CS Paper Radar

DGV-DLIVO: Degeneracy-Guided Visual Fusion for Direct LiDAR-Inertial-Visual Odometry in Degenerate Tunnel Environments

Junrui Zhang

cs.RO ·submitted 2026-11-17 08:36 UTC · v1
code/data

Abstract

Reliable localization in long underground infrastructures remains a major challenge for autonomous inspection robots. In hydropower spillway tunnels and drainage galleries, repetitive geometric structures provide insufficient constraints along the tunnel axis, while weak texture and illumination variations further degrade visual estimation. Under this coupled degradation, existing LiDAR-inertial and visual-inertial odometry systems may lose the ability to recover continuous longitudinal motion. This paper presents DGV-DLIVO, a degeneracy-guided visual fusion for direct LiDAR-inertial-visual odometry for extreme tunnel environments. Instead of treating vision as a general complementary sensor, the proposed method exploits the LiDAR-degenerate direction as an active guidance signal to determine informative visual regions, establish LiDAR-anchored visual associations, and perform subspace-selective fusion. The visual constraints are introduced only into the deficient motion subspace, while unreliable LiDAR information in the same direction is adaptively suppressed and reliable geometric constraints are preserved. Real-world experiments in hydropower tunnels demonstrate that representative state-of-the-art LIO, LIVO, and VIO methods suffer from stagnation, oscillation, severe under-travel, curved drift, or divergence, whereas DGV-DLIVO maintains continuous and directionally consistent tunnel-axis motion estimation under both cart-mounted and handheld acquisition. It achieves a 91.4% progress ratio over the 40m tunnel sequence and significantly improves longitudinal recovery and trajectory stability. These results demonstrate the effectiveness of degeneracy-guided adaptive fusion for robotic inspection in severely degraded underground environments. The source code and a supplementary video are publicly available at https://github.com/0RayZhang0/DGV-DLIVO.

Closest papers

Nearest neighbours by meaning across the whole index.

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.69
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

F-LIVO: A Feature-Level Geometric Measurement Framework for LiDAR-Inertial-Visual Odometry

cs.RO ·2026-10-16 ·Xinye Dai, Yapeng Wang, Shujie Zhou, Zihao Wang, Shiqi Zheng +4 more
code/data similarity 0.66
Abstract · 19 pages, 20 figures

Measurement-level LiDAR-Inertial-Visual Odometry (LIVO) can achieve high accuracy, and its practical resource requirements depend on the adopted association and map-maintenance strategy. Persistently attaching dense photometric patches or appearance attributes to mapped LiDAR points can introduce additional storage, association, and update costs. This paper presents F-LIVO, a filter-based LIVO framework that couples a visual-inertial subsystem and a LiDAR-inertial subsystem through feature-level point-to-plane constraints between visual points and LiDAR planes. To preserve cross-modal coupling when visual triangulation is weak, we further recover visual feature depth from the LiDAR map through local plane fitting and ray-plane intersection. In the LiDAR update, the covariance of each point-to-plane residual is adaptively scaled according to local planar reliability, thereby reducing overconfident updates on poorly conditioned surfaces. Because the proposed method relies on sparse geometric features rather than persistent dense photometric map attributes, it retains a compact map representation. Experiments on multiple public datasets show competitive, sequence-dependent accuracy. Across the evaluated degradation cases, F-LIVO maintains continuous estimation with comparatively low accumulated end-to-end drift. Under the evaluated resource configuration, it achieves the lowest mean and peak central processing unit (CPU) usage, the lowest peak resident set size (RSS), and the lowest RSS growth rate among the evaluated implementations, while R2LIVE retains a lower mean RSS. The source code will be made publicly available upon acceptance to facilitate reproducible research.

0.21

Degeneracy-Orthogonal Geometric Constraints for LiDAR SLAM

cs.RO ·2026-09-29 ·Minseo Kim, Yina Kim, Jinhwa Hwang, Alex Junho Lee
benchmark similarity 0.66
Abstract · 8 pages, 4 figures

Autonomous robot navigation relies on simultaneous localization and mapping (SLAM) to estimate motion and maintain an accurate pose within an environment. However, in axially uniform corridors such as long tunnels and pipelines, LiDAR odometry is fundamentally limited by unconstrained drift along the feature-weak travel direction. This structural degeneracy cannot be resolved by local scan matching alone. To address this challenge, we propose the Degeneracy-orthogonal Contour Offset Descriptor (DeCOD), a structure-aligned geometric descriptor for cross-sectional landmarks. Cross-sectional boundaries, such as pipe joints and structural rings, provide metric constraints along this degenerate axis, but distinguishing individual landmarks requires capturing subtle surface variations across nearly identical profiles. The descriptor parameterizes signed normal deviation from estimated boundary contours, and matching explicitly resolves heading ambiguity and decouples first-order contour errors by distortion estimation. Matched landmarks yield geometric factors that enforce agreement in cross-section position and corridor axis alignment during pose-graph optimization, correcting longitudinal drift while leaving rotation about the common axis unconstrained. On a public benchmark and in field experiments, DeCOD achieves robust landmark retrieval over standard 3D descriptors and successfully stabilizes trajectories across different odometry frontends, reliably constraining longitudinal drift under geometric degeneracy.

0.18

When LiDAR Fades, Radar Takes Over: LiDAR Reliability-Aware Adaptive Localization Under Airborne Obscurants

cs.RO ·2026-10-09 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulo
similarity 0.65
Abstract

LiDAR-inertial odometry (LIO) is widely used for real-time localization and mapping, but its reliability can degrade substantially in subterranean environments affected by smoke, dust, and other airborne obscurants, whereas radar remains comparatively robust. This article presents a one-class temporal learning framework for LiDAR degradation detection and reliability-aware localization under such conditions. A broad set of degradation-sensitive cues, including spatial, cross-modal, geometric/motion, intensity, and measurement-recency features, is evaluated to characterize changes in LiDAR sensing quality. Their temporal evolution is modelled over sliding windows using an LSTM autoencoder trained exclusively on nominal operation, enabling deviations from healthy sensor behaviour to be detected without requiring labelled degradation data. The resulting LiDAR reliability estimate governs adaptive selection between LIO and radar inertial odometry (RIO), retaining LIO during reliable sensing and transferring localization authority to RIO when degradation is detected. The framework is evaluated using real-world ground robot data collected in GNSS-denied subterranean tunnels under nominal and dense-smoke conditions. Experimental results demonstrate degradation detection, adaptive modality switching, and continued localization output under severe LiDAR degradation. A feature family ablation study further shows that a reduced feature representation can improve degradation-aware localization performance in the evaluated dense-smoke scenarios, highlighting the importance of feature parsimony in one-class sensor degradation detection. The code will be released as open source to support reproducibility and further research.

0.19

Benchmarking Visual-Inertial Odometry in Subterranean Environments Under Sensor Degradation, Miscalibration, and Dynamic Occlusion

cs.RO ·2026-09-16 ·Yueying Zhu, Xiang Li, Thien-Minh Nguyen, Xuehe Wang, Shenghai Yuan
benchmark similarity 0.64
Abstract · 8 pages, 5 figures

Visual-inertial odometry (VIO) is a core capability for autonomous operation in GPS-denied subterranean environments, yet its reliability can degrade sharply under sensor drift, calibration errors, and dynamic occlusion. Existing evaluations mainly emphasize nominal-condition accuracy, offering limited insight into when practical deployment failures occur. In this work, we present a failure-centric stress-test benchmark for VIO in underground environments using the CERBERUS dataset. We systematically evaluate four representative VIO systems spanning filtering-, optimization-, and learning-based paradigms under nine practical perturbation settings, including IMU bias and noise variation, camera intrinsic and extrinsic drift, and dynamic scene occlusion. Beyond conventional trajectory error, we analyze robustness limits through coverage ratio and failure thresholds, revealing breakdown behaviors that are not captured by nominal-condition performance alone. Our study shows distinct vulnerability patterns across VIO paradigms: some methods are more sensitive to inertial degradation, while others are more affected by geometric miscalibration or dynamic interference. These results provide deployment-oriented guidance for VIO selection, calibration prioritization, and reliable operation in challenging underground scenarios. To support reproducible evaluation and future extensions, we will release the full benchmark scripts and evaluation pipeline.

0.15

From LiDAR Maps to Visual Localization: Unified Visual Association for Robust Point-Line-Plane Pose Estimation

cs.RO ·2026-09-23 ·Wentao Zhao, Zikun Chen, Yihe Niu, Haoyu Chen, Jingchuan Wang
benchmark similarity 0.64
Abstract

Camera localization in a prior LiDAR map provides a persistent geometric reference for long-term robotic navigation, yet remains challenging because of the substantial modality gap between camera images and point-cloud maps. We present a unified localization framework that makes the LiDAR map visually addressable rather than relying on a dedicated image-LiDAR correspondence model. Map geometry and reflectivity are rendered into LiDAR-derived quasi-images with explicit 2D-3D provenance, enabling camera observations and rendered map views to share mature visual features and matchers for both global localization and continuous pose tracking. Point and line correspondences are established through this common visual interface, while the retained provenance recovers metric LiDAR geometry and line-supported planar constraints for pose estimation. To improve robustness under ambiguous associations and weak geometry, we further introduce a distribution-aware, observability-complementary optimization strategy. Instead of reducing matching ambiguity to a scalar confidence, candidate association distributions are propagated into directional pose-information uncertainty, and reliable structural factors are selectively reinforced according to their ability to complement the currently weak pose directions. Experiments on the EuRoC MAV benchmark and self-collected real-world sequences demonstrate accurate global localization and robust continuous 6-DoF tracking using only a pre-built LiDAR map as the persistent prior, including under severe illumination variations and dynamic occlusions.

0.14

PathLift: Depth-Conditioned Metric Lifting for Visual-Navigation Priors

cs.RO ·2026-10-12 ·Gwanjun Shin, Hyeongseok Suh, Hongmo Jung, Jongwoo Lim
published similarity 0.63
Abstract · 9 pages of main text, accepted to CoRL 2026

Generalist visual-navigation policies tell a robot which direction to go but not how far. A separate lifting step is needed at deployment to convert their unitless trajectory into a metric path that a controller can track; existing scalar lifters apply uniform scaling that misses per-waypoint corrections, while in-policy approaches that inject monocular depth into the policy inherit the prediction errors of the depth model near obstacles and at close range. We present PathLift, a per-waypoint depth-conditioned adapter that lifts a pre-trained visual-navigation policy by consuming an explicit, sensor-grade depth source (RGB-D, stereo, or projected LiDAR) and fitting per-waypoint magnitude and lateral residuals to a canonicalized prior. PathLift consistently improves closed-loop navigation across diverse visual-navigation policies in simulation and on a real wheeled robot under both stereo and LiDAR depth. By turning the policy's unitless intent into a depth-feasible metric path in a single feed-forward pass, the adapter lifts real-world success without test-time optimization.

0.29

Resilient Decentralized Radar-LiDAR-Inertial Odometry in Challenging Subterranean Environments

cs.RO ·2026-10-23 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulos
similarity 0.63
Abstract

Accurate localization in GPS-denied and visually degraded environments affected by smoke, dust, or fog remains a critical challenge for autonomous systems. While LiDAR provides high-resolution spatial perception, its performance deteriorates under particulate occlusion. In contrast, frequency-modulated continuous-wave (FMCW) radar offers robustness under such conditions but suffers from sparse measurements and outliers. This article presents a resilient decentralized LiDAR Radar Inertial Odometry (LRIO) framework that fuses the complementary strengths of LiDAR, radar, and inertial sensing to achieve robust pose estimation in challenging subterranean environments. At the core of the framework is an Adaptive Residual Thresholding (ART) mechanism that autonomously detects temporal sensor degradation and selectively adjusts the fusion process to minimize unreliable measurements. Building on this, a Robust Error-Tolerant Optimal Information Filter (RETOIF) is employed within a decentralized fusion architecture to integrate LiDAR-inertial and multiple radar-inertial odometry estimates in a fault-aware manner, enhancing resilience to environmental disturbances and intermittent sensor failures. The proposed framework is evaluated using real-world sensor data collected in GPS-denied subterranean tunnels under smoke-free and smoke-degraded conditions. In the smoke-free experiment, the proposed RETOIF framework achieves a root mean square localization error (RMSE) of 2.1733, compared with 2.9929 for the conventional centralized LRIO approach, corresponding to a 27.4\% reduction in RMSE. Experimental results further demonstrate the framework's ability to maintain pose estimation under smoke-induced sensor degradation, highlighting its potential for resilient autonomous navigation and mapping in challenging subterranean environments.

0.05