CS Paper Radar

MIXSim: A multiclass first order traffic model with composition-dependent dynamics for mixed-autonomy urban networks

Muhammad Haris, Claudio Roncoli

eess.SY math-ph ·submitted 2026-10-16 16:35 UTC · v1

Abstract

This paper presents a novel multiclass first order macroscopic traffic model for mixed-autonomy in signalized urban networks, called MIXSim. Human driven vehicles (HDVs) and Connected and Automated Vehicles (CAVs) are represented as separate classes while origin-destination information is retained through commodity specific states. The local vehicle class composition and class specific driving behaviour characteristics determine the parameters of a composition-dependent triangular fundamental diagram. At signalized intersections, the composition of movement demand additionally determines the saturation flow rate, while the realized movement flow is constrained by demand, effective green time, and downstream receiving capacity. Numerical experiments investigate different CAV penetration levels and CAV time gaps, together with alternative signal control strategies. The numerical experiments illustrate how changes in CAV penetration and CAV time gap affect network performance under the tested conditions, and demonstrate the use of MIXSim for comparing signal control strategies across different mixed traffic regimes.

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamic Traffic Modeling using Equivalent Circuit Models

eess.SY ·2026-11-06 ·Joseph Moyalan, Ricardo de Castro, Iman Ebrahimi, Xuchang Tang, Xinfan Lin
similarity 0.63
Abstract

This paper presents an equivalent circuit model (ECM) for dynamic traffic modeling by exploiting analogies between electrical and transportation variables. Vehicle concentration is represented by capacitor voltage, while traffic flow is modeled using controllable current sources. The proposed formulation is shown to preserve the conservation and sending/receiving relationships of the spatially discretized Lighthill Whitham Richards traffic model. The framework is extended to restricted inflow, traffic signals, and two road merging and diverging scenarios. Validation against microscopic Simulation of Urban MObility (SUMO) simulations, involving traffic signals, two-road merging, and single-road diverging scenarios, demonstrates that the proposed ECM successfully reproduces the principal macroscopic traffic dynamics, including queue formation, backward congestion propagation, vehicle accumulation, saturation, and subsequent traffic recovery.

0.24

Maneuver Coordination Using V2I to Improve Traffic Efficiency at Intersections

cs.NI ·2026-10-09 ·Lorenzo Farina, Marco Rapelli, Barbara Mavì Masini, Claudio Casetti, Alessandro Bazzi
publishedbenchmarkhighly cited similarity 0.61
Abstract · 8 pages, 8 figures, accepted at IEEE VNC 2024

Traffic efficiency and air pollutants are major issues in urban transport systems, as they are critical points for traffic flows and people living in urban areas, respectively. In response to this challenge, connected and autonomous vehicles (CAVs) have garnered increasing attention, with the potential to address the above challenges through cooperative maneuvering and real-time communication. In this paper, we consider an intersection served by a multi-access edge computing (MEC) where CAVs communicate with a controller to pass the intersection without the need of signals and without stopping unless in presence of heavy congestion. For this purpose, we propose a first-in-first-scheduled (FIFS) algorithm, and we specify the communication protocol for its practical implementation. The solution is validated through simulations with varying traffic densities, showing that it provides significant gains in travel time and emissions compared to both uncontrolled intersections, with or without traffic lights, and a benchmark solution derived from the literature.

0.72

Stability-Preserving Reinforcement Learning for Heterogeneity-Aware Composite Max-Pressure Traffic Signal Control

eess.SY ·2026-10-22 ·Jichen Zhu, Chaopeng Tan
similarity 0.61
Abstract

Reinforcement learning (RL) provides a flexible mechanism for adapting traffic signal control to heterogeneous traffic and sensing conditions, but directly learned signal actions do not automatically inherit the analytical properties of structured traffic-control methods. This paper proposes Com-MP, a theory-guided RL framework that learns a context-dependent composition of multiple max-pressure (MP) control preferences while retaining decentralized MP phase selection. The learned policy adapts the relative influence of constituent MP formulations according to local traffic and sensing conditions, allowing data-driven adaptation to operate within a structured traffic-control framework. We show that such intersection-specific and time-varying composition preserves strong queue stability for every demand in the strictly stabilizable region under any admissible non-anticipative composition policy, thereby separating the performance-adaptation role of learning from the stability property of the underlying controller. In a representative implementation combining detector-supported queue-based MP and connected-vehicle-supported travel-time MP, experiments on a real-world 45-intersection network show that Com-MP reduces average delay by 15.6\% and 8.6\% relative to the two constituent controllers, respectively, and by about 7.0\% relative to the best fixed composition. The learned composition responds systematically to local traffic and sensing conditions, remains effective under heterogeneous and degraded sensing, and can be transferred without retraining to an unseen network with an average delay only 2.4\% higher than that of a policy trained directly on the target network. These results show how learning-based adaptation can be introduced within a stability-preserving traffic-control structure, providing a theory-guided pathway toward trustworthy learning-enabled traffic signal control.

0.46

A Review of Max-Pressure Traffic Signal Control Algorithms: State of the Art and Research Opportunities

eess.SY math.OC ·2026-11-02 ·Abdullah Al Asif, Chaopeng Tan, Vikash V. Gayah, Hao Liu
survey similarity 0.60
Abstract · 49 pages, 7 figures

Max-Pressure (MP) has emerged as a widely studied decentralized traffic signal control framework, thanks to its desirable theoretical properties and strong control performance. Early research on MP focused on improving control performance by exploring different variables of the traffic state for the definition of pressure. Subsequent studies expanded MP to incorporate the complexity of real-world transportation systems and emerging technologies. This paper provides a comprehensive review of these developments. The review first introduces the theoretical foundations of MP and examines early developments in movement weight definition. It then synthesizes major extensions for multimodal and multiscale network control, followed by recent developments in connected and automated vehicle (CAV) environments and the integration of MP with artificial intelligence (AI) and data-driven methods. Beyond summarizing existing approaches, this review examines their underlying assumptions, data requirements, implementation considerations, and practical limitations. Based on this comprehensive review, key research gaps and future directions are identified, including remaining limitations in the theoretical foundations of MP and the underexplored integration of autonomous vehicle control with the MP framework. Overall, this review provides a structured perspective on the evolution and current state of MP control and highlights opportunities for developing more proactive, robust, and practically deployable MP-based traffic control methods.

0.27

Towards Mode-Balanced Intersection Control: Hierarchical Coordination of Signal Timings, AV Trajectories, and Cyclist Speed Advice

eess.SY ·2026-11-10 ·Wies Siffels, Giray Önür, Azita Dabiri
similarity 0.59
Abstract

Connected and automated vehicles (AVs) enable traffic signals and vehicle trajectories to be optimised jointly, but existing co-optimisation frameworks overlook cyclists, even though they share the same intersections. We propose a hierarchical framework that optimises traffic signal timings, AV trajectories, and cyclist speed advice to reduce travel times for both motorised vehicles and cyclists. The upper level jointly optimises signal timings and cyclist speed advice, while the lower level optimises AV trajectories and also updates cyclist speed advice obtained from the higher level at a higher frequency based on the resulting signal plan. The framework is evaluated in simulation under multiple demand profiles and optimisation parameter settings. Compared with optimized vehicle trajectories with fixed-time signal control, the proposed framework reduces mean travel times by 13.6\% for AVs and 12.3\% for cyclists. Adding cyclist speed advice further reduces mean cyclist waiting time by about 80\% relative to the same framework without speed advice. These results demonstrate substantial benefits for both modes of transport.

0.34

Agent-Based Evolutionary Dynamics for Mixed Autonomy Weaving Ramps

cs.MA ·2026-09-29 ·Sheryl Paul, Kexin Wang, Ruolin Li, Jyotirmoy V. Deshmukh
theory similarity 0.59
Abstract · 6 pages, 9 figures. Accepted for publication at the 6th IFAC Workshop on Cyber-Physical Human Systems (CPHS 2026), December 11-12, 2026, Red…

Existing models of mixed-autonomy weaving ramps characterize how altruistic connected and automated vehicles (CAVs) can improve traffic efficiency at the population level, but provide limited insight into how such behavior emerges from decentralized vehicle interactions or how it is affected by finite populations, heterogeneous preferences, and imperfect information. We develop an agent-based model of a macroscopic weaving-ramp framework in which individual vehicles adapt their lane choices using an evolutionary game-theoretic update rule and altruism-based objectives providing a microscopic interpretation of the original Wardrop model. We prove convergence of the decentralized dynamics to the unique equilibrium predicted by the macroscopic theory. Beyond reproducing aggregate equilibrium behavior, the framework enables the study of deployment-level questions that cannot be addressed by static analysis. Simulation results demonstrate close agreement with the macroscopic predictions while revealing how convergence rates, adaptation to changing traffic conditions, heterogeneous altruism levels among CAVs, and imperfect state information influence system performance and the distribution of altruistic burden across vehicles. These results provide a bridge between equilibrium traffic theory and decentralized mixed-autonomy deployment.

0.42

Highly Detailed Simulation for Connected Automated Vehicle Cooperative Driving

cs.NI ·2026-09-01 ·Andrei Fizulin, Ilia Dolgov, Andrei Karpukhin
published similarity 0.57
Abstract · 6 pages, 5 figures. Published in the 2026 International Russian Smart Industry Conference (SmartIndustryCon)

End-to-end simulation of connected and automated vehicles requires consistent fidelity across mobility, environment modeling, V2X radio propagation, and decision-making/control modules. However, 2D representations of complex road infrastructure often fail to capture critical signal propagation dynamics, leading to overly optimistic connectivity assumptions. This paper presents a unified workflow within CAVISE that integrates map-based scene preparation with microscopic mobility simulation. The proposed framework incorporates a comparative analysis of trace-driven propagation in 3D versus a simplified 2D baseline, and a modular interface for integrating Autonomous Intersection Management (AIM) models. Collectively, these capabilities enable high-fidelity Cooperative Driving Automation (CDA) experiments. Leveraging ray tracing using Sionna RT at 5.9 GHz with the same radio and solver configuration for both geometry variants, we show that planar reduction in multi-level road infrastructure can remove physically present occlusions and substantially distort signal-loss dynamics. In a bridge overpass case study, the 2D baseline eliminates an occlusion interval observed in 3D, changing the outage behavior from intermittent to consistently connected and yielding an average signal-loss shift on the order of 10 dB. These propagation-induced biases highlight the inability of planar models to capture vertical occlusions, necessitating 3D-aware communication modeling to ensure the validity of cooperative driving automation and intersection control evaluations.

0.43

Stabilizing Traffic Flow Via Autonomous Vehicles: A Less Conservative Approach

eess.SY ·2026-09-08 ·MirSaleh Bahavarnia, Ahmad F. Taha
publishedtheory similarity 0.57
Abstract

This paper explores stabilizing traffic flow using a minimum number of autonomous vehicles (AVs) under control constraints. In contrast to most studies, we consider a heterogeneous parameter setup scenario for human-driven vehicles (HVs) to reflect real-world differences in driving behavior. While current literature uses an H-Infinity based sufficient condition to ensure the string stability of traffic flow, this often yields a conservative lower bound on the AV penetration rate to stabilize traffic flow. To reduce such conservativeness and obtain a less conservative lower bound, we ensure the string stability of traffic flow by directly imposing the possession of no growing eigenmodes. We also systematically find a minimum number of required AVs and solve for the optimal control parameters via nonlinear optimization. We finally assess the intended conservativeness reduction via numerical simulations. Quantitatively, applying our algorithm to the homogeneous HV baseline in the literature (the result built upon an H-Infinity based sufficient condition) reduces (improves) the AV penetration rate by 17.14% while ensuring the string stability of traffic flow. We observe a trade-off between the stabilization/performance degradation and the number of utilized identical AVs. Quantitatively, our last numerical simulation corroborates that the AV penetration rate can be reduced by 61.54% at the expense of 27.66% higher position difference deviation from the equilibrium and a 92.47% degradation in the real stability radius (RSR)---a metric to measure the stability robustness under the perturbation/uncertainty---associated with the aggregated linearized dynamics while ensuring the string stability of traffic flow. This trade-off helps engineers/operators make better traffic control decisions.

0.31