CS Paper Radar

DIVAL: Diffeomorphic Vector-Field Alignment for Nonholonomic Motion Planning

Yike Qiao, Xiaodong He, An Zhuo, Zhiyong Sun, Weimin Bao, Zhongkui Li

cs.RO eess.SY ·submitted 2026-11-11 02:22 UTC · v1

Abstract

Conventional vector-field-based motion planners for nonholonomic robots consist of two steps: first designing a nominal vector field and then controlling the robot to follow it to approach the target. However, a nonholonomic robot cannot follow the vector field instantaneously and may collide with obstacles, due to the inevitable mismatch between the robot's initial heading and the vector field's direction. This paper proposes a diffeomorphic vector-field alignment (DIVAL) method, which aligns the vector field's direction with the robot's initial heading so the robot can follow the vector field from the start. Specifically, the nominal vector field is locally reshaped by applying a diffeomorphic deformation to the workspace, such that the reshaped vector field has the same direction as the robot's heading at the initial position and coincides with the nominal vector field outside the deformed region. Since DIVAL eliminates the initial heading mismatch, the nonholonomic robot can maintain heading alignment with the reshaped vector field throughout the motion. This heading alignment further ensures that the robot preserves the nominal vector field's properties, including obstacle avoidance, convergence to the target, and smooth control signals. Numerical simulations provide vector-field-tracking baselines where the nominal vector fields are reshaped with DIVAL. Compared to the original baselines, the proposed method achieves collision-free convergence in all trials and avoids control discontinuities. Hardware experiments on a ground vehicle further demonstrate collision-free convergence across different targets and initial conditions under real-world disturbances.

Comment
19 pages, 12 figures, under review

Closest papers

Nearest neighbours by meaning across the whole index.

Decoupling Physical Speed from Path Parameterization in Singularity-Free Guiding Vector Fields

cs.RO ·2026-09-17 ·Zhouru Xiao, Sha Luo, Yang Lu, Mingliang Xiao, Weijia Yao +3 more
similarity 0.57
Abstract

The existing singularity-free guiding vector field (SF-GVF) with an additional virtual coordinate can eliminate singular points (i.e., points where the vector field vanishes) inherent in conventional GVFs and guarantee global convergence of robot trajectories to closed and self-intersecting desired paths. However, the desired speed given by the GVF along the desired path in the original lower-dimensional space cannot be arbitrarily specified but depends on path parameterizations. One possible workaround is to partially normalize the physical projection of the SF-GVF and assign a user-designed speed. However, we show that this workaround may introduce new singularities since the normalization denominator can become zero. To address this issue, we propose a new SF-GVF with prescribed physical speed (PPS). The integral curves of the new SF-GVF converge exponentially to the desired path from any initial condition in the higher-dimensional space (including virtual dimension); more importantly, the robot's physical speed converges to the PPS, while the path-error dynamics remain invariant under regular reparameterizations of the desired path. We further develop a saturated acceleration control law for second-order kinematic models. Finally, comparative simulations and 3D path-following experiments with a quadrotor under different PPS profiles validate the theoretical results and demonstrate the effectiveness of the proposed approach.

0.30

Distributed Safe Cooperative Vector Field for Trajectory Curvature Constrained Multi-Robot Systems

cs.RO ·2026-09-14 ·Zhouru Xiao, Tao Teng, Weijia Yao, Hui Zhang, Xiangke Wang +1 more
similarity 0.57
Abstract · 12 pages, 4 figures. Best Student Paper Award at the 9th Chinese Conference on Swarm Intelligence and Cooperative Control (CCSICC 2025)

Trajectory curvature constraints are inherent in practical multi-robot systems due to the limited turning capabilities of the robots. Without properly accounting for these constraints, robots may fail to accomplish assigned tasks, and their trajectories may diverge from the intended paths. This paper proposes a distributed safe cooperative vector field approach for multi-robot systems subject to trajectory curvature constraints. The proposed approach is composed of a cooperative vector field and a safety-oriented collision avoidance vector field, aiming to address the problems of cooperative motion and safe collision avoidance in multi-robot path-following tasks. A safety-oriented collision avoidance vector field with adaptively adjustable reactive boundary is developed to accommodate the kinematic curvature constraints of robots, thereby ensuring the physical feasibility of collision avoidance maneuvers. The proposed vector field requires only a single virtual variable from each neighboring robot to achieve cooperative motion and ensure both obstacle avoidance and inter-robot collision avoidance. The effectiveness of the proposed approach is validated through both simulations and real-world experiments on an actual multi-robot platform.

0.39

Assignment-Free Swarm Navigation via Adaptive Target-Field Planning and Mean-Shift Exploration

eess.SY ·2026-11-03 ·Jiaxuan Li, Junhui Zhang, Bo Zhu
similarity 0.54
Abstract

Mean-shift exploration enables assignment-free swarm shape assembly, but obstacle-constrained navigation additionally requires coordinated adaptation of the desired morphology and its physical execution. This paper presents an environment-adaptive navigation framework that integrates target-field planning, execution regulation, and morphology-preserving mean-shift exploration. A feasibility-aware graph search plans the position, orientation, and morphology of an unlabeled target field without specifying robot-specific goals. An execution-regulated reference manager adjusts field progression and morphology switching using swarm entering, coverage, and lag metrics. A moving-frame controller separates prescribed rigid motion from local mean-shift redistribution and incorporates neighbor interactions and obstacle responses. Simulations and hardware experiments demonstrate that the proposed framework coordinates morphology transitions and collective motion for assignment-free swarm navigation through cluttered environments.

0.32

Tutorial: Vision-Based Formation Control with Differential-Drive Robots

cs.RO ·2026-11-08 ·Christian Marowski, Byung-Cheol Min
code/data similarity 0.54
Abstract

This tutorial presents a step-by-step introduction to multi-robot formation control using differential- drive robots, an overhead camera, and Python. ArUco markers are used to estimate robot positions and orientations, while desired pairwise displacement vectors define a circular formation. By comparing measured and desired relative positions, the controller computes movement vectors that are converted into differential-drive wheel commands, with basic proximity-sensor-based obstacle avoidance. The tutorial guides readers through hardware and software setup, robot pose estimation, formation geometry, feedback control, system integration, and formation-error evaluation. Motivated by the need to bridge the gap between theoretical understanding and practical implementation in robotics education, we emphasize how mathematical concepts are translated into coordinated behaviors on physical robots. Although the implementation uses a specific robotic platform, the underlying perception and formation-control principles can be adapted to other differential-drive robots and simulation environments. The accompanying open-source GitHub repository provides the Python implementation, setup instructions, and demonstrations to support hands-on learning and further exploration of multi-robot systems.

0.42

Constructive Infinitely Differentiable Guidance Vector Fields for Robotic Control

cs.RO ·2026-11-18 ·Vinicius Mariano Goncalves, Peilin Wu, Adriano Rezende, Weijia Yao
similarity 0.54
Abstract

Guidance vector fields (GVFs) are a popular framework for tasks such as robotic path-following and multi-robot motion coordination, but existing approaches may be non-differentiable or have large derivatives, limiting their use in controllers that require derivatives of the guidance signal, which is common when the GVF is used as an input in a cascaded controller. This paper proposes an infinitely differentiable constructive GVF. The resulting vector field depends on a smoothing parameter and is a generalization of [1], recovering the original GVF in the limit as this parameter approaches zero. It also admits a simple and efficient implementation that preserves smoothness under discretization and can reduce computation time by using substantially fewer curve samples while maintaining small path-following errors. We establish the main theoretical properties and demonstrate its practical advantages through numerical and real-world experiments.

0.23

Flatness-Based Geometric Path Following via Guiding Vector Fields

eess.SY ·2026-10-06 ·J. P. van Gool, H. G. de Marina, B. Jayawardhana, S. Ahmed
similarity 0.52
Abstract

Path following requires an agent to converge to and traverse a geometric path without a prescribed timing law. Guiding vector fields (GVFs) address this directly, but as guidance laws they offer no mechanism to compensate for the agent's own dynamics. Differential flatness-based control (DFBC), on the other hand, compensates for the agent's nonlinear dynamics but relies on a time-parameterized reference trajectory. This letter presents a unified algorithm, which we term flatness-based geometric control (FGC), that generates the DFBC reference hierarchy directly from a GVF and its higher-order time derivatives, eliminating the need for a pre-planned time-parameterized trajectory while retaining full dynamics-informed control. A cascade Lyapunov argument establishes exponential convergence of the tracking error and the physical trajectory to the desired path. The framework is further extended to singularity-free GVFs, which removes the topological obstruction and guarantees the condition for global exponential convergence on closed or self-intersecting paths. The proposed algorithm is validated in simulation.

0.26

Manipulation Feasible Navigation Among Movable Obstacles with Discrete Contact Pushing

cs.RO ·2026-09-20 ·Shaohu Wang, Aiguo Song, Yulong Yuan, Zhongyu Sun, Tianyuan Miao +1 more
code/datahot direction similarity 0.51
Abstract

In environments with large movable obstacles, detour-only navigation can be inefficient or even infeasible, while obstacle interaction requires reasoning about navigation benefit, feasible placement, and executable manipulation. We present a hierarchical navigation among movable obstacles (NAMO) framework for mobile manipulators. At the high level, the planner identifies key blocking obstacles from reference paths and searches for relocation plans that jointly satisfy geometric, manipulation, and downstream navigation constraints. When direct relocation is hindered by other movable objects, a large language model (LLM) is selectively invoked to infer auxiliary manipulation dependencies, which are then verified by deterministic geometric planning. To execute the resulting relocation goals, we define discrete contact modes on the surfaces of box-shaped obstacles and select contact faces and regions online based on position and orientation errors, enabling straight, side, and corner pushing through contact switching. A recurrent reinforcement-learning policy coordinates the mobile base and manipulator to track tool center point (TCP) targets while preserving end-effector reachability during sustained pushing. Simulation and real-robot experiments demonstrate feasible navigation-manipulation in detour, single- and multi-obstacle relocation, and dependency-constrained scenarios, validating the framework for interactive navigation with large non-graspable obstacles. The open-source project is available at https://cloudytosunny.github.io/NAMO_DCPushing/.

0.37

Close&Safe: Maximal Task Preservation for Redundant Manipulators via C-Space Boundary Detour

cs.RO ·2026-11-19 ·Abhigyan Singh, Manthan Goyal, Fares Abu-Dakka, Ravi Prakash
similarity 0.51
Abstract · Submitted to IEEE ICRA 2027

Contact-rich manipulation such as wiping, polishing and surface inspection specifies the task as a continuous end-effector trajectory rather than a goal pose. When an obstacle absent from the planning model intersects it, conventional planners return a collision-free path that may differ from the nominal throughout, discarding trajectory that was never obstructed. We present Close&Safe (Close to the intended task, Safe from obstacles), which decouples tracking from avoidance: the nominal is followed exactly wherever it remains feasible, and avoidance acts only on the interval where it is not, so tracking is hindered as little as the obstacle allows. On that interval we sample the configuration-space obstacle boundary within a corridor around the nominal, connect the samples into a roadmap, and search it for the detour that deviates least before rejoining the nominal at the earliest feasible configuration. We evaluate across diverse simulated obstacle configurations, physical Franka experiments, and ablations of key algorithmic components. The results demonstrate collision-free trajectory repair with localized task modification, while recovering 52.4-78% in simulation and on hardware.

0.26