CS Paper Radar

Hardware-in-the-Loop Demo of a Cooperative Intersection where Cars don't Stop

Lorenzo Farina, Matteo Piccoli, Salvatore Iandolo, Antonio Solida, Carlo Augusto Grazia, Marco Rapelli, Francesco Raviglione, Claudio Casetti, Alessandro Bazzi

cs.AR ·submitted 2026-10-09 10:01 UTC · v1
published

Abstract

The road transportation sector is undergoing a radical transformation, working for a future where all vehicles will be autonomous and connected. A key challenge in this vision concerns intersections, which will no longer rely on traffic lights or traditional right-of-way rules. Instead, algorithms and communication protocols will be employed to optimize traffic flow. In this context, we are developing a testbed where cars equipped with wireless connectivity exchange information with a remote controller and coordinate their maneuvers. As the vehicles navigate through different types of intersections with various routes, they communicate with the controller, adjusting their speed to pass through intersections without stopping. This demo specifically showcases a hardware-in-the-loop (HiL) implementation of such intelligent intersection, using the SUMO traffic simulator to emulate vehicle positions. Real hardware and software components, which are designed for use in vehicles and roadside infrastructure, are employed to enable real-time data exchange of contextual and control information, running the cooperative coordination algorithm.

Comment
3 pages, 3 figures, accepted at IEEE CSCN 2025
DOI
10.1109/cscn67557.2025.11230601

Closest papers

Nearest neighbours by meaning across the whole index.

Maneuver Coordination Using V2I to Improve Traffic Efficiency at Intersections

cs.NI ·2026-10-09 ·Lorenzo Farina, Marco Rapelli, Barbara Mavì Masini, Claudio Casetti, Alessandro Bazzi
publishedbenchmarkhighly cited similarity 0.68
Abstract · 8 pages, 8 figures, accepted at IEEE VNC 2024

Traffic efficiency and air pollutants are major issues in urban transport systems, as they are critical points for traffic flows and people living in urban areas, respectively. In response to this challenge, connected and autonomous vehicles (CAVs) have garnered increasing attention, with the potential to address the above challenges through cooperative maneuvering and real-time communication. In this paper, we consider an intersection served by a multi-access edge computing (MEC) where CAVs communicate with a controller to pass the intersection without the need of signals and without stopping unless in presence of heavy congestion. For this purpose, we propose a first-in-first-scheduled (FIFS) algorithm, and we specify the communication protocol for its practical implementation. The solution is validated through simulations with varying traffic densities, showing that it provides significant gains in travel time and emissions compared to both uncontrolled intersections, with or without traffic lights, and a benchmark solution derived from the literature.

0.72

How Roadside Units Enhance Intersection Safety? Cooperative Autonomous Driving System Design and A Proof of Concept

eess.SY ·2026-08-10 ·Taoyuan Yu, Kui Wang, Zongdian Li, Tao Yu, Walid Saad +1 more
similarity 0.66
Abstract

Intersections remain one of the most hazardous locations in urban road networks, where heterogeneous traffic participants and limited visibility frequently lead to severe traffic conflicts. In this paper, a vehicle-to-infrastructure-to-vehicle (V2I2V) cooperative system is proposed for improving road safety and traffic efficiency by using digital twins (DTs) deployed on roadside units (RSUs) to eliminate blind spots and centrally coordinate connected and automated vehicles (CAVs) in smart intersections. The proposed system integrates cloud-based global DTs for macroscopic guidance and RSU-based local DTs for real-time operations. Within this architecture, a hierarchical reinforcement learning (HRL) framework combines offline pre-training with online fine-tuning to achieve robust cooperative control. Experimental results show that the proposed system achieves substantial improvements in safety and efficiency in simulation experiments and real-world proof-of-concept (PoC) trials. In simulations, our system ensures high safety, efficiency, and smoothness under realistic communications and traffic constraints. In PoC trials, the RSU-centric control loop achieves a decision-making latency of approximately 42 ms and maintains a safe stopping distance of 8.5 m for pedestrians, while also shortening stop duration and overall traversal time. These results indicate that the proposed system provides robust and scalable performance at smart intersections.

0.04

InterSim: Innovative Intersection Digital Twins for Human-in-the-Loop Driving Simulation

cs.CE cs.CYcs.ET ·2026-11-04 ·Luyang Jiang, Chuheng Wei, Yaguang Li, Shaoqi Wang, Yupeng Zhou +4 more
code/data similarity 0.64
Abstract

Innovative intersection designs can improve roadway safety and operational efficiency, but their uncommon geometries may create challenges for driver comprehension during early deployment. Evaluating these designs through full-scale field implementation can also be costly. This paper presents InterSim, a Unity game engine-based human-in-the-loop (HITL) driving simulator that constructs digital twins of site-specific innovative intersections in a virtual environment. InterSim links the real world and the simulation world through two closed cycles: a digital twin cycle that builds each intersection twin from agency design and traffic data and returns evidence from simulation to the agency, and an HITL cycle in which human drivers or automated driving algorithms operate the ego vehicle under identical scenario conditions. The research capabilities of InterSim are demonstrated through two case studies: a surrogate safety study compares post-encroachment time distributions between a Reduced Conflict Intersection and a standard intersection under different traffic volumes; an eco-driving study compares human drivers with a rule-based agent using vehicle-to-infrastructure information and reveals differences in emission and driving behavior. These studies demonstrate that InterSim provides a reusable digital twin platform for investigating innovative intersection designs from diverse perspectives. Demo video and open-source code can be accessed at https://purduedigitaltwin.github.io/InterSim/

0.27

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.61
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

CARLAverse: A Highly Modular, Distributed, and Multimodal Framework for Human-in-the-Loop Simulation

cs.RO cs.HC ·2026-09-10 ·Patrick Rebling, Philipp Nenninger, Reiner Kriesten
code/data similarity 0.60
Abstract · 19 pages, 13 figures, Code available at https://git.ieem-ka.de/simulator-environments/carlaverse

The development of autonomous driving demands comprehensive testing in mixed-traffic scenarios involving vulnerable road users (VRUs), where purely artificial agents often fail to capture authentic human social negotiations. While human-in-the-loop (HITL) simulators enable safe investigation of these interactions, existing multi-agent platforms struggle with the network latency and synchronization constraints required for high-fidelity haptic feedback. To resolve this, we present CARLAverse, an open-source, multimodal simulation ecosystem. Extending modular hardware abstraction, CARLAverse integrates driving (DrivoCARLA), cycling (CycloCARLA), and pedestrian (WalkoCARLA) simulators into a shared virtual environment. Its core methodological contribution is a distributed physics architecture: latency-critical ego dynamics and high-frequency force feedback are computed locally on client nodes, while a central CARLA server orchestrates non-player character (NPC) physics and global traffic. By decoupling haptic control loops from network bottlenecks, CARLAverse enables scalable, cross-institutional HITL experiments without compromising physical immersion. Code and documentation: https://git.ieem-ka.de/simulator-environments/carlaverse

0.24

A heuristic for optimal coordination of autonomous vehicles: real-time algorithms

eess.SY ·2026-10-27 ·Saugat Shahi, Jonathan Frey, Filippo Fabiani, Moritz Diehl, Mario Zanon
similarity 0.60
Abstract

When coordinating connected and automated vehicles at an unsignalized intersection, the crossing order and the vehicle trajectories must be decided jointly. For a fixed crossing order, the problem can be formulated conveniently in a bi-level form where each vehicle solves its own optimal control problem, whose optimal value is a function of its entry and exit times, and a coordinator optimizes these times subject to precedence constraints. We compute the first and second order sensitivities of lower-level problems, which are required to solve the upper-level problem, by means of algorithmic differentiation using the real-time software package \texttt{acados}. This implementation exploits tailored algorithms to obtain a computationally efficient implementation of the optimal coordination algorithm. We validate our implementation in numerical simulations that demonstrate both real-time feasibility and effectiveness of our algorithm.

0.59

SIREN-Bench: Behavior-Driven Generation and Evaluation of Emergency-Vehicle Interactions

cs.RO ·2026-08-25 ·Yicheng Zhu, Tianmu Zhao, Haoxin Leng, Fan Zuo, Tao Li +1 more
benchmark similarity 0.59
Abstract

Emergency vehicles (EMVs) can reorganize surrounding traffic as civilian vehicles brake, change lanes, or form rescue corridors in response to their passage. Evaluating these safety-critical interactions requires behavior-level control over both EMV privileges and civilian responses, together with consistent sensing and ground truth. Existing datasets and simulation benchmarks do not directly provide this combination. We present \textbf{SIREN}, a behavior-driven SUMO--CARLA co-simulation platform for generating EMV--civilian interactions. SIREN couples SUMO's network-level traffic evolution and behavior logic with CARLA's continuous vehicle control and synchronized onboard sensing; depending on the active behavior, the interaction is controlled by SUMO, CARLA, or jointly. We instantiate the platform as \textbf{SIREN-Bench-v1}, comprising seven parameterized interaction templates across emergency levels L1--L3 and three behavior families, with synchronized sensor observations and simulator-native annotations. We demonstrate the benchmark through three representative tasks: 3D object detection, trajectory prediction, and vision-language risk understanding. Evaluations of nine trajectory predictors, four LiDAR-based detectors, and five vision-language models reveal behavior-dependent failure modes. Traffic-clearance interactions are hardest for detection, privileged intersection traversal is hardest for prediction, and no learned predictor outperforms the constant-velocity reference on average. Vision-language models perform substantially better on normal traffic than on near-miss and collision events. These results demonstrate the value of behavior-centered benchmarking and establish SIREN as an extensible data-generation and evaluation platform for autonomous-driving and transportation safety research.

0.12

Highly Detailed Simulation for Connected Automated Vehicle Cooperative Driving

cs.NI ·2026-09-01 ·Andrei Fizulin, Ilia Dolgov, Andrei Karpukhin
published similarity 0.59
Abstract · 6 pages, 5 figures. Published in the 2026 International Russian Smart Industry Conference (SmartIndustryCon)

End-to-end simulation of connected and automated vehicles requires consistent fidelity across mobility, environment modeling, V2X radio propagation, and decision-making/control modules. However, 2D representations of complex road infrastructure often fail to capture critical signal propagation dynamics, leading to overly optimistic connectivity assumptions. This paper presents a unified workflow within CAVISE that integrates map-based scene preparation with microscopic mobility simulation. The proposed framework incorporates a comparative analysis of trace-driven propagation in 3D versus a simplified 2D baseline, and a modular interface for integrating Autonomous Intersection Management (AIM) models. Collectively, these capabilities enable high-fidelity Cooperative Driving Automation (CDA) experiments. Leveraging ray tracing using Sionna RT at 5.9 GHz with the same radio and solver configuration for both geometry variants, we show that planar reduction in multi-level road infrastructure can remove physically present occlusions and substantially distort signal-loss dynamics. In a bridge overpass case study, the 2D baseline eliminates an occlusion interval observed in 3D, changing the outage behavior from intermittent to consistently connected and yielding an average signal-loss shift on the order of 10 dB. These propagation-induced biases highlight the inability of planar models to capture vertical occlusions, necessitating 3D-aware communication modeling to ensure the validity of cooperative driving automation and intersection control evaluations.

0.43