CS Paper Radar

Failure or Drift? Evaluating Monocular SLAM under Synthetic and Real-World Corruptions

Abhay Skaria Thomas, Shashank Agnihotri, Margret Keuper

cs.CV cs.RO ·submitted 2026-08-31 12:28 UTC · v1
publishedcode/data

Abstract

Visual SLAM is commonly evaluated on clean trajectories, although deployment failures are often caused by adverse weather, illumination, blur, and sensor artifacts. Controlled corruptions are attractive because they isolate such factors, but a synthetic stress test is useful only when it leads to the same engineering conclusion as the condition it is intended to approximate. This work examines that question for monocular SLAM. We evaluate a classical feature-based system and two learned trackers under image-space, geometry-aware, and compound corruptions, and compare their behavior with adverse conditions from 4Seasons. Rather than reducing robustness to a single trajectory error, the evaluation separates explicit tracking failure from drift accumulated by methods that remain active. The results show that learned trackers largely replace catastrophic loss with sustained, and sometimes severe, drift. More importantly, the apparent ordering of the learned systems changes with the physical fidelity of the corruption: structured rain and fog proxies preserve the real-world ordering, whereas a simple illumination proxy does not. Code is available at: https://github.com/abhaythomas/master_thesis_vslamlab_robustness.

Comment
Accepted at the 3rd NeuSLAM workshop at ECCV 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Benchmarking Visual-Inertial Odometry in Subterranean Environments Under Sensor Degradation, Miscalibration, and Dynamic Occlusion

cs.RO ·2026-09-16 ·Yueying Zhu, Xiang Li, Thien-Minh Nguyen, Xuehe Wang, Shenghai Yuan
benchmark similarity 0.68
Abstract · 8 pages, 5 figures

Visual-inertial odometry (VIO) is a core capability for autonomous operation in GPS-denied subterranean environments, yet its reliability can degrade sharply under sensor drift, calibration errors, and dynamic occlusion. Existing evaluations mainly emphasize nominal-condition accuracy, offering limited insight into when practical deployment failures occur. In this work, we present a failure-centric stress-test benchmark for VIO in underground environments using the CERBERUS dataset. We systematically evaluate four representative VIO systems spanning filtering-, optimization-, and learning-based paradigms under nine practical perturbation settings, including IMU bias and noise variation, camera intrinsic and extrinsic drift, and dynamic scene occlusion. Beyond conventional trajectory error, we analyze robustness limits through coverage ratio and failure thresholds, revealing breakdown behaviors that are not captured by nominal-condition performance alone. Our study shows distinct vulnerability patterns across VIO paradigms: some methods are more sensitive to inertial degradation, while others are more affected by geometric miscalibration or dynamic interference. These results provide deployment-oriented guidance for VIO selection, calibration prioritization, and reliable operation in challenging underground scenarios. To support reproducible evaluation and future extensions, we will release the full benchmark scripts and evaluation pipeline.

0.15

SCOUT-SLAM: Structurally-Coupled Dual Uncertainty-Aware 3DGS SLAM in the Wild

cs.CV ·2026-09-13 ·Kumaran Karthik, Pramat Shastri Jois, Suresh Sundaram
similarity 0.68
Abstract

Recently, 3D Gaussian Splatting SLAM (3DGS-SLAM) has gained significant momentum in simultaneous localization and 3DGS scene reconstruction. In real-world scenarios with rapid camera motion and cluttered dynamic environments, existing methods rely on the stability of the underlying scene reconstruction to model uncertainty. This leads to a circular dependency between camera tracking accuracy and reconstruction quality: reconstruction instabilities degrade uncertainty modeling, which affects accurate camera tracking and static scene reconstruction. To address this, the paper proposes SCOUT-SLAM, a structurally-coupled dual-uncertainty framework in which both uncertainties are estimated from a shared base network. A low-rank adaptation of this network, trained on multi-view feature consistency, estimates a tracking uncertainty that does not depend solely on the reconstruction quality. A spatially-adaptive prior modulates the network's training objective so that reconstruction instability does not inflate uncertainty on static regions, keeping the shared representation intact for both branches. Evaluations on dynamic benchmarks (TUM RGB-D, Bonn Dynamic, Wild-SLAM MoCap) demonstrate that SCOUT-SLAM achieves state-of-the-art camera tracking accuracy and artifact-free static scene reconstruction.

0.20

Does Dynamic-Point Filtering Help When Texture Is Scarce? A Controlled Study of ORB-SLAM2 Front-Ends in Synthetic Indoor Scenes

cs.RO cs.CV ·2026-10-02 ·Zekui Xue
benchmarkcode/data similarity 0.63
Abstract · 8 pages, 4 figures, submitted to IROS 2026. Open-source code and dataset available

Dynamic-point filters are routinely added to feature-based visual SLAM, and several recent systems argue that removing dynamic features can leave too few static features in low-texture regions. So far, these systems have been evaluated only on texture-rich benchmark sequences. We present a controlled study that isolates this interaction. We render synthetic indoor sequences in which surface texture (four levels, quantified by FAST-corner density and image-gradient entropy) and scene dynamics (three levels) are varied factorially along identical camera trajectories, with stereo, RGB-D, ground-truth poses and dynamic masks. On this grid we compare ORB-SLAM2 without filtering, with an optical-flow and epipolar-residual filter (FLOW), and with a multi-view depth-consistency filter (GEOM), and report trajectory error, tracking completeness and surviving static features over five runs. Because the masks give per-keypoint ground truth, we also measure each filter's dynamic-point precision and recall and its static-feature false-removal rate, so that mechanistic explanations can be tested directly. We do not propose a new filter. On 720 runs over 24 sequences, filtering helped mainly in the most dynamic cells; the benefit did not decline monotonically with texture, but at the lowest level filtering reduced tracking completeness, and ORB-SLAM2 never initialised in static L3 scenes. Contrary to our hypothesis, GEOM discarded more static keypoints than FLOW (median FRR 6.8% vs. 1.5% for RGB-D, 19.6% vs. 1.5% for stereo); its RGB-D advantage tracked dynamic-point recall and vanished in stereo mode. Data and code are available at https://github.com/felixxxue/texture-dynamics-slam.

0.38

When Does Corruption Break the Plan? A Degradation-Tolerance Benchmark for Camera-Only End-to-End Driving

cs.RO ·2026-08-29 ·Haohua Que, Handong Yao
publishedbenchmark similarity 0.62
Abstract · Accepted to WACV 2027. 17 pages, including supplementary material

Camera-only end-to-end (E2E) driving models are nearing deployment, where the camera stream is degraded by blur, noise, low light, weather, frame loss, and memory faults. How much a policy tolerates before its driving breaks is unclear. Corruption-robustness benchmarks target detection or bird's-eye-view perception, not the planning output that drives the car. We present DriveDegrade, a benchmark for image-degradation tolerance in camera-only E2E driving. Sixteen corruption families at five severities are injected on the fly inside the image loader, one operator reaching fifteen policies, and we evaluate open-loop planning on nuScenes and NAVSIM plus a CARLA closed-loop anchor. First, mild degradation barely affects planning, and the families that break it have a clear threshold at mid severity. Second, fragility is corruption-dependent: blur, JPEG, and raindrop damage planning most, while weather and bit error are tolerated far into the range. Third, a flat curve is ambiguous, so we separate corruptions that degrade the image from those that remove it. A planner that reads its camera must lose accuracy when information is deleted, whatever it does under quality loss. On these two axes the planners separate sharply, quantifying the ego-status shortcut without mistaking indifference for robustness. A released vision-language-action planner is flat on both axes, and blinding all six of its cameras costs it only 11.5 percent.

0.42

REDACT: Robust Perceptive Locomotion under Unseen Visual Corruption

cs.RO ·2026-09-21 ·Natapat Kirdwichai, Tobias Driskell-Poole, Andrei Sontea, Jadu Dash, Muhammad Burhan Hafez +1 more
code/data similarity 0.62
Abstract · 8 pages, 9 figures. Project page: https://gatjungk.github.io/REDACT/

Depth-conditioned locomotion policies have demonstrated impressive agile maneuvers, but can be steered to unpredictable actions when observations are outside their training distribution. Occlusion, invalid returns, sensor noise, and visual distractors can shift deployment observations away from nominal simulated depth. While synthetic sensor augmentation targets specified degradations, it does not by itself define behavior under corruption families omitted from training. To address gaps in training-time coverage, we present REDACT (Retaining Evidence Despite Artifacts for Continued Traversal), a teacher-student framework combining an improved visual encoder architecture, persistent feature masking, and a novel consensus-gating algorithm to retain useful depth information under unmodeled corruption. The gate uses approximate conformal calibration on clean observations alone, requiring no prior knowledge of the corruption type. Trained on clean simulated depth, REDACT retains useful visual information under unseen corruption, supporting higher traversal success than existing parkour baselines. Evaluation of depth augmentation across corruption families further shows that REDACT improves robustness where augmentation coverage is missing. Real-world trials demonstrate zero-shot transfer to structured and forested environments with unfamiliar scene content.

0.38

DASH-SLAM: Calibration-Free Metric Monocular SLAM via Depth Scale Propagation

cs.RO ·2026-11-06 ·Otavio Ribas, Jacopo Panerati, Pierre-Yves Lajoie
similarity 0.61
Abstract

Geometric foundation models estimate dense geometry and camera parameters from monocular images, but reliable SLAM also requires consistent scale and accurate data association across successive reconstructions. We present DASH-SLAM, a monocular SLAM system that integrates metric depth predictions from pretrained Depth Anything 3 into a shared-keyframe pose graph without task-specific fine-tuning. DASH-SLAM derives scale corrections from depth ratios at shared anchor images and accumulates them across reconstructions, with a damping factor controlling their influence. These corrections rescale odometry translations, loop constraints, and map geometry. Experiments on TUM, Replica, and 7-Scenes show that DASH-SLAM outperforms state-of-the-art methods. We evaluate performance using both rigid and similarity alignment to distinguish metric-scale fidelity from accuracy up to scale. We further evaluate DASH-SLAM on four challenging sequences in perceptually-degraded environments from the Unified Autonomy Stack field dataset, covering tunnels, fog, and a frozen lake. On these sequences, DASH-SLAM outperforms the foundation-model SLAM state-of-the-art and maintains tracking where classical SLAM methods fail.

0.21

LIN-SLAM: Lightweight LiDAR--Inertial Neural SLAM for Real-Time Onboard Navigation

cs.RO ·2026-10-15 ·Shiqi Che, Yijie Liu, Shuo Wang, Wenxin Liu
similarity 0.61
Abstract · 8 pages, 4 figures, submitted to Robotics and Automation Letters (RA-L)

Geometric light detection and ranging (LiDAR)--inertial simultaneous localization and mapping (SLAM) provides efficient state estimation but lacks the continuous map representation and global refinement capabilities of neural implicit SLAM, while neural implicit methods remain computationally expensive. We propose Lightweight LiDAR--Inertial Neural SLAM (LIN-SLAM), a hybrid method that couples high-rate geometric LiDAR--inertial estimation with neural implicit tracking, continual mapping, and global refinement for accurate real-time onboard SLAM. Experiments on twelve representative sequences from three datasets spanning 32-, 64-, and 128-channel LiDAR configurations show that LIN-SLAM achieves the lowest overall mean absolute trajectory error (ATE) among the evaluated state-of-the-art geometric and neural implicit methods, while substantially reducing runtime compared with existing neural implicit SLAM methods. On a Unitree Go2 equipped with an NVIDIA Jetson Orin NX and a 16-channel LiDAR, LIN-SLAM sustains real-time localization and neural mapping over a 1.47-km indoor trajectory through challenging repetitive corridor environments, with an endpoint closure error of only 0.141~m. To the best of our knowledge, LIN-SLAM is the first LiDAR--inertial SLAM system with a neural implicit backend to achieve real-time online operation on a mobile robotic platform while maintaining state-of-the-art localization accuracy. The code will be released upon acceptance.

0.17

DPGS-SLAM: Diffusion-Prior and Provenance-Aware Monocular Gaussian Splatting SLAM for Dynamic Visual Sensing

cs.RO cs.CV ·2026-11-09 ·Yifan Luo, Takafumi Matsumaru, Vibekananda Dutta, Xin He
similarity 0.60
Abstract

This paper presents DPGS-SLAM (Diffusion-Prior and Provenance-Aware Monocular Gaussian Splatting SLAM) for dense mapping in environments containing dynamic objects. Objects in dynamic motion remain a significant challenge for dense visual SLAM since dynamic observations can contaminate camera tracking and scene reconstruction. Although 3DGS (3D Gaussian splatting) enables efficient dense mapping, existing 3DGS-SLAM systems may exhibit instability when dynamic objects violate their underlying static-scene assumption. Excluding dynamic observations can reduce their influence on tracking and mapping, but may leave occluded static backgrounds missing or weakly constrained. Our proposed DPGS-SLAM is a monocular RGB SLAM framework that supports provisional representations of insufficiently observed static backgrounds through asynchronous diffusion-based background completion and provenance-aware Gaussian mapping. Dynamic regions are identified through optical-flow-based motion discovery and temporally consistent mask propagation by SAM2. For selected keyframes, a fine-tuned diffusion inpainting model generates plausible background appearance in occluded regions, while metric depth predicted from completed images initializes provisional Gaussian primitives. Provenance labels distinguish generated primitives from observation-supported primitives, excluding generated content from camera-pose estimation and observed-map optimization. When previously occluded backgrounds become visible, eligible generated primitives are removed, and observation-supported primitives are independently initialized from real RGB observations and predicted depth. Experimental results demonstrated competitive camera tracking, with average ATE RMSE values of 1.2 cm on TUM RGB-D and 2.7 cm on BONN RGB-D datasets. On StaDy4D, DPGS-SLAM improved average PSNR by 4.60 dB over WildGS-SLAM using only monocular RGB input.

0.12