CS Paper Radar

MEOM: Multi-View Expected-OKS Maximization for Human Pose Triangulation

Ziliang Xiong, Henglin Shi, Per-Erik Forssen

cs.CV ·submitted 2026-08-31 09:54 UTC · v1

Abstract

Conventional algebraic triangulation solves 3D human pose estimation (HPE) from multi-view 2D keypoints. The typical approach, decoding 2D keypoints from predicted heatmaps, is unreliable as heatmaps can be multimodal under occlusion, and collapsing them into single peaks discards their spatial distribution. We seek to use the entire heatmap to estimate 3D poses more accurately, which requires solving two problems: how to robustly fuse heatmaps across views, and how to assess the reliability of heatmaps. For the former, we introduce a novel objective, Multi-viewExpected-OKS Maximization (MEOM), that locates a 3D joint where the views agree in probability mass. For the latter, we adopt highest-density-region (HDR) calibration as a diagnostic of that mass, independently of distance-based metrics. The proposed framework covers two settings, with and without 3D supervision. Without 3D supervision, we optimize 3D poses from pretrained heatmap predictors by maximizing MEOM, achieving comparable performance with state-of-the-art methods that rely on larger backbones, temporal fusion, and simulated 3D data. On ambiguous Human3.6M (H36MA) and occluded CMU Panoptic frames, the advantage is substantial. When 3D labels are available, we train the model end-to-end with a combined MEOM and MSE loss, achieving 19.11 mm absolute MPJPE on Human3.6M outperforming the state-of-the-art volumetric approach on absolute MPJPE at half the inference cost.

Closest papers

Nearest neighbours by meaning across the whole index.

Body of Evidence: Triangulating 3D Human Pose with Geometry-Conditioned Depth

cs.CV ·2026-11-16 ·Erik Brorsson, Kilian Freitag, Josef Bengtson, Kristofer Bengtsson, Lars Hammarstrand +2 more
similarity 0.73
Abstract

Even in multi-camera setups, occlusions can leave individual body joints with only a single usable 2D observation. Such an observation defines a viewing ray but leaves the joint's depth undetermined. We introduce Body of Evidence (BoE), a multi-view 3D human pose estimator that predicts per-camera joint depths alongside 2D joint locations. To reduce monocular depth ambiguity, we propose geometry-conditioned depth prediction, which combines image features with previously reconstructed 3D body geometry as contextual depth cues. We further introduce learnable depth-aware triangulation (LDAT), which augments differentiable algebraic triangulation with predicted depth constraints, enabling reconstruction even from a single contributing camera while preserving the benefits of geometric triangulation when multiple views are available. The reconstructed 3D poses subsequently guide depth prediction in the next iteration, allowing depth estimates and 3D geometry to progressively refine each other. Experiments on CMU Panoptic demonstrate state-of-the-art in-domain performance and superior average performance across evaluated camera subsets and unseen camera arrangements. BoE is particularly effective under sparse camera coverage, outperforming the previous state of the art by 10.6 AP25 points in the challenging three-camera setting.

0.14

Human Pose Estimation by Probabilistic Mixtures of Gaussian and Uniform Distributions

cs.CV cs.LG ·2026-10-08 ·Santiago Reina Alguacil, Ezequiel López Rubio
code/data similarity 0.73
Abstract · 38 pages, 11 figures, 20 tables. Includes supplementary material. Code available at https://github.com/santiago-git19/probabilistic-pose-gmm

Despite advancements in sub-pixel decoding, modern Human Pose Estimation (HPE) architectures remain constrained by deterministic coordinate extraction from discrete heatmaps, which systematically fails under dense occlusions and Out-of-Distribution (OoD) ambiguities. To address these limitations, we propose a post-hoc continuous probabilistic framework that intercepts raw heatmaps and models them as a Gaussian Mixture Model (GMM) augmented with a spatially agnostic uniform distribution, requiring no architectural modifications or retraining. This continuous representation allows us to comprehensively explore the distinct contributions of density modeling to HPE. We show that the spatial expectation of our fitted GMM achieves precision parity with leading sub-pixel decoders without heuristic post-processing. Leveraging this continuous space, our test-time augmentation aggregates probability distributions rather than discrete activations, mitigating multi-scale heatmap poisoning. Furthermore, because our multimodal GMM parameterization isolates competing spatial hypotheses, it naturally interfaces with geometric regularizers such as Markov Random Fields. However, our analysis exposes the inherent vulnerabilities of 2D kinematic priors under perspective foreshortening and visual degradation. Crucially, this density formulation yields significant improvements in uncertainty quantification: our calibrated geometric covariance volume outperforms standard peak-intensity heuristics in OoD anomaly detection under severe occlusion. For in-distribution calibration, dynamically fusing our geometric metric via Adaptive Softmax reduces or matches baseline Area Under the Sparsification Error (AUSE) across benchmarks and degradation levels. Finally, we establish that this continuous parameterization is extensible to multi-view 3D architectures, bypassing the $\mathcal{O}(N^3)$ voxel memory bottleneck.

0.30

STA-TFM: Spatio-Temporal Aggregation Across Views TransForMer for Pose Estimation

cs.CV ·2026-09-21 ·Mena Kamel, Natalie Won, Amrut Sarangi, Sven Jager, Albert Pla Planas
publishedcode/data similarity 0.72
Abstract

Monocular 3D human pose estimation (HPE) remains challenging due to depth ambiguity, occlu- sions, and the need for temporal consistency. While multi-view methods provide superior accuracy over monocular approaches, they often require complex setups. We introduce STA-TFM, a transformer-based architecture that combines spatial and temporal information for multi-view pose estimation. The approach leverages DSTformer, a monocular feature extractor, to capture long-range pose dependencies within each view. A fusion transformer then aggregates information across views to produce coherent 3D estimates. To address training data scarcity, we use a data generation pipeline that transforms any existing 3D pose dataset into multi-view setups with controllable parameters. Experiments on various datasets demonstrate that STA-TFM outperforms existing camera-parameter-free multi-view methods. STA-TFM achieves 50.9% and 49.5% reductions in mean per joint position error (MPJPE) and mean per joint velocity error (MPJVE) on the DHP19 dataset. Furthermore, it achieves 6.7% and 7.7% respective reductions on HAA4D, and a 15.2% MPJPE reduction on TotalCapture. STA-TFM handles noisy and missing 2D inputs, supporting potential deployment in healthcare monitoring, athletic assessment, and immersive technologies. Code, training checkpoints, and data are available at https://zenodo.org/records/22832620.

0.37

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.71
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

PIVOT: A Multi-Trajectory Dataset and Testbed for Pose, Intrinsics, and Novel Viewpoint Evaluation in Real-World 3D Reconstruction

cs.CV cs.AI ·2026-08-26 ·Mary Raymond
benchmark similarity 0.69
Abstract

Neural radiance fields (NeRFs), 3D Gaussian Splatting (3DGS), and related novel-view synthesis methods are commonly evaluated under capture and reconstruction conditions cleaner than those encountered by robots, drones, and autonomous systems. Benchmarks often rely on reconstruction-friendly trajectories, optimized camera poses and intrinsics, and held-out views sampled from trajectories represented during training. These assumptions can obscure performance with measured poses, reusable camera calibration, and structurally different camera paths. We introduce PIVOT (Pose, Intrinsics and Viewpoint Oriented Testbed), a multi-trajectory dataset, processing pipeline, and evaluation framework for independently studying these factors. PIVOT captures each scene using diverse camera trajectories and retains, where available, both sensor-derived measured poses and COLMAP-optimized poses, together with calibrated and optimized camera intrinsics. It defines three benchmark families: (1) seen versus unseen trajectory novel-view generalization, (2) measured versus optimized pose sensitivity, and (3) calibrated versus optimized intrinsics sensitivity. We also introduce a directed pose-space Chamfer distance to quantify how well training poses cover an evaluation trajectory. PIVOT v1 contains five real-world scenes captured with a DJI Mini 4 Pro and provides an open processing and Nerfstudio-based evaluation toolchain. Benchmark results show a consistent quality gap between held-out views on represented trajectories and unseen trajectories, as well as substantial sensitivity to pose source and camera intrinsics.

0.06

UT-HMR: Uncertainty-Guided Temporal Modeling for Robust 3D Human Mesh Recovery

cs.CV ·2026-10-26 ·Zhibo Wang, Sirisha Rambhatla, Yuhao Chen, Maria Koshkina, David Clausi
published similarity 0.69
Abstract · Accepted at WACV 2027

Monocular 3D human mesh recovery (HMR) remains unreliable under weak observations caused by long camera-to-person distances, occlusion, and motion blur. In challenging scenarios such as sports, these factors make the problem highly ambiguous, as different 3D poses may yield similar 2D projections. This ambiguity is especially severe for one-stage HMR, which recovers all meshes directly from the full image without person crops or external 2D cues. To handle this ambiguity, we present UT-HMR ( Uncertainty-guided Temporal HMR), to our knowledge the first one-stage HMR framework to capture correlated pose uncertainty across joints. Each person query predicts a Gaussian distribution over the full SMPL pose with a compact low-rank-plus-diagonal covariance, which is converted into joint-wise precision weights for heteroscedastic supervision while keeping inference deterministic. Temporal early fusion further injects neighboring-frame evidence before pose decoding, supplying the visual evidence needed to resolve the ambiguity that the uncertainty captures. With a lightweight ViT-B backbone, UT-HMR achieves state-of-the-art results on VIP-HockeyPose-v2 (ice hockey) and WorldPose (soccer), reducing MPJPE, PA-MPJPE, and PVE by up to 4.7%, 3.8%, and 5.6%, and remains competitive on 3DPW against methods with larger backbones and higher input resolutions.

0.29

Hand Visibility Detector: Per-Keypoint Visibility Estimation for Hands

cs.CV ·2026-08-12 ·Ryosei Hara, Masashi Hatano, Rintaro Yanagi, Atsushi Hashimoto, Takuma Yagi +1 more
code/data similarity 0.68
Abstract · Code: https://github.com/ryhara/hand_visibility_detector

Hand Pose Estimation (HPE) is a fundamental technology for various applications such as AR/VR and robotics. In these applications, the visibility of each hand joint in the image is crucial for assessing the reliability of estimation results under occlusion. However, most existing HPE methods output joint positions without explicitly indicating their visibility. Although some methods account for occlusion or visibility, visibility estimation has mainly been used as an auxiliary signal for improving pose estimation. To our knowledge, per-joint hand visibility estimation has not been systematically studied as a standalone task. In this work, we propose Hand Visibility Detector, a model for estimating the visibility of individual hand joints, and present the first systematic investigation of visibility estimation as an independent task. We show that leveraging the prior knowledge of HPE models pretrained on large-scale data as a backbone yields high performance in this task. We further demonstrate the utility of Hand Visibility Detector on a downstream task of 3D hand pose annotation via multi-view triangulation of 2D keypoints, showing that visibility-weighted triangulation reduces reprojection error. Our method is released as a ready-to-use package, and the code and demo are available at https://github.com/ryhara/hand_visibility_detector .

0.59

PICO: Projection-Informed Consistency Optimisation for 6DoF Surgical Tool Pose Estimation

cs.CV ·2026-09-25 ·Lucy Fothergill, Pietro Valdastri, Dominic Jones, Duygu Sarikaya
published similarity 0.68
Abstract

Purpose: Accurate 6 DoF pose estimation of surgical tools is critical for automa- tion, robotic proprioception, and safe interaction with the tissue operated on. Kinematics-based approaches suffer from accumulated errors due to the cable- driven nature of robotic arms, while vision-based methods often rely on external markers or trackers. Although more recent vision-based advances have been pro- posed, these two-stage pose estimation methods often lack real-time robustness due to accumulated errors and computational overhead. Methods: We propose a novel end-to-end trainable model, PICO. Our model employs a multi-task learning architecture to predict segmentation and depth maps, alongside regression of translation and rotation parameters. We define two proxy tasks that enforce geometric consistency in both 2D and 3D spaces, improving accuracy and robustness. For this, we propose a projection loss, and a point-to-point loss. Results: We evaluate our method on the SurgRIPE dataset, benchmarking its performance against state-of-the-art approaches using standard 6DoF pose esti- mation metrics. Our results demonstrate consistently strong performance across all four subsets, specifically in rotation, ranking second even under occlusion. It also demonstrates comparable translational performance, remaining competitive, especially in occluded cases. Conclusion: PICO demonstrates the effectiveness of multi-task learning and geometry-aware proxy tasks for robust and reliable surgical tool pose estimation, especially in occluded scenarios, highlighting potential for future applications.

0.33