CS Paper Radar

Course-Referenced Lateral Control of Trail-Following Convoys: String Stability and Adaptive Feedforward under Load Uncertainty

Nitesh Kumar, Sixu Li, Swaroop Darbha

eess.SY cs.RO ·submitted 2026-11-15 23:29 UTC · v1

Abstract

Vehicles in a convoy can steer along the GNSS trails of the vehicles ahead when lane markings are unavailable, as on snow covered roads. Since each vehicle's tracking error enters the reference of the next, lateral errors can grow along the convoy. This paper presents a course referenced formulation of trail following in arc length, in which each follower takes the direction of its fitted trail as its heading reference. Error propagation then reduces to a single transfer function. We derive a condition under which combining the trails of the leader and the predecessor keeps the errors bounded for any convoy length, and show that following the predecessor alone lets the errors accumulate without bound, even without amplification, on roads that end turned or shifted sideways. Passenger and cargo loads and tire stiffness vary in practice, and we show that they enter the curvature feedforward through a single coefficient, whose mismatch leaves steady offsets on curves. We propose an adaptive law that estimates this coefficient on curves and removes the offsets. Simulations of an eleven vehicle convoy confirm the analysis.

Closest papers

Nearest neighbours by meaning across the whole index.

Integrated Longitudinal and Lateral Control for High-Speed Platooning of Articulated Vehicles

cs.RO eess.SY ·2026-10-21 ·Aashish Shaju, Steve Southward, Mehdi Ahmadian
published similarity 0.65
Abstract · Original manuscript of an article published in Vehicle System Dynamics on September 20, 2026. Published version: https://doi.org/10.1080/004…

This paper presents an integrated control framework for high-speed platooning of articulated vehicles, combining advanced longitudinal and lateral control strategies to address the challenges of safe and efficient autonomous driving. A novel proof of string stability for the proposed longitudinal control algorithm, based on a PID framework, ensures robust inter-vehicle distance regulation even under dynamic operating conditions. Additionally, an arc-length-based longitudinal error formulation enhances the applicability of the control system for curved roads, making it realistic for diverse driving scenarios. For lateral control, significant improvements to the clothoid-based path tracking algorithm are introduced to mitigate oscillations and enhance stability at high speeds. These enhancements include a tangential criterion for oscillation reduction, trajectory segment classification for adaptive lookahead distance tuning, a dual-adaptive mechanism for regulating the rate of lookahead distance adjustments based on both cross-track error (CTE) and anticipated road curvature, and extensions for articulated vehicle dynamics. The proposed integrated control framework is validated through simulations, demonstrating its effectiveness in maintaining stability, minimizing tracking errors, and ensuring robust performance in high-speed and challenging platooning scenarios.

0.41

The Flat Earth Error: Differential Geometry in Vehicle Dynamics

eess.SY ·2026-08-25 ·David J. N. Limebeer, Charl van de Merwe
benchmark similarity 0.60
Abstract · 38 pages, 12 figures, 3 tables

The widespread idealization of road surfaces as horizontal planes can introduce significant inaccuracies into vehicle dynamics simulations, a phenomenon termed the ``Flat Earth Error.'' This article provides an expository guide to the use of classical differential geometry to model vehicular motion on curved surfaces. The influence of road curvature is characterized using the metric tensor, the second fundamental form, the shape operator, and the Christoffel symbols. Reproducible MATLAB scripts using an elliptic cone as a benchmark example illustrate the construction of geodesic curves and the simulation of particle dynamics on curved surfaces. The resulting geometric structures are integrated into a single-track vehicle-and-track model within a pseudospectral optimal control framework. Trajectory optimization results over a high-density mobile LiDAR profile of Darlington Raceway are used to generate a high-fidelity road-surface model. This model is used within an hp-adaptive collocation framework to investigate minimum lap time optimal control vehicular trajectories. These computations capture the non-smooth traction saturation limits of the tyres alongside position-dependent variations in gravitational forcing. Integrating differential geometry, multibody mechanics, and optimal control is essential for high-fidelity driven and autonomous vehicle-dynamics simulations. The optimized velocity and tyre slip profiles show that real-world racing track geometries induce dynamically significant three-dimensional effects. These results are particularly relevant to performance-limited simulations on highly banked track surfaces such as NASCAR ovals.

0.19

Safe Platooning under Input Constraints with Link-Wise Velocity String Stability

eess.SY ·2026-10-29 ·Panagiotis S. Trakas, Charalampos P. Bechlioulis, Thomas Berger
theory similarity 0.57
Abstract

We propose a decentralized controller for vehicle platoons with different braking and propulsion limits. The method uses only local distance and velocity measurements and requires neither online optimization nor exact vehicle parameters. The design combines a braking-distance safety margin with an adaptive funnel that relaxes the spacing requirement during propulsion saturation. A standstill mechanism prevents backward motion and supports stop-and-go operation. Under explicit uniform conditions on the vehicle parameters, controller settings, and initial states, we prove that closed-loop solutions exist for all time, collisions are avoided, and input limits are satisfied. Moreover, each follower tracks its predecessor's velocity range with gain one, up to an explicit additive offset determined by the funnel width and the braking-distance term. This bound establishes link-wise velocity string stability. Both the offset and the bounds on speeds and spacing errors are independent of vehicle index and platoon length. Simulations with 2 to 100 followers illustrate safety and bounded velocity deviations under disturbances and actuator limits.

0.18

TerrainForge: Physics-Grounded Road Geometry Editing for Counterfactual Autonomous Driving

cs.CV ·2026-10-02 ·Yang Chen, Yicheng Zhu, zhenning Li, Tao Li, Zilin Bian
similarity 0.55
Abstract

Road geometry (e.g., crests, sags, and speed humps) and surface conditions (e.g., wet or icy pavement) affect how vehicles move, what drivers and onboard cameras observe, and how much clearance remains between vehicles. Editing these properties in a driving scene therefore requires corresponding changes in vehicle motion. Capturing these differences in a driving video requires a road edit to propagate to vehicle motion, camera viewpoint, and the clearance between vehicles. We present TerrainForge, a framework for generating road geometry-focused counterfactuals from reconstructed multi-vehicle driving episodes. A unified road model connects scene deformation with four-wheel vehicle dynamics, allowing crests, sags, speed humps, and friction changes to propagate through vehicle motion, camera viewpoint, and inter-vehicle clearance. Vehicle dynamics are evaluated against CarSim, and prescribed road geometry is verified in reconstructed Waymo scenes. Across 18 episodes, leaving surrounding vehicles on their recorded trajectories instead of recomputing their responses produces median peak differences in predicted ego-lead distance of 1.52 m for crests and 1.41 m for sags. We further simulate the ego response to 15,758 road edits across 983 braking episodes, pairing each edit with its safety outcomes relative to an unedited replay. These pairs train a first-stage screening surrogate that takes the original driving context and candidate road-edit parameters as input and predicts the resulting change in the ego's terminal gap. On held-out scenes, this prediction achieves 22-40% lower mean absolute error than predicting no change, so candidates can be screened cheaply before the full multi-vehicle rollout.

0.20

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.55
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.55
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

eess.SY cs.RO ·2026-11-16 ·Julius Beerwerth, Julius Tischbein, Bassam Alrifaee
code/data similarity 0.53
Abstract · 8 pages, 4 figures. Submitted to the 2027 European Control Conference (ECC). Code and data: https://github.com/bassamlab/multisurface-racing…

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

0.58

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
hot direction similarity 0.52
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.44