CS Paper Radar

From LiDAR Maps to Visual Localization: Unified Visual Association for Robust Point-Line-Plane Pose Estimation

Wentao Zhao, Zikun Chen, Yihe Niu, Haoyu Chen, Jingchuan Wang

cs.RO ·submitted 2026-09-23 05:05 UTC · v1
benchmark

Abstract

Camera localization in a prior LiDAR map provides a persistent geometric reference for long-term robotic navigation, yet remains challenging because of the substantial modality gap between camera images and point-cloud maps. We present a unified localization framework that makes the LiDAR map visually addressable rather than relying on a dedicated image-LiDAR correspondence model. Map geometry and reflectivity are rendered into LiDAR-derived quasi-images with explicit 2D-3D provenance, enabling camera observations and rendered map views to share mature visual features and matchers for both global localization and continuous pose tracking. Point and line correspondences are established through this common visual interface, while the retained provenance recovers metric LiDAR geometry and line-supported planar constraints for pose estimation. To improve robustness under ambiguous associations and weak geometry, we further introduce a distribution-aware, observability-complementary optimization strategy. Instead of reducing matching ambiguity to a scalar confidence, candidate association distributions are propagated into directional pose-information uncertainty, and reliable structural factors are selectively reinforced according to their ability to complement the currently weak pose directions. Experiments on the EuRoC MAV benchmark and self-collected real-world sequences demonstrate accurate global localization and robust continuous 6-DoF tracking using only a pre-built LiDAR map as the persistent prior, including under severe illumination variations and dynamic occlusions.

Closest papers

Nearest neighbours by meaning across the whole index.

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.74
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

HP2-SLAM: Adaptive Hybrid ICP for Robust and Efficient LiDAR SLAM

cs.RO ·2026-08-15 ·Nam Tran, Thu Tran, Hieu Phan, Thai Luu, Toan Nguyen +2 more
benchmark similarity 0.74
Abstract

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

0.04

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.73
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

CVSD-Reg: Cross-Modal Visual Semantic Prior Distillation for Robust LiDAR Registration

cs.CV cs.AIcs.RO ·2026-08-20 ·Eunsoo Im, Junghun Suh, Gyeonggwan Lee, Seunghwan Hong
similarity 0.73
Abstract

Learning-based global point cloud registration has achieved remarkable progress, yet its reliance on geometric representations makes existing methods sensitive to variations in point density, scan pattern, viewpoint, and sensor characteristics. We propose CVSD-Reg, a robust global LiDAR registration framework that distills visual semantic priors from a vision foundation model into LiDAR representations. In Stage 1, a Point Transformer V3 student learns from a frozen DINOv2 teacher through contrastive distillation and spherical-manifold alignment, which preserves the hyperspherical geometry of the teacher embedding space. Self-supervised InfoNCE consistency and soft $\mathrm{SE}(3)$ invariance further encourage viewpoint-robust descriptors. In Stage 2, the distilled representation is adapted to registration through correspondence learning, density-aware point-dropout augmentation, and end-to-end pose optimization. With a single checkpoint, CVSD-Reg generalizes to both single-sensor and zero-shot cross-sensor scenarios without sensor-specific adaptation and remains entirely camera-free at inference. On KITTI, nuScenes, and HeLiPR, CVSD-Reg achieves strict success rate (SR@0.5\,m/$1^\circ$) of 97.7$\%$, 99.0$\%$, and 99.3$\%$, respectively, including 97.3$\%$ on sparse 16-beam Velodyne scans. It outperforms state-of-the-art geometric registration methods by up to 44.0 percentage points without requiring camera inputs or post-hoc ICP refinement.

0.12

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.73
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

Learning Which Correspondences to Trust: Confidence-Weighted Event-Camera Localization in LiDAR Maps

cs.CV cs.RO ·2026-10-08 ·Panagiotis Kiousis, Kuangyi Chen, Jun Zhang, Friedrich Fraundorfer
code/data similarity 0.73
Abstract · 8 pages, 8 figures/tables. Submitted to IEEE ICRA 2027 (under review). Code: https://github.com/panagiotisq/CELL

Localizing an event camera against a pre-built LiDAR map can be cast as dense optical-flow estimation between a rendered depth view and an event image, followed by a Perspective-n-Point (PnP) solver over the induced 3D-2D correspondences. Existing pipelines rely on geometric consensus during pose estimation, but do not explicitly model the reliability or pose informativeness, i.e., how strongly a correspondence constrains the camera pose, of individual correspondences. We show that the natural way to learn it -- using the per-correspondence error to constrain the learning of confidence -- suffers from a depth-dependent bias: small pixel errors reside predominantly at large depths and do not lead to high pose informativeness. Instead, in our method (CELL), we learn a per-correspondence confidence end-to-end through the pose, using a differentiable probabilistic PnP whose log-partition term encourages weight configurations that yield a better-constrained pose distribution. The learned confidence is used in three ways: (i) it reweights the flow supervision in a decoupled training scheme that keeps pose gradients out of the flow/edge backbone; (ii) it drives a probabilistic correspondence selection at test time; and (iii) together with the network's edge-probability it weights a final edge-matching refinement. We further design a partial-completion depth representation that adds signal without hallucinating across large gaps. On M3ED and DSEC our full system improves over the LEAR baseline on the majority of the evaluated sequences: it reduces the median translation error by up to 26.9% and the median rotation error by up to 15.8%.

0.28

DPA-I2P: Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration in Autonomous Driving

cs.CV ·2026-08-27 ·Wenxin Zhang, Hang Li, Zhiwei Xu, Qiankun Dong, Gang Wang +1 more
similarity 0.72
Abstract

Image-to-Point Cloud Registration aims to estimate the camera pose of a given image within a 3D scene point cloud, which is a fundamental task in autonomous driving and large-scale outdoor localization. Recent implicit correspondence learning methods have improved registration performance by learning cross-modal alignment in an end-to-end framework, leading to more accurate camera pose estimation. However, due to the inherent modality discrepancy between images and sparse LiDAR point clouds, reliable cross-modal correspondence learning remains challenging. To address this issue, we propose Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration (DPA-I2P). Unlike naive depth or feature concatenation, Ray-Conditioned Metric Depth Encoding (RMDE) and Projection-Consistent Vision Lifting (PVL) exploit depth and visual cues in a structured, geometry-aware manner. In addition, Cross-Modal Query Pruning (CQP) suppresses unreliable queries during early refinement to improve matching stability. Experiments on KITTI and nuScenes demonstrate the effectiveness of the proposed method. On KITTI, DPA-I2P reduces RTE and RRE by 45.0% and 55.6% over the strongest implicit baseline, respectively. On nuScenes, DPA-I2P also improves registration accuracy over the evaluated baselines, suggesting better transferability to different driving scenes.

0.08

MIRAGE: Metric Inference and Reliability-Aware Gaussian Estimation from Feed-Forward Vision

cs.CV ·2026-10-08 ·Xinzhe Wang, Changjian Jiang, Kaiwen Song, Xudong Li, Kerui Ren +6 more
benchmarkcode/data similarity 0.72
Abstract · Project Page: https://hiroxzwang.github.io/publications/mirage/

Feed-forward 3D priors enable high-quality reconstruction from image streams but often lack reliable metric scale and suffer from long-term trajectory drift. In contrast, LiDAR--inertial estimation provides metrically accurate motion but lacks the image-space consistency needed for high-fidelity reconstruction. We propose $MIRAGE$, which anchors feed-forward visual geometry to LiDAR--IMU metric motion and regulates online pose corrections according to correspondence support and cross-modal agreement, jointly enabling accurate metric pose estimation and high-fidelity Gaussian reconstruction. Experiments on Oxford Spires, M2DGR and INS show that MIRAGE achieves accurate metric trajectory estimation, outperforming COLMAP, a widely used but computationally expensive reference for vision-only benchmarks. Motivated by the scarcity of long-horizon monocular benchmarks for large-scale indoor reconstruction, we further build a multimodal data-collection platform and use MIRAGE to establish accurate 6-DoF reference trajectories for a new vision-only benchmark. We benchmark recent monocular large-scale reconstruction methods on this dataset, providing a systematic evaluation of their performance in long-horizon indoor scenes.

0.24