CS Paper Radar

Eco-MP: Ecological Max-Pressure Traffic Signal Control with Ecological Driving

Haoran Wang, Shuoyuan Li, Chaopeng Tan, Hao Liu, Keshuang Tang, Jia Hu

eess.SY ·submitted 2026-11-04 08:37 UTC · v1

Abstract

Max-pressure (MP) traffic signal control provides a decentralized mechanism for urban networks, but conventional pressure states do not directly capture the propulsion burden generated by signal-induced stop-and-go traffic. Eco-driving, by contrast, typically relies on prespecified signal information and optimizes vehicle trajectories separately from the feedback among vehicle motion, traffic states, and signal decisions. This paper develops Ecological Max-Pressure (Eco-MP), a closed-loop framework that integrates ecological MP signal control with MP-adaptive ecological driving. At the signal layer, connected-vehicle observations are aggregated into a common movement state based on cumulative positive propulsion work, and the resulting upstream--downstream ecological pressure determines phase selection in mixed petrol and electric traffic. At the vehicle layer, a rolling signal interface translates the evolving Eco-MP process into near-term signal information, while each connected and automated vehicle solves a powertrain-independent finite-horizon trajectory problem subject to vehicle-dynamic, car-following, and signal-compliance constraints to reduce unnecessary stopping and acceleration effort. Under full-state information, a finite-storage Lyapunov analysis establishes strong stability for admissible demands satisfying a strict supportability condition and extends the result to the coupled signal--vehicle system. When ecological driving enlarges the admissible-flow sets, the coupled admissible demand region contains the signal-only region. Microscopic experiments on an Amsterdam arterial corridor show that, relative to queue-based MP, Eco-MP reduces mean positive propulsion work by 5.2%, vehicle delay by 20.8%, and stopping time by 39.0%. With only 15% of vehicles directly controlled, ecological driving further reduces positive propulsion work by 4.2% and stopping time by 19.6%......

Comment
27 pages, 11 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Review of Max-Pressure Traffic Signal Control Algorithms: State of the Art and Research Opportunities

eess.SY math.OC ·2026-11-02 ·Abdullah Al Asif, Chaopeng Tan, Vikash V. Gayah, Hao Liu
survey similarity 0.70
Abstract · 49 pages, 7 figures

Max-Pressure (MP) has emerged as a widely studied decentralized traffic signal control framework, thanks to its desirable theoretical properties and strong control performance. Early research on MP focused on improving control performance by exploring different variables of the traffic state for the definition of pressure. Subsequent studies expanded MP to incorporate the complexity of real-world transportation systems and emerging technologies. This paper provides a comprehensive review of these developments. The review first introduces the theoretical foundations of MP and examines early developments in movement weight definition. It then synthesizes major extensions for multimodal and multiscale network control, followed by recent developments in connected and automated vehicle (CAV) environments and the integration of MP with artificial intelligence (AI) and data-driven methods. Beyond summarizing existing approaches, this review examines their underlying assumptions, data requirements, implementation considerations, and practical limitations. Based on this comprehensive review, key research gaps and future directions are identified, including remaining limitations in the theoretical foundations of MP and the underexplored integration of autonomous vehicle control with the MP framework. Overall, this review provides a structured perspective on the evolution and current state of MP control and highlights opportunities for developing more proactive, robust, and practically deployable MP-based traffic control methods.

0.27

Stability-Preserving Reinforcement Learning for Heterogeneity-Aware Composite Max-Pressure Traffic Signal Control

eess.SY ·2026-10-22 ·Jichen Zhu, Chaopeng Tan
similarity 0.68
Abstract

Reinforcement learning (RL) provides a flexible mechanism for adapting traffic signal control to heterogeneous traffic and sensing conditions, but directly learned signal actions do not automatically inherit the analytical properties of structured traffic-control methods. This paper proposes Com-MP, a theory-guided RL framework that learns a context-dependent composition of multiple max-pressure (MP) control preferences while retaining decentralized MP phase selection. The learned policy adapts the relative influence of constituent MP formulations according to local traffic and sensing conditions, allowing data-driven adaptation to operate within a structured traffic-control framework. We show that such intersection-specific and time-varying composition preserves strong queue stability for every demand in the strictly stabilizable region under any admissible non-anticipative composition policy, thereby separating the performance-adaptation role of learning from the stability property of the underlying controller. In a representative implementation combining detector-supported queue-based MP and connected-vehicle-supported travel-time MP, experiments on a real-world 45-intersection network show that Com-MP reduces average delay by 15.6\% and 8.6\% relative to the two constituent controllers, respectively, and by about 7.0\% relative to the best fixed composition. The learned composition responds systematically to local traffic and sensing conditions, remains effective under heterogeneous and degraded sensing, and can be transferred without retraining to an unseen network with an average delay only 2.4\% higher than that of a policy trained directly on the target network. These results show how learning-based adaptation can be introduced within a stability-preserving traffic-control structure, providing a theory-guided pathway toward trustworthy learning-enabled traffic signal control.

0.45

Decision Timescales in Max-Pressure Traffic Signal Control: Theory, Methodology, and Validation

eess.SY ·2026-10-23 ·Chaopeng Tan
benchmark similarity 0.60
Abstract · 31 pages, 11 figures

Max-pressure (MP) control adapts signal phases to prevailing traffic states, but its decision timescale is typically fixed a priori. This paper treats the decision timescale as an explicit dimension of MP control. We first characterize the trade-off between responsiveness and switching efficiency by quantifying how an equivalent switching loss reduces service capacity over a finite decision interval. This yields a load-dependent critical timescale determined by switching loss and normalized traffic load, together with a performance-oriented operating range above the stability boundary. Building on this result, we propose Variable-Timescale Max-Pressure (VT-MP), in which each intersection selects its decision interval according to local operating conditions, allowing the control timescale to vary across time and space. We establish strong stability of the resulting asynchronous heterogeneous controller under uniformly admissible local loads and bounded decision intervals, and introduce a downstream receiving-supply correction for finite-storage implementation. Three experiments provide mechanism validation and network-level evaluation. A single-intersection experiment confirms that the preferred decision interval increases systematically with traffic load and follows the derived characteristic timescales. In a store-and-forward network, heterogeneous VT-MP reduces total queueing time by 31.0% relative to the best fixed-interval benchmark. In a microscopic 5x5 SUMO network, it reduces mean trip delay by 24.3%, from 213.3 s to 161.5 s, and peak network accumulation by 12.3%. These findings show that the MP decision timescale should be treated as a traffic-state-dependent control variable rather than a fixed implementation parameter.

0.30

GuidedWAM: Training-Free Energy Guidance for World Action Models in Autonomous Driving

cs.AI cs.RO ·2026-11-05 ·Xiyan Su, Finn Rasmus Schäfer, Hojun Lim, Frank Diermeyer, Johannes Betz +1 more
similarity 0.58
Abstract

World action models (WAMs) for autonomous driving couple the driving policy and the visual world model in a single generative network whose objectives are fixed post-training. Conditioning on a new driving objective requires retraining. We study energy guidance as a general mechanism and present GuidedWAM, a model-agnostic framework for injecting driving objectives into frozen WAMs at sampling time. Our framework constructs each objective as differentiable energies on the sampler's intermediate clean-action estimate, which needs only forward access to the frozen model, and is stabilized by sampling-time guidance scheduling, per-energy normalization, and velocity-bounded correction. On the NAVSIM v2 hard-split, guidance improves all three frozen, publicly released WAMs by 1.8 to 3.6 EPDMS, averaged over three sampler seeds, and adds less than 10% to the sampling time per step. These results position energy guidance as a practical post-training control channel for WAMs.

0.12

Stabilizing Traffic Flow Via Autonomous Vehicles: A Less Conservative Approach

eess.SY ·2026-09-08 ·MirSaleh Bahavarnia, Ahmad F. Taha
publishedtheory similarity 0.57
Abstract

This paper explores stabilizing traffic flow using a minimum number of autonomous vehicles (AVs) under control constraints. In contrast to most studies, we consider a heterogeneous parameter setup scenario for human-driven vehicles (HVs) to reflect real-world differences in driving behavior. While current literature uses an H-Infinity based sufficient condition to ensure the string stability of traffic flow, this often yields a conservative lower bound on the AV penetration rate to stabilize traffic flow. To reduce such conservativeness and obtain a less conservative lower bound, we ensure the string stability of traffic flow by directly imposing the possession of no growing eigenmodes. We also systematically find a minimum number of required AVs and solve for the optimal control parameters via nonlinear optimization. We finally assess the intended conservativeness reduction via numerical simulations. Quantitatively, applying our algorithm to the homogeneous HV baseline in the literature (the result built upon an H-Infinity based sufficient condition) reduces (improves) the AV penetration rate by 17.14% while ensuring the string stability of traffic flow. We observe a trade-off between the stabilization/performance degradation and the number of utilized identical AVs. Quantitatively, our last numerical simulation corroborates that the AV penetration rate can be reduced by 61.54% at the expense of 27.66% higher position difference deviation from the equilibrium and a 92.47% degradation in the real stability radius (RSR)---a metric to measure the stability robustness under the perturbation/uncertainty---associated with the aggregated linearized dynamics while ensuring the string stability of traffic flow. This trade-off helps engineers/operators make better traffic control decisions.

0.31

Integrating Traffic Noise Emission Modelling into Variable Speed Limit Control

cs.RO ·2026-09-01 ·Jiawen Meng, John Pravin Arockiasamy, Alexey Vinel
published similarity 0.57
Abstract · Accepted for publication at the IEEE Intelligent Transportation Systems Conference (ITSC), 2026

Road traffic noise remains a major environmental challenge, yet most speed management strategies are static and do not respond to short-term variations in traffic noise emissions. Although variable speed limit (VSL) systems are widely deployed for safety and congestion mitigation, traffic noise is rarely treated as an explicit operational control objective. This paper proposes a noise-aware VSL framework that integrates aggregated traffic-state estimation with a simplified CNOSSOS-EU-based emission indicator. A stage-based controller with time-varying reference thresholds dynamically adjusts discrete speed-limit levels in response to estimated emission conditions. The framework is evaluated using microscopic traffic simulation calibrated with empirical motorway data and replicated across multiple stochastic realisations. Over a 24-hour evaluation period, the adaptive strategy reduces the receiver-based equivalent sound level by 2.9 dB(A) relative to unrestricted traffic conditions, while maintaining an average vehicle speed approximately 11.3 km/h higher than a permanently imposed low-speed regime. Period-wise analysis shows that speed reductions are activated selectively when emission levels approach calibrated targets, rather than enforcing a constant intermediate limit. Traffic stability indicators reveal moderate increases in speed variability compared with unrestricted operation, but substantially lower braking intensity than under uniform low-speed enforcement. These results demonstrate the feasibility of integrating environmental performance indicators into operational speed control, providing a practical complement to conventional infrastructure-based noise mitigation measures.

0.27

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.56
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

Energy-Aware Path Following: Comparative Analysis of Reinforcement Learning and NMPC for Electric Vehicles

cs.RO cs.LGeess.SY ·2026-10-06 ·Mohamed Sabaa, Mostafa Emam
similarity 0.55
Abstract · 20 pages, 12 figures, currently submitted for review at the journal (Robotics and Autonomous Systems) https://www.sciencedirect.com/journal/…

Path-following control strategies typically follow the bi-objective optimization dilemma: minimizing deviations from a reference path while maintaining smooth speed profiles. The latter objective is especially relevant for Electric Vehicles (EVs), since their limited driving range can be extended by recovering energy through regenerative braking, a feature that has not yet been sufficiently studied in the literature. In this work, we perform a comparative analysis of four controllers under one common Frenet frame-based kinematic vehicle model, utilizing a validated energy model (VT-CPEM) with explicit regenerative braking. Herein, we implement the following controllers: Nonlinear Model Predictive Control (NMPC), Proximal Policy Optimization (PPO), gain-scheduled Ackermann state-feedback baseline (PID-SF), and a Stanley geometric baseline. To satisfy real-time requirements, we implement the NMPC using JIT-compiled CasADi. Moreover, we train the PPO using traditional straight and S-curve tracks, after which we successfully transfer the unmodified policy to unseen tracks, including: an ISO 3888-1 lane-change, a chicane, randomly-generated parameterized-splines, and a $\pm3^\circ$ graded road. In addition, the policy transfers to a dynamic single-track vehicle model with linear tires, zero-shot with an acceptable initial performance, which was optimized after brief fine-tuning. Thereby, we demonstrate that our PPO is readily transferable to more comprehensive vehicle models. We conclude with a performance analysis of developed controllers and discuss ideas for future work.

0.25