CS Paper Radar

LightLoc++: Sensor-Robust Representation Learning for Efficient Outdoor LiDAR Localization

Wen Li, Shangshu Yu, Dunqiang Liu, Shaoyang Chen, Qiming Xia, Sheng Ao, Siqi Shen, Chenglu Wen, Cheng Wang

cs.CV ·submitted 2026-08-15 16:50 UTC · v2
datasetcode/data

Abstract

Scene coordinate regression (SCR) achieves strong performance in outdoor LiDAR localization, but it usually requires scene-specific training that can take days, limiting practical deployment. Recent works improve training efficiency by decoupling SCR into a scene-agnostic backbone and scene-specific prediction heads, where the backbone is pretrained on source datasets and frozen for new scenes, and only lightweight heads are optimized. However, we find that this paradigm heavily depends on the pretrained backbone. Existing decoupled methods can match conventional SCR methods fully optimized for each new scene when LiDAR configurations are similar to those used during backbone pretraining, but their accuracy drops noticeably on datasets collected with different LiDAR sensors. This suggests that efficient LiDAR localization requires representations that capture stable scene geometry across LiDAR configurations. Motivated by this observation, we propose LightLoc++, a sensor-robust and efficient outdoor LiDAR localization framework. To support sensor-robust representation learning, we introduce SULID, a synchronized urban multi-LiDAR dataset with representative 32-, 64-, and 128-beam rotating LiDARs, extensive cross-sensor overlap, and diverse urban scenes. Using SULID, we pretrain a sensor-robust backbone through cross-sensor consistency learning. LightLoc++ further preserves efficient new-scene learning by incorporating sample classification guidance and redundant sample downsampling, which reduce regression ambiguity and computational redundancy in large-scale outdoor scenes. Extensive experiments on multiple outdoor LiDAR localization benchmarks demonstrate that LightLoc++ achieves state-of-the-art localization performance with the lowest new-scene training cost among compared methods. Code and dataset will be made available at https://github.com/liw95/LightLoc-PlusPlus.

Comment
v2: corrected author list (Shaoyang Chen was inadvertently omitted in v1)

Closest papers

Nearest neighbours by meaning across the whole index.

ReLoc: Rethinking Scene Coordinate Regression Architecture for Robust Outdoor LiDAR-based Localization

cs.CV ·2026-09-27 ·Heejoon Moon, Yurim Cho, Je Hyeong Hong
published similarity 0.83
Abstract · Accepted to IROS 2026

Scene Coordinate Regression (SCR) has recently emerged as a promising approach for LiDAR-based localization, achieving accurate localization without requiring an explicit 3D map. Despite their effectiveness, existing SCR methods rely on scene classification-based global embedding that struggles to provide fine-grained discrimination among nearby locations. Moreover, their reliance on uniform sampling of local features during training assigns equal importance to all points, thereby inadvertently propagating features from dynamic objects or unstable regions and potentially degrading training stability. In this paper, we present ReLoc, a revamped SCR architecture that can effectively address these limitations. First, we redesign the global embedding module by combining learnable context tokens with a feature aggregator to capture richer and more discriminative scene context. Second, we introduce an attention-based local feature enhancement module to mitigate the impact of noisy local features while encouraging context-consistent structures, yielding more robust local feature representations. Experimental results on two large-scale outdoor datasets demonstrate that our approach achieves state-of-the-art accuracy over previous SCR-based methods while maintaining real-time inference performance.

0.24

HP2-SLAM: Adaptive Hybrid ICP for Robust and Efficient LiDAR SLAM

cs.RO ·2026-08-15 ·Nam Tran, Thu Tran, Hieu Phan, Thai Luu, Toan Nguyen +2 more
benchmark similarity 0.75
Abstract

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

0.04

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.74
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.73
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

Robust LIDAR Sensor-to-Sensor Domain Generalization via Accumulated-Point Scene Completion

cs.CV ·2026-10-29 ·Christoph B Rist, Larissa T Triess, Markus Enzweiler, Dariu M Gavrila
published similarity 0.73
Abstract · 2026 IEEE Intelligent Vehicles Symposium (IV)

We study domain generalization for LIDAR semantic segmentation. Deep neural networks achieve strong performance on 3D point clouds, yet real-world LIDAR exhibits sensor-specific sampling patterns that hinder transfer across datasets. In many applications, performance on completely unseen sensors is crucial. A model should preferably work on a new setup without prior access to its data or labels. To this end, we introduce a source-only training scheme that adds an occupancy prediction auxiliary objective. We aggregate source-domain scans into a simple world model and use it as the supervision signal, replacing single-scan standard segmentation training. A key property of our approach is that it does not alter the input scan. During training and testing the network consumes the same single-frame LIDAR input, only the supervision signal is enriched via the occupancy objective. At deployment, there is no runtime overhead as the auxiliary head can be dropped for pure segmentation, or kept to obtain scene completion alongside semantic segmentation. In an experimental evaluation across distinct LIDAR datasets, we demonstrate that a model's generalization to new domains can be significantly affected by how it is supervised. In certain setups, performance on unseen domains improves without any explicit domain adaptation (no target scans, no target labels, no sensor priors) and without prediction refinement. At the same time, our method maintains competitive source-domain segmentation performance and incurs no additional inference cost.

0.45

Retrieve-to-Localize: Bridging Large Language Models and LiDAR Geometry for Spatial Grounding

cs.CV cs.RO ·2026-09-24 ·Byounggun Park, Giyong Moon, Jusung Kim, Soonmin Hwang
similarity 0.73
Abstract · 8 pages

LiDAR provides precise geometric information for spatial perception tasks such as object detection in autonomous driving and outdoor robotics. However, recognizing and localizing individual objects is not sufficient to answer questions that require composing spatial relations and grounding the intended target. Motivated by recent advances in large language models (LLMs) for autonomous driving, we leverage their language priors to interpret complex spatial questions and ground the referred target in LiDAR geometry. To support this spatial grounding capability, we introduce SpatialLiDAR-QA, which combines single- and multi-step relational grounding with complementary spatial understanding tasks. We further propose SpatialLiDAR-LM, which aligns LiDAR point features with an LLM and grounds target coordinates through language-conditioned, position-aware proposal retrieval and local point refinement. This design derives target coordinates directly from local LiDAR geometry rather than through textual language decoding. Experiments demonstrate substantial improvements over representative LiDAR--language models and multi-camera VLMs on precise coordinate prediction tasks. Our dataset and model training code will be publicly released.

0.26

Towards Real-Time and Adaptable LiDAR Scene Completion

cs.CV ·2026-08-17 ·Azhar Hussian, Martin Vossiek, Vasileios Belagiannis
publishedcode/data similarity 0.72
Abstract · Accepted at ECCVW 2026, 14 pages, 4 figures. Code is available at https://github.com/AzharSindhi/RapidLiDAR

LiDAR scene completion is a key component of 3D perception in autonomous driving, where the scene must be completed in real time to be usable in downstream tasks. Existing approaches typically follow an initialize-and-refine paradigm, in which a coarse initialization of the scene is first constructed, then refined into complete 3D geometry. Generative models are slower because they iteratively refine random Gaussian noise into the scene, while non-generative methods perturb the partial scene with a fixed noise scale, which limits coverage of large gaps and occluded regions and requires manual recalibration for each new sensor configuration. We present RapidLiDAR, a LiDAR scene completion method that treats the initialization itself as a learned, data-driven component. We propose an adaptive initialization module that predicts a spatially varying displacement for each partial input point, expanding the partial observations into a coarse scene initialization adapted to the local geometry, without requiring manual noise tuning. To refine this coarse initialization into a complete and coherent scene, we additionally propose a multi-scale reconstruction module that further refines point positions by querying multi-scale 3D voxel and 2D BEV feature maps constructed from the input scan. By replacing point-neighborhood operators such as farthest point sampling and $k$-nearest neighbor search with voxel- and BEV-based feature extraction, our architecture is faster and can handle different input resolutions by design. Experiments on SemanticKITTI and KITTI-360 show that our method achieves completion performance on par with the state of the art while completing a full scene in 0.1 seconds, which is 2.3 times faster than the fastest prior method. This matches the 10 Hz acquisition rate of typical automotive LiDAR sensors, taking a step toward real-time LiDAR scene completion.

0.39

CVSD-Reg: Cross-Modal Visual Semantic Prior Distillation for Robust LiDAR Registration

cs.CV cs.AIcs.RO ·2026-08-20 ·Eunsoo Im, Junghun Suh, Gyeonggwan Lee, Seunghwan Hong
similarity 0.72
Abstract

Learning-based global point cloud registration has achieved remarkable progress, yet its reliance on geometric representations makes existing methods sensitive to variations in point density, scan pattern, viewpoint, and sensor characteristics. We propose CVSD-Reg, a robust global LiDAR registration framework that distills visual semantic priors from a vision foundation model into LiDAR representations. In Stage 1, a Point Transformer V3 student learns from a frozen DINOv2 teacher through contrastive distillation and spherical-manifold alignment, which preserves the hyperspherical geometry of the teacher embedding space. Self-supervised InfoNCE consistency and soft $\mathrm{SE}(3)$ invariance further encourage viewpoint-robust descriptors. In Stage 2, the distilled representation is adapted to registration through correspondence learning, density-aware point-dropout augmentation, and end-to-end pose optimization. With a single checkpoint, CVSD-Reg generalizes to both single-sensor and zero-shot cross-sensor scenarios without sensor-specific adaptation and remains entirely camera-free at inference. On KITTI, nuScenes, and HeLiPR, CVSD-Reg achieves strict success rate (SR@0.5\,m/$1^\circ$) of 97.7$\%$, 99.0$\%$, and 99.3$\%$, respectively, including 97.3$\%$ on sparse 16-beam Velodyne scans. It outperforms state-of-the-art geometric registration methods by up to 44.0 percentage points without requiring camera inputs or post-hoc ICP refinement.

0.12