CS Paper Radar

ReLoc: Rethinking Scene Coordinate Regression Architecture for Robust Outdoor LiDAR-based Localization

Heejoon Moon, Yurim Cho, Je Hyeong Hong

cs.CV ·submitted 2026-09-27 08:16 UTC · v1
published

Abstract

Scene Coordinate Regression (SCR) has recently emerged as a promising approach for LiDAR-based localization, achieving accurate localization without requiring an explicit 3D map. Despite their effectiveness, existing SCR methods rely on scene classification-based global embedding that struggles to provide fine-grained discrimination among nearby locations. Moreover, their reliance on uniform sampling of local features during training assigns equal importance to all points, thereby inadvertently propagating features from dynamic objects or unstable regions and potentially degrading training stability. In this paper, we present ReLoc, a revamped SCR architecture that can effectively address these limitations. First, we redesign the global embedding module by combining learnable context tokens with a feature aggregator to capture richer and more discriminative scene context. Second, we introduce an attention-based local feature enhancement module to mitigate the impact of noisy local features while encouraging context-consistent structures, yielding more robust local feature representations. Experimental results on two large-scale outdoor datasets demonstrate that our approach achieves state-of-the-art accuracy over previous SCR-based methods while maintaining real-time inference performance.

Comment
Accepted to IROS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

LightLoc++: Sensor-Robust Representation Learning for Efficient Outdoor LiDAR Localization

cs.CV ·2026-08-15 ·Wen Li, Shangshu Yu, Dunqiang Liu, Shaoyang Chen, Qiming Xia +4 more
datasetcode/data similarity 0.83
Abstract · v2: corrected author list (Shaoyang Chen was inadvertently omitted in v1)

Scene coordinate regression (SCR) achieves strong performance in outdoor LiDAR localization, but it usually requires scene-specific training that can take days, limiting practical deployment. Recent works improve training efficiency by decoupling SCR into a scene-agnostic backbone and scene-specific prediction heads, where the backbone is pretrained on source datasets and frozen for new scenes, and only lightweight heads are optimized. However, we find that this paradigm heavily depends on the pretrained backbone. Existing decoupled methods can match conventional SCR methods fully optimized for each new scene when LiDAR configurations are similar to those used during backbone pretraining, but their accuracy drops noticeably on datasets collected with different LiDAR sensors. This suggests that efficient LiDAR localization requires representations that capture stable scene geometry across LiDAR configurations. Motivated by this observation, we propose LightLoc++, a sensor-robust and efficient outdoor LiDAR localization framework. To support sensor-robust representation learning, we introduce SULID, a synchronized urban multi-LiDAR dataset with representative 32-, 64-, and 128-beam rotating LiDARs, extensive cross-sensor overlap, and diverse urban scenes. Using SULID, we pretrain a sensor-robust backbone through cross-sensor consistency learning. LightLoc++ further preserves efficient new-scene learning by incorporating sample classification guidance and redundant sample downsampling, which reduce regression ambiguity and computational redundancy in large-scale outdoor scenes. Extensive experiments on multiple outdoor LiDAR localization benchmarks demonstrate that LightLoc++ achieves state-of-the-art localization performance with the lowest new-scene training cost among compared methods. Code and dataset will be made available at https://github.com/liw95/LightLoc-PlusPlus.

0.24

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.74
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

Retrieve-to-Localize: Bridging Large Language Models and LiDAR Geometry for Spatial Grounding

cs.CV cs.RO ·2026-09-24 ·Byounggun Park, Giyong Moon, Jusung Kim, Soonmin Hwang
similarity 0.73
Abstract · 8 pages

LiDAR provides precise geometric information for spatial perception tasks such as object detection in autonomous driving and outdoor robotics. However, recognizing and localizing individual objects is not sufficient to answer questions that require composing spatial relations and grounding the intended target. Motivated by recent advances in large language models (LLMs) for autonomous driving, we leverage their language priors to interpret complex spatial questions and ground the referred target in LiDAR geometry. To support this spatial grounding capability, we introduce SpatialLiDAR-QA, which combines single- and multi-step relational grounding with complementary spatial understanding tasks. We further propose SpatialLiDAR-LM, which aligns LiDAR point features with an LLM and grounds target coordinates through language-conditioned, position-aware proposal retrieval and local point refinement. This design derives target coordinates directly from local LiDAR geometry rather than through textual language decoding. Experiments demonstrate substantial improvements over representative LiDAR--language models and multi-camera VLMs on precise coordinate prediction tasks. Our dataset and model training code will be publicly released.

0.26

Transformer-based Monte Carlo Localization in Construction Meshes

cs.RO ·2026-09-25 ·Linus Kramer, William Talbot, Olga Vysotska, Marco Hutter
similarity 0.71
Abstract

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

0.18

HP2-SLAM: Adaptive Hybrid ICP for Robust and Efficient LiDAR SLAM

cs.RO ·2026-08-15 ·Nam Tran, Thu Tran, Hieu Phan, Thai Luu, Toan Nguyen +2 more
benchmark similarity 0.71
Abstract

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

0.04

GeoUniPR: A Geometry-Consistent Unified Framework for Cross-Modal Place Recognition

cs.CV ·2026-08-10 ·Wonbong Kim, Jiatong Xiao, Rui Li, Xufei Wang, Qiwen Gu +3 more
similarity 0.70
Abstract · 17 pages, 10 figures

Cross-modal place recognition (CMPR) aims to identify the same location across heterogeneous sensing modalities, such as vision and LiDAR. Existing methods commonly bridge the modality gap using complex alignment modules, multi-stage training, or full fine-tuning of pretrained backbones. In this work, we revisit CMPR from the perspective of geometric consistency and propose GeoUniPR, a unified and concise geometry-consistent framework. GeoUniPR reduces cross-modal discrepancy at the representation level by projecting LiDAR point clouds into the camera perspective to construct Geometry-Consistent depth image views (DIV), which establish direct RGB-LiDAR correspondence. We further augment DIV with native LiDAR cues, including intensity and surface-normal information, yielding a multi-channel geometric representation that improves structural consistency. Based on this representation, GeoUniPR learns a unified embedding space using two modality-specific ViT-based encoders with identical architectures, trained through parameter-efficient adaptation without auxiliary alignment modules, multi-stage training, or full backbone fine-tuning. In addition, we introduce Spatially-Consistent InfoNCE (SC-InfoNCE), a CMPR-specific contrastive objective that suppresses distance-induced false negatives under spatial continuity. Extensive experiments on KITTI and KITTI-360 demonstrate that GeoUniPR achieves state-of-the-art (SOTA) performance in both same-modal and cross-modal place recognition, with strong cross-dataset generalization.

0.10

Towards robust multimodal 3D object detection via visual foundation models

cs.CV cs.RO ·2026-09-20 ·Ziying Song, Lin Liu, Hongyu Pan, Shaoqing Xu, Lei Yang +2 more
similarity 0.70
Abstract · 27 pages, 5 figures. Bilingual English-Chinese manuscript; the complete English version appears first, followed by the complete Chinese vers…

Multimodal 3D object detection is fundamental to robust perception in autonomous driving because it integrates complementary information from LiDAR and camera sensors. However, existing methods often fail to maintain robustness under out-of-distribution (OOD) corruptions caused by sensor noise, adverse weather, and environmental changes. To address this problem, we propose RoboDistill, a robust and generalizable multimodal 3D object detection framework that leverages visual foundation models (VFMs), such as the Segment Anything Model (SAM). First, we introduce SAM-AD, a domain-specific pretraining strategy that fine-tunes SAM on autonomous-driving imagery to extract feature representations with rich semantic information. Second, we design the AD Feature Pyramid Network (AD-FPN) to refine and upsample SAM features at multiple scales for seamless fusion with LiDAR features. Third, we develop the Depth-Guided Wavelet Attention (DGWA) module, which suppresses high-frequency sensor noise while preserving critical contextual information. Finally, we introduce KD Fusion, in which the pretrained SAM-AD serves as a teacher that distills high-quality visual knowledge into a lightweight point-cloud network, thereby improving robustness under noisy conditions. Extensive experiments across 27 challenging OOD corruption settings show that RoboDistill generally delivers stronger or competitive detection performance and robustness relative to representative state-of-the-art methods. This work bridges the gap between VFMs and 3D object detection and advances robust multimodal perception for real-world autonomous-driving applications.

0.21

Ray-SCR: Generalizing Scene Coordinate Regression Across Camera Models

cs.CV ·2026-11-02 ·Jaemin Cho, Oleksii Nasypanyi, Francois Rameau
publishedcode/data similarity 0.70
Abstract · WACV 2027

Among visual localization strategies, scene coordinate regression (SCR) has emerged as an attractive approach for its compactness, accuracy, and speed. Despite these advantages, SCR models generalize poorly across substantially different camera models, such as omnidirectional or strongly rectified imagery. This limitation arises because, changes in field of view, lens distortion, or rectification-induced resampling can make the same scene content appear differently depending on its pixel position, degrading localization accuracy. To cope with this limitation, we introduce Ray-SCR, a lightweight extension to existing SCR architectures that conditions local visual features on their calibrated viewing rays and refines neighboring ray-conditioned features with a shallow local Transformer. We further formulate supervision directly in ray space and use sparse SfM points as metric anchors that link observations across views and camera models. Taken together, these components enable a single scene representation built from a panoramic mapping sequence to accurately localize query images captured with very different cameras, including pinhole, fisheye, and omnidirectional cameras. We evaluate Ray-SCR across multiple SCR architectures and on datasets with pinhole, fisheye, and omnidirectional cameras. The proposed ray conditioning substantially improves generalization across cameras and leads to state-of-the-art localization performance in these challenging cross-camera settings. The project page is available at https://jaeminch0.github.io/ray-scr-generalizing-scene-coordinate-regression-across-camera-models/.

0.33