CS Paper Radar

Highly Detailed Simulation for Connected Automated Vehicle Cooperative Driving

Andrei Fizulin, Ilia Dolgov, Andrei Karpukhin

cs.NI ·submitted 2026-09-01 13:48 UTC · v1
published

Abstract

End-to-end simulation of connected and automated vehicles requires consistent fidelity across mobility, environment modeling, V2X radio propagation, and decision-making/control modules. However, 2D representations of complex road infrastructure often fail to capture critical signal propagation dynamics, leading to overly optimistic connectivity assumptions. This paper presents a unified workflow within CAVISE that integrates map-based scene preparation with microscopic mobility simulation. The proposed framework incorporates a comparative analysis of trace-driven propagation in 3D versus a simplified 2D baseline, and a modular interface for integrating Autonomous Intersection Management (AIM) models. Collectively, these capabilities enable high-fidelity Cooperative Driving Automation (CDA) experiments. Leveraging ray tracing using Sionna RT at 5.9 GHz with the same radio and solver configuration for both geometry variants, we show that planar reduction in multi-level road infrastructure can remove physically present occlusions and substantially distort signal-loss dynamics. In a bridge overpass case study, the 2D baseline eliminates an occlusion interval observed in 3D, changing the outage behavior from intermittent to consistently connected and yielding an average signal-loss shift on the order of 10 dB. These propagation-induced biases highlight the inability of planar models to capture vertical occlusions, necessitating 3D-aware communication modeling to ensure the validity of cooperative driving automation and intersection control evaluations.

Comment
6 pages, 5 figures. Published in the 2026 International Russian Smart Industry Conference (SmartIndustryCon)
Journal ref
2026 International Russian Smart Industry Conference (SmartIndustryCon), 2026
DOI
10.1109/SmartIndustryCon68821.2026.11493031

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling Diffuse Scattering in Mobility Scenarios: Ray Tracing Model and Measurement Validation

eess.SP ·2026-10-14 ·Milica Djordjevic, Thomas Wilding, Anja Dakić, Benjamin Rainer, Markus Hofer +1 more
code/data similarity 0.61
Abstract · Submitted to EuCAP 2027

Open-source ray tracing (RT) frameworks are increasingly used for site-specific channel modeling due to their reproducibility and extensibility. In non-stationary mobility scenarios, repeated RT evaluations can generate different diffuse propagation paths without preserving their correspondence, limiting a consistent representation of their temporal evolution. To address this limitation, we extend diffuse scattering modeling in Sionna RT using persistent surface-associated scattering points. Their positions remain fixed, while their contributions evolve according to changes in the propagation geometry and visibility. The proposed approach is validated using empirical radio channel impulse response measurements in an urban vehicular scenario at 5.9 GHz. Compared with the standard Sionna RT baseline, the proposed model shows improved agreement with measurements in the delay and Doppler domains.

0.28

Hardware-in-the-Loop Demo of a Cooperative Intersection where Cars don't Stop

cs.AR ·2026-10-09 ·Lorenzo Farina, Matteo Piccoli, Salvatore Iandolo, Antonio Solida, Carlo Augusto Grazia +4 more
published similarity 0.59
Abstract · 3 pages, 3 figures, accepted at IEEE CSCN 2025

The road transportation sector is undergoing a radical transformation, working for a future where all vehicles will be autonomous and connected. A key challenge in this vision concerns intersections, which will no longer rely on traffic lights or traditional right-of-way rules. Instead, algorithms and communication protocols will be employed to optimize traffic flow. In this context, we are developing a testbed where cars equipped with wireless connectivity exchange information with a remote controller and coordinate their maneuvers. As the vehicles navigate through different types of intersections with various routes, they communicate with the controller, adjusting their speed to pass through intersections without stopping. This demo specifically showcases a hardware-in-the-loop (HiL) implementation of such intelligent intersection, using the SUMO traffic simulator to emulate vehicle positions. Real hardware and software components, which are designed for use in vehicles and roadside infrastructure, are employed to enable real-time data exchange of contextual and control information, running the cooperative coordination algorithm.

0.36

VIPS: Vehicle-Infrastructure Cooperative Planning Benchmark via Pseudo-Simulation

cs.CV ·2026-09-02 ·Hoonhee Cho, Jae-Young Kang, Giwon Lee, Hyemin Yang, Heejun Park +1 more
top venuebenchmarkcode/data similarity 0.59
Abstract · Accepted by ECCV 2026 Spotlight

End-to-end autonomous driving in urban environments requires robust decision-making under partial observability and complex multi-agent interactions. Severe occlusions and dense traffic at intersections limit the perception capability of single-agent systems, motivating recent efforts on Vehicle-to-Infrastructure (V2I) cooperation for perception and planning. However, existing evaluation protocols face a fundamental trade-off: open-loop evaluation fails to capture error accumulation and recovery from deviations, while closed-loop evaluation is costly, difficult to scale, and often relies on simulated environments that may suffer from domain gaps. To bridge this gap, we propose VIPS, a benchmark for cooperative autonomous driving in V2I settings based on pseudo-simulation. VIPS extends pseudo-simulation by integrating vehicle and infrastructure observations. This enables scalable yet realistic evaluation of robustness and error propagation without full simulation. We further present CoS-V2X, a cooperative planning framework based on sparse representations. CoS-V2X models vehicle-infrastructure interactions using compact features for efficient communication and robust decision-making under heterogeneous observations. Code and dataset are available at https://vips2026.github.io.

0.66

Maneuver Coordination Using V2I to Improve Traffic Efficiency at Intersections

cs.NI ·2026-10-09 ·Lorenzo Farina, Marco Rapelli, Barbara Mavì Masini, Claudio Casetti, Alessandro Bazzi
publishedbenchmarkhighly cited similarity 0.58
Abstract · 8 pages, 8 figures, accepted at IEEE VNC 2024

Traffic efficiency and air pollutants are major issues in urban transport systems, as they are critical points for traffic flows and people living in urban areas, respectively. In response to this challenge, connected and autonomous vehicles (CAVs) have garnered increasing attention, with the potential to address the above challenges through cooperative maneuvering and real-time communication. In this paper, we consider an intersection served by a multi-access edge computing (MEC) where CAVs communicate with a controller to pass the intersection without the need of signals and without stopping unless in presence of heavy congestion. For this purpose, we propose a first-in-first-scheduled (FIFS) algorithm, and we specify the communication protocol for its practical implementation. The solution is validated through simulations with varying traffic densities, showing that it provides significant gains in travel time and emissions compared to both uncontrolled intersections, with or without traffic lights, and a benchmark solution derived from the literature.

0.72

V2X-WAM: A Cooperative World Action Model for End-to-End Autonomous Driving

cs.RO cs.CV ·2026-09-29 ·Junwei You, Weizhe Tang, Can Wang, Yan Zhao, Jun Hua +4 more
similarity 0.58
Abstract

Vehicle-infrastructure cooperation can complement onboard sensing with broader and more informative observations of the traffic environment, providing valuable support for end-to-end autonomous driving. However, existing cooperative driving methods mainly exploit roadside information to enhance the representation of the current scene, while the future consequences of prospective driving actions are rarely modeled explicitly. This limits the ability of the planner to anticipate how its decisions may interact with the evolving traffic environment. To address this issue, we propose V2X-WAM, a cooperative world action model that tightly couples cooperative scene understanding, action generation, and future-world reasoning. V2X-WAM constructs a reliability-aware spatiotemporal representation from vehicle- and infrastructure-side observations, while compressing infrastructure information into a compact quantized message for efficient communication. Based on the resulting cooperative representation, a multimodal planner generates prospective trajectories, which explicitly condition future occupancy and dynamic-flow prediction. The predicted world consequences are then fed back to refine the planned trajectory, forming a closed interaction between action and future-world evolution. Experiments on a large-scale real-world cooperative driving dataset demonstrate that V2X-WAM consistently improves planning accuracy and safety over representative end-to-end cooperative driving methods, while achieving stronger future-world prediction and substantially lower communication overhead. Ablation studies further validate the effectiveness of the proposed design.

0.19

Ego2Flow: Benchmarking the Traffic-System Impact of Autonomous Driving on Maps Distilled from Real-World Roads

cs.RO cs.CV ·2026-11-13 ·Yu Dong, Weiying Shen, Hangyu Li, Shu Han, Hong Li +6 more
benchmarkcode/data similarity 0.57
Abstract

End-to-end autonomous driving is predominantly evaluated through ego-vehicle safety and task completion. Its deployment in urban traffic, however, creates sustained interactions among vehicles whose collective effects remain insufficiently evaluated. We introduce Ego2Flow, a closed-loop benchmark for assessing the traffic-system impact of autonomous driving on maps distilled from real-world cities. To construct realistic 3D urban environments for sustained closed-loop traffic simulation, we develop an agent-guided map distillation framework that integrates real-world maps and observations with complementary geographic information. Through an iterative feedback mechanism and a traffic information graph that jointly guide scene generation, the framework preserves lane topology, critical road geometry and decision-relevant visual conditions while simplifying nonessential details and completing unobserved regions. Using our proposed framework, we generate and publicly release six CARLA maps from the Argoverse 2 dataset, covering the corresponding real-world regions and enabling paired comparisons of driving behavior under real and simulated observations. On these maps, Ego2Flow evaluates how autonomous driving policies affect traffic efficiency, safety, stability and energy consumption across diverse road structures. Compared with existing construction methods, our framework achieves the lowest average displacement error between planning outputs from paired real and simulated observations. We further benchmark representative driving policies to characterize their system-level impact on urban traffic. Project Page: https://github.com/Fisher-007/Ego2Flow.

0.28

How Roadside Units Enhance Intersection Safety? Cooperative Autonomous Driving System Design and A Proof of Concept

eess.SY ·2026-08-10 ·Taoyuan Yu, Kui Wang, Zongdian Li, Tao Yu, Walid Saad +1 more
similarity 0.57
Abstract

Intersections remain one of the most hazardous locations in urban road networks, where heterogeneous traffic participants and limited visibility frequently lead to severe traffic conflicts. In this paper, a vehicle-to-infrastructure-to-vehicle (V2I2V) cooperative system is proposed for improving road safety and traffic efficiency by using digital twins (DTs) deployed on roadside units (RSUs) to eliminate blind spots and centrally coordinate connected and automated vehicles (CAVs) in smart intersections. The proposed system integrates cloud-based global DTs for macroscopic guidance and RSU-based local DTs for real-time operations. Within this architecture, a hierarchical reinforcement learning (HRL) framework combines offline pre-training with online fine-tuning to achieve robust cooperative control. Experimental results show that the proposed system achieves substantial improvements in safety and efficiency in simulation experiments and real-world proof-of-concept (PoC) trials. In simulations, our system ensures high safety, efficiency, and smoothness under realistic communications and traffic constraints. In PoC trials, the RSU-centric control loop achieves a decision-making latency of approximately 42 ms and maintains a safe stopping distance of 8.5 m for pedestrians, while also shortening stop duration and overall traversal time. These results indicate that the proposed system provides robust and scalable performance at smart intersections.

0.04

MIXSim: A multiclass first order traffic model with composition-dependent dynamics for mixed-autonomy urban networks

eess.SY math-ph ·2026-10-16 ·Muhammad Haris, Claudio Roncoli
similarity 0.57
Abstract

This paper presents a novel multiclass first order macroscopic traffic model for mixed-autonomy in signalized urban networks, called MIXSim. Human driven vehicles (HDVs) and Connected and Automated Vehicles (CAVs) are represented as separate classes while origin-destination information is retained through commodity specific states. The local vehicle class composition and class specific driving behaviour characteristics determine the parameters of a composition-dependent triangular fundamental diagram. At signalized intersections, the composition of movement demand additionally determines the saturation flow rate, while the realized movement flow is constrained by demand, effective green time, and downstream receiving capacity. Numerical experiments investigate different CAV penetration levels and CAV time gaps, together with alternative signal control strategies. The numerical experiments illustrate how changes in CAV penetration and CAV time gap affect network performance under the tested conditions, and demonstrate the use of MIXSim for comparing signal control strategies across different mixed traffic regimes.

0.21