CS Paper Radar

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang, Wen Li, Sheng Ao, Cheng Wang

cs.CV ·submitted 2026-09-29 00:45 UTC · v1
top venue

Abstract

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

Comment
10 pages, 8 figures, 6 tables, conference

Closest papers

Nearest neighbours by meaning across the whole index.

Transformer-based Monte Carlo Localization in Construction Meshes

cs.RO ·2026-09-25 ·Linus Kramer, William Talbot, Olga Vysotska, Marco Hutter
similarity 0.75
Abstract

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

0.18

ReLoc: Rethinking Scene Coordinate Regression Architecture for Robust Outdoor LiDAR-based Localization

cs.CV ·2026-09-27 ·Heejoon Moon, Yurim Cho, Je Hyeong Hong
published similarity 0.74
Abstract · Accepted to IROS 2026

Scene Coordinate Regression (SCR) has recently emerged as a promising approach for LiDAR-based localization, achieving accurate localization without requiring an explicit 3D map. Despite their effectiveness, existing SCR methods rely on scene classification-based global embedding that struggles to provide fine-grained discrimination among nearby locations. Moreover, their reliance on uniform sampling of local features during training assigns equal importance to all points, thereby inadvertently propagating features from dynamic objects or unstable regions and potentially degrading training stability. In this paper, we present ReLoc, a revamped SCR architecture that can effectively address these limitations. First, we redesign the global embedding module by combining learnable context tokens with a feature aggregator to capture richer and more discriminative scene context. Second, we introduce an attention-based local feature enhancement module to mitigate the impact of noisy local features while encouraging context-consistent structures, yielding more robust local feature representations. Experimental results on two large-scale outdoor datasets demonstrate that our approach achieves state-of-the-art accuracy over previous SCR-based methods while maintaining real-time inference performance.

0.24

From LiDAR Maps to Visual Localization: Unified Visual Association for Robust Point-Line-Plane Pose Estimation

cs.RO ·2026-09-23 ·Wentao Zhao, Zikun Chen, Yihe Niu, Haoyu Chen, Jingchuan Wang
benchmark similarity 0.73
Abstract

Camera localization in a prior LiDAR map provides a persistent geometric reference for long-term robotic navigation, yet remains challenging because of the substantial modality gap between camera images and point-cloud maps. We present a unified localization framework that makes the LiDAR map visually addressable rather than relying on a dedicated image-LiDAR correspondence model. Map geometry and reflectivity are rendered into LiDAR-derived quasi-images with explicit 2D-3D provenance, enabling camera observations and rendered map views to share mature visual features and matchers for both global localization and continuous pose tracking. Point and line correspondences are established through this common visual interface, while the retained provenance recovers metric LiDAR geometry and line-supported planar constraints for pose estimation. To improve robustness under ambiguous associations and weak geometry, we further introduce a distribution-aware, observability-complementary optimization strategy. Instead of reducing matching ambiguity to a scalar confidence, candidate association distributions are propagated into directional pose-information uncertainty, and reliable structural factors are selectively reinforced according to their ability to complement the currently weak pose directions. Experiments on the EuRoC MAV benchmark and self-collected real-world sequences demonstrate accurate global localization and robust continuous 6-DoF tracking using only a pre-built LiDAR map as the persistent prior, including under severe illumination variations and dynamic occlusions.

0.14

LightLoc++: Sensor-Robust Representation Learning for Efficient Outdoor LiDAR Localization

cs.CV ·2026-08-15 ·Wen Li, Shangshu Yu, Dunqiang Liu, Shaoyang Chen, Qiming Xia +4 more
datasetcode/data similarity 0.73
Abstract · v2: corrected author list (Shaoyang Chen was inadvertently omitted in v1)

Scene coordinate regression (SCR) achieves strong performance in outdoor LiDAR localization, but it usually requires scene-specific training that can take days, limiting practical deployment. Recent works improve training efficiency by decoupling SCR into a scene-agnostic backbone and scene-specific prediction heads, where the backbone is pretrained on source datasets and frozen for new scenes, and only lightweight heads are optimized. However, we find that this paradigm heavily depends on the pretrained backbone. Existing decoupled methods can match conventional SCR methods fully optimized for each new scene when LiDAR configurations are similar to those used during backbone pretraining, but their accuracy drops noticeably on datasets collected with different LiDAR sensors. This suggests that efficient LiDAR localization requires representations that capture stable scene geometry across LiDAR configurations. Motivated by this observation, we propose LightLoc++, a sensor-robust and efficient outdoor LiDAR localization framework. To support sensor-robust representation learning, we introduce SULID, a synchronized urban multi-LiDAR dataset with representative 32-, 64-, and 128-beam rotating LiDARs, extensive cross-sensor overlap, and diverse urban scenes. Using SULID, we pretrain a sensor-robust backbone through cross-sensor consistency learning. LightLoc++ further preserves efficient new-scene learning by incorporating sample classification guidance and redundant sample downsampling, which reduce regression ambiguity and computational redundancy in large-scale outdoor scenes. Extensive experiments on multiple outdoor LiDAR localization benchmarks demonstrate that LightLoc++ achieves state-of-the-art localization performance with the lowest new-scene training cost among compared methods. Code and dataset will be made available at https://github.com/liw95/LightLoc-PlusPlus.

0.24

DRS-VPT: Directly Relocalizing in a Scan with Vision Point Transformers

cs.CV cs.RO ·2026-09-11 ·Lanke Frank Tarimo Fu, Maurice Fallon
top venue similarity 0.73
Abstract

We present DRS-VPT, a feed-forward transformer architecture for foundational image-to-scan registration. Given query images and a reference 3D point cloud, the model predicts the scan pose and point map alongside the poses and point maps of each camera, all expressed in the first camera's frame. It additionally predicts a coarse-to- fine pyramid of per-point and per-pixel features for direct reprojective alignment of the scan to the first image. This formulation unifies downstream tasks such as camera-LiDAR calibration in autonomous driving and indoor camera-to-map relocalization. A single DRS-VPT model achieves state-of-the-art performance for image-to-LiDAR registration in autonomous driving, competitive indoor relocalization without training map-specific weights, and strong zero-shot transfer to unseen environments. We also show qualitatively that the model learns complex scan-to-image projection properties such as occlusion of back-facing points.

0.39

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.72
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21

HP2-SLAM: Adaptive Hybrid ICP for Robust and Efficient LiDAR SLAM

cs.RO ·2026-08-15 ·Nam Tran, Thu Tran, Hieu Phan, Thai Luu, Toan Nguyen +2 more
benchmark similarity 0.71
Abstract

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

0.04

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.71
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22