CS Paper Radar

Towards Mode-Balanced Intersection Control: Hierarchical Coordination of Signal Timings, AV Trajectories, and Cyclist Speed Advice

Wies Siffels, Giray Önür, Azita Dabiri

eess.SY ·submitted 2026-11-10 10:38 UTC · v1

Abstract

Connected and automated vehicles (AVs) enable traffic signals and vehicle trajectories to be optimised jointly, but existing co-optimisation frameworks overlook cyclists, even though they share the same intersections. We propose a hierarchical framework that optimises traffic signal timings, AV trajectories, and cyclist speed advice to reduce travel times for both motorised vehicles and cyclists. The upper level jointly optimises signal timings and cyclist speed advice, while the lower level optimises AV trajectories and also updates cyclist speed advice obtained from the higher level at a higher frequency based on the resulting signal plan. The framework is evaluated in simulation under multiple demand profiles and optimisation parameter settings. Compared with optimized vehicle trajectories with fixed-time signal control, the proposed framework reduces mean travel times by 13.6\% for AVs and 12.3\% for cyclists. Adding cyclist speed advice further reduces mean cyclist waiting time by about 80\% relative to the same framework without speed advice. These results demonstrate substantial benefits for both modes of transport.

Closest papers

Nearest neighbours by meaning across the whole index.

Slower but Faster: When Self-Organized Traffic Flows Beat Traffic Signal Control

eess.SY ·2026-11-16 ·Damian Dailisan, Meisam Akbarzadeh, Dirk Helbing
similarity 0.60
Abstract · submitted to IEEE T-ITS

Urban traffic flow networks are complex adaptive systems, whose variability challenges centralized, top-down control. We study decentralized alternatives in which order emerges from local interactions, comparing the network-wide performance of roundabouts in SUMO against fixed-time and actuated control as well as self-organizing signals on a 4$\times$4 grid and a rewired, irregular variant of it, across demand levels and periodic surge amplitudes. In our computer simulations of the regular grid, converting the single most central intersection already lowers delays by 2 to 3\% relative to actuated control; each additional conversion lowers them further, and full conversion outperforms every signalized alternative under all conditions studied. In the irregular traffic flow network with full conversion of all intersections into roundabouts, this holds only up to a critical load, where traffic flow breaks down sharply, when the time-averaged demand reaches about 3.1 times the base load. Beyond that point, the self-organizing traffic signals show the lowest delay of any network-wide strategy and is nearly insensitive to surges. Interestingly, roundabouts are favorable solutions even at lower speed limits: in the regular grid, compared to the mean speed under actuated control at a speed limit of 50\,km/h, roundabouts match that speed at a speed limit of about 40\,km/h. Compared to traffic signal control, this establishes a slower-is-faster effect. Furthermore, travel times in self-organized traffic flows are more predictable than in networks with conventional signals.

0.32

MIXSim: A multiclass first order traffic model with composition-dependent dynamics for mixed-autonomy urban networks

eess.SY math-ph ·2026-10-16 ·Muhammad Haris, Claudio Roncoli
similarity 0.59
Abstract

This paper presents a novel multiclass first order macroscopic traffic model for mixed-autonomy in signalized urban networks, called MIXSim. Human driven vehicles (HDVs) and Connected and Automated Vehicles (CAVs) are represented as separate classes while origin-destination information is retained through commodity specific states. The local vehicle class composition and class specific driving behaviour characteristics determine the parameters of a composition-dependent triangular fundamental diagram. At signalized intersections, the composition of movement demand additionally determines the saturation flow rate, while the realized movement flow is constrained by demand, effective green time, and downstream receiving capacity. Numerical experiments investigate different CAV penetration levels and CAV time gaps, together with alternative signal control strategies. The numerical experiments illustrate how changes in CAV penetration and CAV time gap affect network performance under the tested conditions, and demonstrate the use of MIXSim for comparing signal control strategies across different mixed traffic regimes.

0.21

Timing Sensitivity in Actuated Traffic Signal Control: A simulation study on one urban network

eess.SY ·2026-09-29 ·Nitai Aharoni
code/data similarity 0.59
Abstract · 13 pages, 1 figure, 12 tables. Code, network and experiment configurations at https://github.com/nitaiaharoni1/traffic-simulator

A comparison between adaptive and fixed-time traffic signals can change when only their timing settings change. We examine this sensitivity in 240 simulation runs on one OpenStreetMap-derived urban network, using eight configurations, three arrival rates and ten paired demand seeds. The experiment varies the maximum green of presence-based actuation, retimes the fixed baseline, and includes a discharge-based phase-termination rule. The endpoint is finite-window time spent per offered trip, including entry waiting and penalties for removed or abandoned trips. At the highest tested load, actuation with a maximum green of twice the planned split has a mean endpoint 57.4 per cent above the original fixed plan. Reducing that multiplier to 1.25 puts it 70.7 per cent below the same plan. Against the best of three tested fixed plans, discharge-based termination reduces the mean endpoint by 14.8, 15.8 and 18.3 per cent across the three loads. Both timing sweeps favour their shortest tested setting, so neither identifies an optimum. This exploratory study uses synthetic demand, negligible start-up lost time and physical removal of persistently stationary vehicles. The results support testing timing sensitivity before attributing performance to a controller family; they do not establish a setting for real-world deployment.

0.41

Maneuver Coordination Using V2I to Improve Traffic Efficiency at Intersections

cs.NI ·2026-10-09 ·Lorenzo Farina, Marco Rapelli, Barbara Mavì Masini, Claudio Casetti, Alessandro Bazzi
publishedbenchmarkhighly cited similarity 0.59
Abstract · 8 pages, 8 figures, accepted at IEEE VNC 2024

Traffic efficiency and air pollutants are major issues in urban transport systems, as they are critical points for traffic flows and people living in urban areas, respectively. In response to this challenge, connected and autonomous vehicles (CAVs) have garnered increasing attention, with the potential to address the above challenges through cooperative maneuvering and real-time communication. In this paper, we consider an intersection served by a multi-access edge computing (MEC) where CAVs communicate with a controller to pass the intersection without the need of signals and without stopping unless in presence of heavy congestion. For this purpose, we propose a first-in-first-scheduled (FIFS) algorithm, and we specify the communication protocol for its practical implementation. The solution is validated through simulations with varying traffic densities, showing that it provides significant gains in travel time and emissions compared to both uncontrolled intersections, with or without traffic lights, and a benchmark solution derived from the literature.

0.72

Hardware-in-the-Loop Demo of a Cooperative Intersection where Cars don't Stop

cs.AR ·2026-10-09 ·Lorenzo Farina, Matteo Piccoli, Salvatore Iandolo, Antonio Solida, Carlo Augusto Grazia +4 more
published similarity 0.58
Abstract · 3 pages, 3 figures, accepted at IEEE CSCN 2025

The road transportation sector is undergoing a radical transformation, working for a future where all vehicles will be autonomous and connected. A key challenge in this vision concerns intersections, which will no longer rely on traffic lights or traditional right-of-way rules. Instead, algorithms and communication protocols will be employed to optimize traffic flow. In this context, we are developing a testbed where cars equipped with wireless connectivity exchange information with a remote controller and coordinate their maneuvers. As the vehicles navigate through different types of intersections with various routes, they communicate with the controller, adjusting their speed to pass through intersections without stopping. This demo specifically showcases a hardware-in-the-loop (HiL) implementation of such intelligent intersection, using the SUMO traffic simulator to emulate vehicle positions. Real hardware and software components, which are designed for use in vehicles and roadside infrastructure, are employed to enable real-time data exchange of contextual and control information, running the cooperative coordination algorithm.

0.36

Integrating Traffic Noise Emission Modelling into Variable Speed Limit Control

cs.RO ·2026-09-01 ·Jiawen Meng, John Pravin Arockiasamy, Alexey Vinel
published similarity 0.57
Abstract · Accepted for publication at the IEEE Intelligent Transportation Systems Conference (ITSC), 2026

Road traffic noise remains a major environmental challenge, yet most speed management strategies are static and do not respond to short-term variations in traffic noise emissions. Although variable speed limit (VSL) systems are widely deployed for safety and congestion mitigation, traffic noise is rarely treated as an explicit operational control objective. This paper proposes a noise-aware VSL framework that integrates aggregated traffic-state estimation with a simplified CNOSSOS-EU-based emission indicator. A stage-based controller with time-varying reference thresholds dynamically adjusts discrete speed-limit levels in response to estimated emission conditions. The framework is evaluated using microscopic traffic simulation calibrated with empirical motorway data and replicated across multiple stochastic realisations. Over a 24-hour evaluation period, the adaptive strategy reduces the receiver-based equivalent sound level by 2.9 dB(A) relative to unrestricted traffic conditions, while maintaining an average vehicle speed approximately 11.3 km/h higher than a permanently imposed low-speed regime. Period-wise analysis shows that speed reductions are activated selectively when emission levels approach calibrated targets, rather than enforcing a constant intermediate limit. Traffic stability indicators reveal moderate increases in speed variability compared with unrestricted operation, but substantially lower braking intensity than under uniform low-speed enforcement. These results demonstrate the feasibility of integrating environmental performance indicators into operational speed control, providing a practical complement to conventional infrastructure-based noise mitigation measures.

0.27

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.57
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

Energy- and Time-Efficient Multi-Vehicle Trajectory Planning Using Augmented DAG Search in Configuration Space

eess.SY ·2026-11-10 ·Amirreza Akbari, Galina Sidorenko, Johan Thunberg
similarity 0.57
Abstract · This manuscript is currently under review at IEEE Transactions on Intelligent Transportation Systems

Multi-vehicle trajectory planning for CAV requires balancing energy consumption and travel time while ensuring safety and scalability. While travel-time-optimal methods based on Integer Programming exhibit poor scalability in large-scale multi-vehicle scenarios, existing energy-oriented approaches fail to balance energy consumption and travel time. We extend a configuration-space framework for multi-vehicle trajectory planning to jointly locally optimize travel time and energy consumption. A weighted energy-travel time objective is combined with an efficient augmented DAG search on two-dimensional decompositions of a high-dimensional configuration space, enabling scalable and collision-free coordination of large numbers of vehicles. Although the proposed framework is applicable to other traffic scenarios, such as roundabouts and vehicle-following, we focus on intersections as a representative and challenging planning problem. To further improve performance for our methodology, we also extend the method with an insertion-ordering heuristic that exploits reduced-space geometric information. Combined with nonlinear model predictive control, the proposed framework is shown to scale to 40 vehicles, outperform MILP-based and convex optimization baselines in dense intersections, and reduce energy consumption at equalized travel times relative to time-optimal planning.

0.23