CS Paper Radar

Integrating Traffic Noise Emission Modelling into Variable Speed Limit Control

Jiawen Meng, John Pravin Arockiasamy, Alexey Vinel

cs.RO ·submitted 2026-09-01 14:50 UTC · v1
published

Abstract

Road traffic noise remains a major environmental challenge, yet most speed management strategies are static and do not respond to short-term variations in traffic noise emissions. Although variable speed limit (VSL) systems are widely deployed for safety and congestion mitigation, traffic noise is rarely treated as an explicit operational control objective. This paper proposes a noise-aware VSL framework that integrates aggregated traffic-state estimation with a simplified CNOSSOS-EU-based emission indicator. A stage-based controller with time-varying reference thresholds dynamically adjusts discrete speed-limit levels in response to estimated emission conditions. The framework is evaluated using microscopic traffic simulation calibrated with empirical motorway data and replicated across multiple stochastic realisations. Over a 24-hour evaluation period, the adaptive strategy reduces the receiver-based equivalent sound level by 2.9 dB(A) relative to unrestricted traffic conditions, while maintaining an average vehicle speed approximately 11.3 km/h higher than a permanently imposed low-speed regime. Period-wise analysis shows that speed reductions are activated selectively when emission levels approach calibrated targets, rather than enforcing a constant intermediate limit. Traffic stability indicators reveal moderate increases in speed variability compared with unrestricted operation, but substantially lower braking intensity than under uniform low-speed enforcement. These results demonstrate the feasibility of integrating environmental performance indicators into operational speed control, providing a practical complement to conventional infrastructure-based noise mitigation measures.

Comment
Accepted for publication at the IEEE Intelligent Transportation Systems Conference (ITSC), 2026

Closest papers

Nearest neighbours by meaning across the whole index.

On the Input Sensitivity of METANET Models and the Robustness of Dynamic Calibration

eess.SY ·2026-09-30 ·Cameron Hickert, Shreyaa Raghavan, Cathy Wu
published similarity 0.62
Abstract · Accepted at the 65th IEEE Conference on Decision and Control. C. Hickert and S. Raghavan contributed equally to this work. 8 pages, 5 figure…

While traffic modeling and control rely upon effective calibration of macroscopic traffic simulation models like METANET, recent empirical work shows these models can exhibit severe sensitivity to input noise. This paper explains this phenomenon through a string-stability analysis, demonstrating that a calibrated METANET model can amplify small additive perturbations to boundary conditions along the corridor, causing the simulated state to diverge from the nominal baseline. The input sensitivity in off-nominal cases may compromise the model's capabilities for counterfactual analysis, which is required for use cases of interest like the design of large-scale variable speed limits. To address these issues, this work demonstrates how a dynamic, time-varying approach to calibrate model parameters can achieve robustness and improved accuracy of the resulting macrosimulation. We show analytically that under stated regularity and perturbation assumptions, dynamic calibration achieves a tighter cost deviation bound than static calibration, and we validate this behavior in highway environments with synthetic and real-world data. Ultimately, this can enable more trustworthy traffic simulation and more effective evaluation of control strategies.

0.26

Toward Controllability-Aware Performance Measures: A Case Study on Controllable Highway Congestion

eess.SY ·2026-08-19 ·Shreyaa Raghavan, Edgar Ramirez-Sanchez, Zhengbing He, Cathy Wu
theory similarity 0.62
Abstract · Submitted to Transportation Research Part C: Emerging Technologies

Advancements in emerging intelligent transportation systems (ITS) have shown immense benefit in reducing congestion, emissions, and accidents and enable lower-cost alternatives to highway lane expansion. However, there currently exists no standard metric by which agencies can assess the improvement potential from these interventions. As a result, they may fail to deploy infrastructure where it will be most promising or risk investing in infrastructure that does not meaningfully enhance performance. Our objective is to guide ITS deployment by developing a metric that quantifies the upper bound of congestion improvement from controlling speed limits on a highway. We propose controllable congestion, a metric that quantifies the maximum achievable reduction in system delay. To estimate controllable congestion, we develop a nonlinear optimization framework grounded in a reformulation of the METANET macroscopic traffic model and solved using model predictive control (MPC). Using both a synthetic scenario and highway data from the I-24 SMART Corridor in Tennessee, we find that controllable congestion is largely independent of total delay, revealing that for two days with identical travel times, controllable congestion can vary from 13\% to 80\%. We further show that the realizable share of this upper bound depends on the operational constraints imposed. On I-24, the minimum posted speed limit has little effect on controllable congestion, while frequency of speed limit update and maximum difference between adjacent gantries have large impacts. This framework allows highway operators to distinguish between congestion that is structurally unavoidable and congestion that is highly responsive to ITS, enabling more cost-effective deployment of control-based traffic infrastructure.

0.27

REARL: A Closed-loop Autonomous Driving Simulation Enhancement Framework with Real Traffic Data and Large Language Models

cs.LG ·2026-09-17 ·Xiaojun Bi, Jun Jiang, Yiwen Sun, Quanyi Ou, Yizhi Ma +4 more
similarity 0.59
Abstract · 14 pages, 8 figures, 3 tables. Corresponding author: Yiwen Sun. This work was supported by the National Natural Science Foundation of China …

Accurate simulation is crucial for autonomous driving development, yet capturing real-world traffic complexity remains challenging. Existing simulators that rely on predefined rules or static data playback struggle with dynamic traffic. CRITICAL uses real traffic data and a large language model (LLM) to adjust the initial simulation configuration, but the simulated distribution still diverges from real traffic as the rollout evolves. We propose REARL, a closed-loop simulation enhancement framework that integrates real traffic data with LLMs. Real traffic data are clustered, and each cluster center is used as a representative scenario that provides typical real-world traffic patterns for the LLM. A timed sliding-window detector then monitors discrepancies in vehicle speed distribution and mean spacing between pairs of vehicles. If a metric exceeds a threshold, the LLM adjusts vehicle decision-making; otherwise the existing controller is kept. The LLM also selects a matching real vehicle from a traffic snapshot and modulates the simulated vehicle with reference to that real action. In a controlled HighD highway setting, compared with the CRITICAL baseline and a PPO-based learning baseline, REARL reduces the Hellinger distance for speed distributions to 0.3067 and the MAPE for mean spacing to 0.8371, while achieving a time headway (THW) of 22.8575 and a lane change rate of 0.0708.

0.20

Coordinated Lane-Level Variable Speed Limits and Ramp Metering for Successive Weaving Segments Considering Merging/Diverging Risks: A Hybrid Model Predictive Control and Multi-Agent Reinforcement Learning Approach

cs.LG math.OC ·2026-09-28 ·Guodong Ma, Baofeng Sun, Wenyu Yang, Zhihong Yao
similarity 0.57
Abstract

Successive weaving segments (SWSs) on urban expressways are bottlenecks prone to recurrent congestion and collisions, requiring fine-grained active traffic management (ATM). Existing approaches struggle to balance the adaptive performance of data-driven optimization with the resilience and transferability of model-based control. We propose a hybrid framework to coordinate lane-level variable speed limits (VSLs) and ramp metering across SWSs. First, we reconstruct L-METANET, a lane-level macroscopic traffic flow model that captures free and forced lane changes. Second, we combine XGBoost-SHAP with a random-parameters binary logit (RPBL) model to derive analytical equations for merging and diverging collision risks and formulate system cost and reward functions. Third, we develop MPC-STMAPPO, a hierarchical controller integrating model predictive control (MPC) and multi-agent reinforcement learning (MARL). Its upper MPC layer uses L-METANET for long-horizon rolling optimization and generates baseline commands; its lower spatiotemporal MAPPO (ST-MAPPO) layer, enhanced with Mamba cells and graph attention, produces residual actions for short-horizon adjustment. Real-world experiments on the 18-km Eastern Expressway in Changchun, China, show that L-METANET accurately reproduces lane-changing-induced flow redistribution and capacity drops, with state evolution aligned with ground truth. XGBoost-SHAP-RPBL achieves AUCs above 0.80 in most tasks, outperforming conventional logit models. MPC-STMAPPO converges faster and performs better across multiple metrics than MPC- and MARL-based baselines. Under randomly fluctuating demand, it also significantly outperforms pure MARL in generalization, demonstrating strong potential for industrial deployment.

0.13

Towards Mode-Balanced Intersection Control: Hierarchical Coordination of Signal Timings, AV Trajectories, and Cyclist Speed Advice

eess.SY ·2026-11-10 ·Wies Siffels, Giray Önür, Azita Dabiri
similarity 0.57
Abstract

Connected and automated vehicles (AVs) enable traffic signals and vehicle trajectories to be optimised jointly, but existing co-optimisation frameworks overlook cyclists, even though they share the same intersections. We propose a hierarchical framework that optimises traffic signal timings, AV trajectories, and cyclist speed advice to reduce travel times for both motorised vehicles and cyclists. The upper level jointly optimises signal timings and cyclist speed advice, while the lower level optimises AV trajectories and also updates cyclist speed advice obtained from the higher level at a higher frequency based on the resulting signal plan. The framework is evaluated in simulation under multiple demand profiles and optimisation parameter settings. Compared with optimized vehicle trajectories with fixed-time signal control, the proposed framework reduces mean travel times by 13.6\% for AVs and 12.3\% for cyclists. Adding cyclist speed advice further reduces mean cyclist waiting time by about 80\% relative to the same framework without speed advice. These results demonstrate substantial benefits for both modes of transport.

0.27

Beyond corridor averages: Lane-level validation of microscopic freeway simulation with empirically parameterized arrivals

cs.CE ·2026-11-18 ·Korede R. Bishi, Casey Bowman, John A. Miller
similarity 0.57
Abstract

Traffic flow modeling is an essential part of civil planning around the world, and traffic simulation is an important component of the analyses that city planners must perform to ensure safe and efficient road networks for their citizens. This work advances microscopic traffic simulation through lane-level validation of speed and flow dynamics, addressing a critical gap in conventional macro-aggregated approaches. We systematically evaluate the trade-offs between numerical integration methods and vehicle arrival processes when reproducing empirical trajectory data from California's freeway network. Results demonstrate that numerical-integrator choice has negligible impact on simulation accuracy, with less than one percent variation across eight methods, while vehicle arrival-process modeling substantially affects fidelity. The shifted Erlang-2 distribution reduces flow-prediction error by approximately 28% compared to Poisson processes by enforcing a realistic minimum headway. Lane-level validation across five detector stations reveals lane-specific dynamics that aggregated metrics often obscure.

0.33

Eco-MP: Ecological Max-Pressure Traffic Signal Control with Ecological Driving

eess.SY ·2026-11-04 ·Haoran Wang, Shuoyuan Li, Chaopeng Tan, Hao Liu, Keshuang Tang +1 more
similarity 0.57
Abstract · 27 pages, 11 figures

Max-pressure (MP) traffic signal control provides a decentralized mechanism for urban networks, but conventional pressure states do not directly capture the propulsion burden generated by signal-induced stop-and-go traffic. Eco-driving, by contrast, typically relies on prespecified signal information and optimizes vehicle trajectories separately from the feedback among vehicle motion, traffic states, and signal decisions. This paper develops Ecological Max-Pressure (Eco-MP), a closed-loop framework that integrates ecological MP signal control with MP-adaptive ecological driving. At the signal layer, connected-vehicle observations are aggregated into a common movement state based on cumulative positive propulsion work, and the resulting upstream--downstream ecological pressure determines phase selection in mixed petrol and electric traffic. At the vehicle layer, a rolling signal interface translates the evolving Eco-MP process into near-term signal information, while each connected and automated vehicle solves a powertrain-independent finite-horizon trajectory problem subject to vehicle-dynamic, car-following, and signal-compliance constraints to reduce unnecessary stopping and acceleration effort. Under full-state information, a finite-storage Lyapunov analysis establishes strong stability for admissible demands satisfying a strict supportability condition and extends the result to the coupled signal--vehicle system. When ecological driving enlarges the admissible-flow sets, the coupled admissible demand region contains the signal-only region. Microscopic experiments on an Amsterdam arterial corridor show that, relative to queue-based MP, Eco-MP reduces mean positive propulsion work by 5.2%, vehicle delay by 20.8%, and stopping time by 39.0%. With only 15% of vehicles directly controlled, ecological driving further reduces positive propulsion work by 4.2% and stopping time by 19.6%......

0.31

A unified dynamical modeling framework for cruise control and adaptive cruise control

cs.ET ·2026-08-24 ·Mingfeng Shang, Shian Wang
similarity 0.56
Abstract

Adaptive cruise control (ACC) vehicles are the first generation of automated vehicles. While fully automated vehicles are expected to benefit traffic flow, field experiments have shown that commercially available ACC vehicles may instead degrade it by reducing string stability and roadway throughput. To mitigate these effects, existing studies adjust the ACC control algorithm or introduce additional control inputs; however, few have examined the transition between the cruise control (CC) and ACC modes without modifying the ACC control algorithm itself, leaving the impacts of ACC vehicles incompletely understood. To address this gap, we propose a unified dynamical model of CC and ACC that interpolates continuously between the two modes through a sigmoid weighting function, and improve traffic flow by designing the mode switching. Based on this new model, we conduct an equilibrium and string stability analysis of the platoon, revealing the trade-off among safety, throughput, and string stability. The optimal switching threshold is designed under throughput-priority and safety-priority criteria, and compared against the threshold adopted by commercially available ACC vehicles. Numerical experiments show that, with a properly designed switching threshold, the throughput increases by up to 58.6% and the average speed variation, a measure of speed oscillations, decreases by up to 39.7% relative to the commercial baseline. We conclude that the excessively large switching threshold of commercially available ACC vehicles is a likely cause of their negative impact on traffic flow, and that this impact can be mitigated by properly reducing the threshold toward a safer and more string-stable regime.

0.27