CS Paper Radar

Benchmarking Visual-Inertial Odometry in Subterranean Environments Under Sensor Degradation, Miscalibration, and Dynamic Occlusion

Yueying Zhu, Xiang Li, Thien-Minh Nguyen, Xuehe Wang, Shenghai Yuan

cs.RO ·submitted 2026-09-16 13:17 UTC · v1
benchmark

Abstract

Visual-inertial odometry (VIO) is a core capability for autonomous operation in GPS-denied subterranean environments, yet its reliability can degrade sharply under sensor drift, calibration errors, and dynamic occlusion. Existing evaluations mainly emphasize nominal-condition accuracy, offering limited insight into when practical deployment failures occur. In this work, we present a failure-centric stress-test benchmark for VIO in underground environments using the CERBERUS dataset. We systematically evaluate four representative VIO systems spanning filtering-, optimization-, and learning-based paradigms under nine practical perturbation settings, including IMU bias and noise variation, camera intrinsic and extrinsic drift, and dynamic scene occlusion. Beyond conventional trajectory error, we analyze robustness limits through coverage ratio and failure thresholds, revealing breakdown behaviors that are not captured by nominal-condition performance alone. Our study shows distinct vulnerability patterns across VIO paradigms: some methods are more sensitive to inertial degradation, while others are more affected by geometric miscalibration or dynamic interference. These results provide deployment-oriented guidance for VIO selection, calibration prioritization, and reliable operation in challenging underground scenarios. To support reproducible evaluation and future extensions, we will release the full benchmark scripts and evaluation pipeline.

Comment
8 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Failure or Drift? Evaluating Monocular SLAM under Synthetic and Real-World Corruptions

cs.CV cs.RO ·2026-08-31 ·Abhay Skaria Thomas, Shashank Agnihotri, Margret Keuper
publishedcode/data similarity 0.68
Abstract · Accepted at the 3rd NeuSLAM workshop at ECCV 2026

Visual SLAM is commonly evaluated on clean trajectories, although deployment failures are often caused by adverse weather, illumination, blur, and sensor artifacts. Controlled corruptions are attractive because they isolate such factors, but a synthetic stress test is useful only when it leads to the same engineering conclusion as the condition it is intended to approximate. This work examines that question for monocular SLAM. We evaluate a classical feature-based system and two learned trackers under image-space, geometry-aware, and compound corruptions, and compare their behavior with adverse conditions from 4Seasons. Rather than reducing robustness to a single trajectory error, the evaluation separates explicit tracking failure from drift accumulated by methods that remain active. The results show that learned trackers largely replace catastrophic loss with sustained, and sometimes severe, drift. More importantly, the apparent ordering of the learned systems changes with the physical fidelity of the corruption: structured rain and fog proxies preserve the real-world ordering, whereas a simple illumination proxy does not. Code is available at: https://github.com/abhaythomas/master_thesis_vslamlab_robustness.

0.41

Not Losing Your Way: Mitigating Visual-Inertial Odometry Drift through On-Demand Visual Feature Creation

cs.RO ·2026-11-05 ·Simone D'Angelo, Gianmarco Corrado, Federico Esposito, Vincenzo Scognamiglio, Fabio Ruggiero
similarity 0.68
Abstract · 8 pages, 4 figures. Submitted to the 2027 IEEE International Conference on Robotics and Automation (ICRA 2027)

Visual-inertial odometry (VIO) can degrade during aerial inspection in repetitive or poorly textured environments. We propose an active environment-modification framework for unmanned aerial vehicles (UAVs) relying on cameras and an inertial measurement unit only, without prior maps or additional localization sensors. Inspired by the fairy tale of Tom Thumb, the UAV creates visual features on demand by releasing ground markers or marking walls through physical contact. An information-based indicator triggers interventions using temporal confirmation and hysteresis. Evaluation includes three simulated environments and a 900-run factorial campaign. Lower cruise speed and active marking are associated with reduced divergence, while accuracy among non-divergent runs depends on speed-strategy interactions. Corridor experiments, with five runs per configuration, use OptiTrack for flight control while VIO-based marking decisions remain active online. The combined framework reduces the reported position root mean square error by approximately 35% relative to baseline VIO, supporting active feature creation for drift mitigation.

0.31

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.67
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

Reflection-Robust Stereo Visual-Inertial Odometry via Kalman-Filtered Ground-Height Estimation

cs.RO ·2026-11-04 ·Uihyun Hwang, Sungjae Shin, Dongjae Kim, Hyun Myung
published similarity 0.65
Abstract · 6 pages, 5 figures, 3 tables. Presented at the 26th International Conference on Control, Automation, and Systems (ICCAS 2026), Sapporo, Japa…

Visual-inertial odometry relies on visual features that correspond to 3D points with consistent projections across sequential frames. In reflective indoor-floor environments, however, specular floor patterns can be detected and triangulated as virtual features below the physical ground plane, producing unreliable feature associations and inconsistent visual residuals. This paper proposes a lightweight reflection-aware front-end for feature-based stereo VIO. Rather than suppressing all floor-region features, the proposed method estimates the ground height in real time and rejects only feature candidates whose inferred 3D positions are below the estimated ground height. A floor-region mask restricts the validation process to reflection-prone regions, while stereo height uncertainty and pose uncertainty are used to construct frame-level ground-height measurements. A scalar Kalman filter with Normalized Innovation Squared (NIS) gating then provides a stable ground-height estimate, and an uncertainty-aware safety margin is used for selective below-ground virtual feature rejection. Experiments on real reflective-floor indoor sequences show that the proposed front-end generally improves trajectory accuracy in reflection-dominant environments while maintaining accurate ground-height estimates and recovering from actual ground-height changes.

0.43

DGV-DLIVO: Degeneracy-Guided Visual Fusion for Direct LiDAR-Inertial-Visual Odometry in Degenerate Tunnel Environments

cs.RO ·2026-11-17 ·Junrui Zhang
code/data similarity 0.64
Abstract

Reliable localization in long underground infrastructures remains a major challenge for autonomous inspection robots. In hydropower spillway tunnels and drainage galleries, repetitive geometric structures provide insufficient constraints along the tunnel axis, while weak texture and illumination variations further degrade visual estimation. Under this coupled degradation, existing LiDAR-inertial and visual-inertial odometry systems may lose the ability to recover continuous longitudinal motion. This paper presents DGV-DLIVO, a degeneracy-guided visual fusion for direct LiDAR-inertial-visual odometry for extreme tunnel environments. Instead of treating vision as a general complementary sensor, the proposed method exploits the LiDAR-degenerate direction as an active guidance signal to determine informative visual regions, establish LiDAR-anchored visual associations, and perform subspace-selective fusion. The visual constraints are introduced only into the deficient motion subspace, while unreliable LiDAR information in the same direction is adaptively suppressed and reliable geometric constraints are preserved. Real-world experiments in hydropower tunnels demonstrate that representative state-of-the-art LIO, LIVO, and VIO methods suffer from stagnation, oscillation, severe under-travel, curved drift, or divergence, whereas DGV-DLIVO maintains continuous and directionally consistent tunnel-axis motion estimation under both cart-mounted and handheld acquisition. It achieves a 91.4% progress ratio over the 40m tunnel sequence and significantly improves longitudinal recovery and trajectory stability. These results demonstrate the effectiveness of degeneracy-guided adaptive fusion for robotic inspection in severely degraded underground environments. The source code and a supplementary video are publicly available at https://github.com/0RayZhang0/DGV-DLIVO.

0.54

SUPER ODOMETRY 2.0: Resilient Odometry via Hierarchical Adaptation

cs.RO ·2026-08-26 ·Shibo Zhao, Sifan Zhou, Yuchen Zhang, Ji Zhang, Chen Wang +2 more
publishedhighly cited similarity 0.64
Abstract

Resilient and robust odometry is crucial for autonomous systems operating in complex and dynamic environments. Existing odometry systems often struggle with severe sensory degradations and extreme conditions such as smoke, sandstorms, snow, or low-light conditions, threatening both the safety and functionality of robots. To address these challenges, we present Super Odometry, a sensor fusion framework that dynamically adapts to varying levels of environmental degradation. Super Odometry employs a hierarchical structure to integrate four core modules from lower-level to higher-level adaptability including adaptive feature selection, adaptive state direction selection, adaptive engine selection, and a novel learning- based inertial odometry. The inertial odometry, trained on over 100 hours of heterogeneous robotic platforms, captures comprehensive motion dynamics. Super Odometry elevates the inertial measurement unit (IMU) to equal importance with camera and LiDAR within the sensor fusion framework, providing a reliable fallback when exteroceptive sensors fail. Super Odometry has been validated across 200 kilometers and 800 operational hours on a fleet of aerial, wheeled, and legged robots, under diverse sensor configurations, environmental degradation, and aggressive motion profiles. It marks an important step towards safe and long-term robotic autonomy in all-degraded environments.

0.69

Dynamic-LIVO: A Dynamic-Aware LiDAR-Inertial-Visual Odometry System Using Spatio-Temporal Normals

cs.RO ·2026-09-16 ·Zhixin Zhang, Samuel Ahiwe, Matthew Hale, Liang Zhao, Pawel Ladosz
similarity 0.64
Abstract · 8 pages conference

This paper proposes Dynamic-LIVO, a dynamic-aware LiDAR-Inertial-Visual Odometry (LIVO) system for robust state estimation and static colored mapping in dynamic environments. Dynamic-LIVO employs Spatio-Temporal (S-T) normal analysis to identify dynamic LiDAR points and propagates the resulting classification to both LiDAR-inertial and visual-inertial updates, preventing dynamic LiDAR measurements and their associated visual observations from affecting state estimation and mapping. However, S-T normal estimation can be unreliable in newly observed and spatially sparse regions due to insufficient spatio-temporal observations. To address this issue, we introduce a time-delayed S-T normal estimation strategy that defers the classification of insufficiently constrained points and re-evaluates them as additional observations become available. This strategy improves dynamic classification reliability while preserving valid static points for map construction. Extensive experiments on public and self-collected datasets with diverse sensor configurations demonstrate that Dynamic-LIVO improves localization accuracy and produces cleaner static colored maps in challenging dynamic environments. The source code and self-collected dataset will be publicly released upon acceptance.

0.29

When LiDAR Fades, Radar Takes Over: LiDAR Reliability-Aware Adaptive Localization Under Airborne Obscurants

cs.RO ·2026-10-09 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulo
similarity 0.63
Abstract

LiDAR-inertial odometry (LIO) is widely used for real-time localization and mapping, but its reliability can degrade substantially in subterranean environments affected by smoke, dust, and other airborne obscurants, whereas radar remains comparatively robust. This article presents a one-class temporal learning framework for LiDAR degradation detection and reliability-aware localization under such conditions. A broad set of degradation-sensitive cues, including spatial, cross-modal, geometric/motion, intensity, and measurement-recency features, is evaluated to characterize changes in LiDAR sensing quality. Their temporal evolution is modelled over sliding windows using an LSTM autoencoder trained exclusively on nominal operation, enabling deviations from healthy sensor behaviour to be detected without requiring labelled degradation data. The resulting LiDAR reliability estimate governs adaptive selection between LIO and radar inertial odometry (RIO), retaining LIO during reliable sensing and transferring localization authority to RIO when degradation is detected. The framework is evaluated using real-world ground robot data collected in GNSS-denied subterranean tunnels under nominal and dense-smoke conditions. Experimental results demonstrate degradation detection, adaptive modality switching, and continued localization output under severe LiDAR degradation. A feature family ablation study further shows that a reduced feature representation can improve degradation-aware localization performance in the evaluated dense-smoke scenarios, highlighting the importance of feature parsimony in one-class sensor degradation detection. The code will be released as open source to support reproducibility and further research.

0.19