves 99.8% point-to-point success with 1.779 s mean computation, versus 62.9% and 50.270 s for an IK-initialized position-spline baseline. Means include failures and timeouts. FAVOR completes 30 of 36 tracking cases, versus 15 for single-step QP, and all 36 interception instances, versus 22 for the spline baseline. A controlled ablation shows that finite differences increase mean planning time 4.7-fold.

Closest papers

Nearest neighbours by meaning across the whole index.

FLASH-CBF-RRT: Fast Lipschitz-Adaptive Safe Horizon CBF Steering for Certified Motion Planning

cs.RO ·2026-10-16 ·Mani Amani, Hesam Mojtahedi, Reza Akhavian, Nikolay Atanasov, Ki Myung Brian Lee
similarity 0.65
Abstract

Fast motion planning requires both sample-efficient exploration and computationally efficient local steering. Conventional straight-line steering is inexpensive but wastes samples by rejecting colliding extensions. Quadratic program controllers with control barrier function (CBF) constraints can be used to achieve effective local steering but can increase the planning time due to the expensive sequential evaluations. We develop a method to accelerate CBF steering by computing a time horizon within which CBF-filtered velocity may be applied constantly using closed-form kinematic bounds on collision-clearance. Our method, FLASH-CBF-RRT, significantly reduces the number of evaluations compared to prior CBF-RRT approaches because the planner can take adaptive steering step sizes that are shorter near obstacles and longer in open space. We implement this steering procedure as an extension of RRT-Connect in OMPL. Across 689 MotionBenchMaker problems, FLASH-CBF-RRT matches RRT-Connect's 100% success rate while reducing median planning time by 3.82x, and is 3.88x faster than fixed-step CBF-RRT. Hardware experiments on a 17-DoF mobile manipulator demonstrate 2.2x faster planning and 4.2x fewer evaluations. Videos and results are available at: https://mamani828.github.io/FLASH-CBF-RRT/.

0.18

Contact-Rich Motion Planning via GPU-Parallel Mode Evaluation

cs.RO ·2026-09-18 ·Jiayun Li, Georgia Chalvatzaki
similarity 0.64
Abstract

Contact-rich motion planning (CRMP) is essential for robotic manipulation and locomotion, yet remains computationally challenging due to combinatorial contact decisions. Existing methods typically avoid broad evaluation of contact-mode sequences through search heuristics or optimization reformulations. We revisit broad evaluation in light of modern GPU hardware and introduce Contact-Mode Expansion with parallel Trajectory optimization (CoMET), which combines GPU-parallel trajectory evaluation with greedy contact-mode expansion. On planar pushing benchmarks, CoMET is competitive with optimization-based, sampling, and tree-search baselines in solution quality and planning time, matching the full-enumeration reference on nearly all instances with fewer evaluations and shorter planning times. Ablations suggest that much of the performance gain comes from the high-throughput trajectory evaluator. In bimanual nonprehensile manipulation, GPU-friendly local mode expansion achieves higher planning success than the tested adaptive tree search as the mode space grows. These results demonstrate that broad explicit mode evaluation provides a simple yet effective alternative for CRMP.

0.25

AstroBench: Benchmarking Free-Floating Capture and Space Robotic Manipulation

cs.RO ·2026-10-22 ·Zizhe Wang, Jia Deng, Xin Lu, Zehao Jia, Yi Huang +1 more
benchmarkcode/data similarity 0.64
Abstract · 12 pages, 5 figures, 9 tables. Code and assets: https://github.com/AstroUpLab/AstroBench ; project website: https://astroup.com/astrobench/

Capturing a loose object inside a spacecraft requires a robot to approach a target that can translate and rotate, and whose motion changes when contact is made. These conditions motivate evaluation beyond manipulation of supported objects. We introduce AstroBench, an open benchmark for free-floating capture and space robotic manipulation with a fixed-base arm. The task suite combines four initial-motion tracks with sample-storage operations based on MELFI hardware and cap and captive-screw servicing based on the Robotic Refueling Mission. The two workcells provide nine task definitions and 29 task-target combinations. A metadata-filtered Objaverse inventory supplies 8,414 object instances for asset expansion, alongside five cabin visual contexts and versioned task instructions. We report two acquisition-focused experiments using existing checkpoints. A frozen $π_{0.5}$ DROID joint-position policy captures 2 of 200 static targets and 4 of 200 moving targets across twenty object identities. A cube-specific ACT policy captures 8 of 10 static targets and 6 of 10 moving targets in a separate experiment. Each experiment retains its recorded observation, action and capture configuration. The results document difficult direct transfer for the tested generalist checkpoint and successful task-specific capture behavior, while identifying concrete settings for studying motion-aware perception and contact-sensitive control. Code, task definitions and editable workcell assets are available at https://github.com/AstroUpLab/AstroBench.

0.26

Decentralized Guidance and Control for Rendezvous and Docking with a Tumbling Target using Multiple Servicers

eess.SY ·2026-09-22 ·Jonathan Taylor Jönsson, Sathyanarayanan Seshasayanan, Sumeet Gajanan Satpute, George Nikolakopoulos
publishedhot direction similarity 0.62
Abstract · Accepted as a contributing paper to the iSpaRo 2026 conference

The growing trend of miniaturization in space, combined with an exponential increase in orbital debris, motivates a new operational paradigm, that is the deployment of multiple small servicers to collectively rendezvous, dock and service large tumbling targets. A single small spacecraft is often limited in thrust or reach for such targets, yet coordinating multiple autonomous spacecraft safely in close proximity remains an open challenge. This paper presents a proof-of-concept decentralized 6-DOF model predictive control (MPC) framework for multiple servicers to safely rendezvous and dock (RVD) to a tumbling target with no knowledge about each others predicted input over the prediction horizon. The proposed framework enforces soft docking conditions, inter-servicer collision avoidance, and obstacle avoidance through embedded constraints, while remaining computationally tractable via a linear time-invariant (LTI) formulation. Validation in MATLAB with three servicers and fixed obstacle arrangements confirms that all constraints are satisfied and successful docking is achieved.

0.37

PPO vs. SAC: A Comparative Study for Cooperative Motion Control of Dual-Arm Space Robots

cs.AI ·2026-10-23 ·Nasim Fallahiarezoodar, Zheng H. Zhu
published similarity 0.61
Abstract · Presented at the 2026 AAS/AIAA Astrodynamics Specialist Conference, Whistler, British Columbia, Canada, July 26-30, 2026. Paper AAS 26-740

The growing population of orbital debris has intensified interest in active debris removal and on-orbit servicing, for which dual-arm space manipulators offer improved grasping stability and load distribution relative to single-arm systems. However, coordinating two manipulators under inter-arm collision avoidance, orientation alignment, and sensing uncertainty remains challenging. This paper develops a coordinated reinforcement learning framework for cooperative motion planning of a dual-arm space manipulator in a target-reaching task with inter-arm collision-avoidance constraints. A centralized state representation combines joint-space, end-effector, and target-relative information, while a multi-objective reward function promotes target-reaching accuracy, orientation alignment, motion smoothness, synchronized task completion, and collision avoidance. Within this framework, Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC) are compared as representative on-policy and off-policy algorithms, and the learned policies are further evaluated for generalization to previously unseen target configurations. Across five random seeds, SAC substantially outperforms PPO within the considered fixed-base simulation scenarios: it reaches an 80% success threshold in every seed (median 1.6M environment steps) whereas PPO does not reach it within a 4M-step budget, and it attains a higher mean success rate (78.6% versus 7.4%) with lower position and orientation errors and tighter bimanual synchronization. Both algorithms degrade on unseen boundary targets, but SAC retains most of its performance while PPO's collapses. The results also expose a failure mode of PPO: under the two-phase shaped reward, it tends to converge to a reward-loitering local optimum rather than committing to the precision task. This behavior highlights the sensitivity of on-policy learning to reward shaping.

0.24

ReVAMP: Vector-Accelerated Motion Planning for Kinematically-Constrained Systems via Reparameterization

cs.RO ·2026-09-24 ·Shrutheesh R. Iyer, Thomas Cohn, Zachary Kingston
similarity 0.61
Abstract

Robots often must satisfy one or more constraints during motion planning for real-world tasks. When such constraints reduce the valid configuration space to a measure-zero subset, sampling based planning algorithms require modifications to draw feasible samples. For many common end-effector constraints, parameterizations built on inverse kinematics (IK) provide an alternate formulation where the constraints are satisfied by construction, allowing directly sampling the feasible set. Despite their elegant approach, parameterized planners have remained slower than vector-accelerated implementations of projection-based approaches, leaving their performance ceiling an open question. We explore a new axis of vectorization built upon reparameterizing the planning space through analytic IK. This approach addresses existing inefficiencies in vectorized projection-based planners and exposes new opportunities for parallelism within the planner. We show that the planner can synthesize plans in microseconds to milliseconds for high dimensional systems (up to 20 dimensions), with complex constraints, up to 10x faster than the current state-of-the-art. Furthermore, we demonstrate how such planning speeds open up avenues for restructuring sequential manipulation pipelines.

0.19

APEX-RBD: Mixed-Precision Exploration Framework for Hardware-Efficient Robot Dynamics Accelerator Design

cs.AR cs.RO ·2026-09-04 ·Xingyu Liu, Hanwei Fan, Chaofang Ma, Jiawei Liang, Guangyu Hu +2 more
similarity 0.61
Abstract

Rigid Body Dynamics (RBD) forms the computational core of real-time robotic control, but its immense computational complexity creates a performance bottleneck that necessitates dedicated hardware accelerators. However, the substantial hardware resource and power costs of these accelerators make their deployment on resource-constrained edge platforms highly challenging. While quantization offers a promising path to optimize RBD hardware for edge computing, existing uniform-precision approaches remain inefficient by ignoring the diverse quantization sensitivities of different variables. Although mixed-precision offers a superior alternative, its exploration is intractable due to a vast search space and the prohibitive cost of closed-loop simulation for motion accuracy evaluation. To address these challenges, we introduce APEX-RBD, an automated framework that makes mixed-precision exploration computationally tractable while effectively identifying hardware-efficient configurations. Specifically, it performs physics-driven search space pruning via variable grouping and sensitivity analysis, and employs a data-efficient, prior-informed surrogate model to enable rapid trajectory error prediction. This formulation guides a hybrid optimizer to identify area- and power-efficient designs under user-defined accuracy and performance constraints. Experimental results demonstrate that APEX-RBD discovers designs achieving up to 1.9$\times$ area reduction and 1.8$\times$ power savings compared to uniform-precision baselines across diverse robotic platforms.

0.09

PRISM: Projection-Integrated Sampling-Based MPC with Bayesian Cost Tuning for Bimanual Manipulation

cs.RO ·2026-08-26 ·Alinjar Dan, Iryna Hurova, Karl Kruusamäe, Arun Kumar Singh
code/data similarity 0.61
Abstract

Bimanual manipulation in cluttered, contact-rich environments remains challenging because it requires coordinated motion generation, interaction-aware planning, and reliable execution under tight kinematic constraints. We present PRISM, a projection-integrated sampling-based Model Predictive Control (MPC) framework that uses a GPU-accelerated physics simulator as an online world model for complex dual-arm manipulation. The main algorithmic contribution is a QP-guided control sampling strategy that decouples trajectory exploration from kinematic feasibility. At each MPC step, sampled joint-velocity trajectories are projected onto the set of motions satisfying joint position, velocity, acceleration, and jerk bounds, together with an initial-velocity boundary condition, before rollout evaluation. This enables broad yet feasible exploration of coordinated bimanual behaviors. To support efficient online execution, we derive a custom ADMM/Bregman-splitting QP solver that exploits joint-wise separability and reusable matrix factorizations. We further use Bayesian optimization to tune task-cost weights offline, reducing manual parameter selection. We evaluate PRISM on challenging variants of PerAct$^{2}$ tasks, including obstacle-constrained ball transport, tray transport, cube handover, and box lifting. Experiments show improved robustness and task success relative to representative sampling-based baselines, while maintaining real-time or near-real-time execution. We also demonstrate successful sim-to-real transfer on dual UR5e manipulators, highlighting the practical potential of physics-based online planning for contact-rich bimanual manipulation. Project details, including code and supplementary videos, are available at \href{https://sites.google.com/view/prismbimanual}{\texttt{https://sites.google.com/view/prismbimanual}}.

0.18