CS Paper Radar

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang, Naigui Xiao, Jianhao Jiao, Weisong Wen

cs.RO ·submitted 2026-10-08 17:49 UTC · v1

Abstract

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

Comment
23 pages, 16 figures, 8 tables; includes appendices

Closest papers

Nearest neighbours by meaning across the whole index.

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.73
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.72
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

MIRAGE: Metric Inference and Reliability-Aware Gaussian Estimation from Feed-Forward Vision

cs.CV ·2026-10-08 ·Xinzhe Wang, Changjian Jiang, Kaiwen Song, Xudong Li, Kerui Ren +6 more
benchmarkcode/data similarity 0.71
Abstract · Project Page: https://hiroxzwang.github.io/publications/mirage/

Feed-forward 3D priors enable high-quality reconstruction from image streams but often lack reliable metric scale and suffer from long-term trajectory drift. In contrast, LiDAR--inertial estimation provides metrically accurate motion but lacks the image-space consistency needed for high-fidelity reconstruction. We propose $MIRAGE$, which anchors feed-forward visual geometry to LiDAR--IMU metric motion and regulates online pose corrections according to correspondence support and cross-modal agreement, jointly enabling accurate metric pose estimation and high-fidelity Gaussian reconstruction. Experiments on Oxford Spires, M2DGR and INS show that MIRAGE achieves accurate metric trajectory estimation, outperforming COLMAP, a widely used but computationally expensive reference for vision-only benchmarks. Motivated by the scarcity of long-horizon monocular benchmarks for large-scale indoor reconstruction, we further build a multimodal data-collection platform and use MIRAGE to establish accurate 6-DoF reference trajectories for a new vision-only benchmark. We benchmark recent monocular large-scale reconstruction methods on this dataset, providing a systematic evaluation of their performance in long-horizon indoor scenes.

0.24

LIN-SLAM: Lightweight LiDAR--Inertial Neural SLAM for Real-Time Onboard Navigation

cs.RO ·2026-10-15 ·Shiqi Che, Yijie Liu, Shuo Wang, Wenxin Liu
similarity 0.71
Abstract · 8 pages, 4 figures, submitted to Robotics and Automation Letters (RA-L)

Geometric light detection and ranging (LiDAR)--inertial simultaneous localization and mapping (SLAM) provides efficient state estimation but lacks the continuous map representation and global refinement capabilities of neural implicit SLAM, while neural implicit methods remain computationally expensive. We propose Lightweight LiDAR--Inertial Neural SLAM (LIN-SLAM), a hybrid method that couples high-rate geometric LiDAR--inertial estimation with neural implicit tracking, continual mapping, and global refinement for accurate real-time onboard SLAM. Experiments on twelve representative sequences from three datasets spanning 32-, 64-, and 128-channel LiDAR configurations show that LIN-SLAM achieves the lowest overall mean absolute trajectory error (ATE) among the evaluated state-of-the-art geometric and neural implicit methods, while substantially reducing runtime compared with existing neural implicit SLAM methods. On a Unitree Go2 equipped with an NVIDIA Jetson Orin NX and a 16-channel LiDAR, LIN-SLAM sustains real-time localization and neural mapping over a 1.47-km indoor trajectory through challenging repetitive corridor environments, with an endpoint closure error of only 0.141~m. To the best of our knowledge, LIN-SLAM is the first LiDAR--inertial SLAM system with a neural implicit backend to achieve real-time online operation on a mobile robotic platform while maintaining state-of-the-art localization accuracy. The code will be released upon acceptance.

0.17

Pelorus: Resource-Aware Lidar-Inertial Odometry

cs.RO ·2026-11-17 ·Charlotte Sieh, Mario Porrmann
code/data similarity 0.70
Abstract

Lidar-inertial odometry (LIO) has an efficiency problem. High-resolution lidars produce millions of points per second that must be processed online on the resource-constrained hardware of robots, cars, or drones, yet most LIO methods neither bound their memory nor report their compute footprint. We introduce Pelorus, a resource-aware LIO with a fixed-capacity multiresolution map of voxelized normal distributions and an iterated equivariant state estimator. A relevance-based eviction keeps the map memory bounded, and a maturity-weighted map update suppresses inconsistent observations. The pipeline runs in parallel on CPUs and GPUs. On five sequences from three public datasets, Pelorus achieves the lowest relative pose error in seven of ten metrics with a small, bounded memory footprint and, with GPU offloading, the lowest CPU load of all compared methods. On an NVIDIA Jetson Orin NX, it processes a 128-beam lidar at 10 Hz. Pelorus is open source with CUDA, Vulkan, and Metal backends.

0.20

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.69
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35

CT-SGAL-LIO: Causal Continuous Time Refinement of Discrete LiDAR Inertial Odometry

cs.RO ·2026-11-12 ·Nam Tran, Thu Tran, Toan Nguyen, William J Beksi, Tuan Dang
published similarity 0.69
Abstract · 7 pages, 4 figures, ICRA 2027 submissions

State-of-the-art LiDAR-inertial odometry methods, including those on richer state manifolds, achieve strong global accuracy, yet their pose stream alternates between propagation and correction and can oscillate over short horizons even when globally accurate. Most existing methods follow these approaches: they either modify the filter to enable faster updates or estimate a continuous-time trajectory from raw LiDAR and inertial data. The latter involves extra optimization, delaying state updates and becoming less robust during rapid rotations or accelerations. We propose CT-SGAL-LIO, a continuous-time refinement module that smooths the posterior pose stream of a discrete SGal(3) estimator without modifying the estimator itself. The key novelty is to perform continuous-time trajectory refinement directly on the projected SGal(3) posterior: we fit a cubic trajectory over a bounded window of recent poses and evaluate it at a small fixed lag. This places the query time within the observed interval, so the refined pose is obtained by interpolation rather than extrapolation, while preserving causal operation. CT-SGAL-LIO improves relative trajectory accuracy on 17 sequences from three public benchmarks. Across 17 sequences from GRAND-TOUR, MCD, and GEODE, CT-SGAL-LIO improves short-term motion accuracy while largely preserving global accuracy. RTE improves by up to 70% on GRAND-TOUR and on all seven GEODE sequences, with 9.9-51.1% reductions. A 19.5-min R-Campus run also reduces posterior jumps by 85.4% with only a 4.7 mm change in the end-to-start gap. We plan to release our source code and results to support community validation and reproducibility.

0.35

Does Online Gravity Estimation Matter? Revisiting a Silent Design Split in LiDAR-Inertial Odometry

cs.RO ·2026-09-12 ·Jie Xu, Ziyi Jin, Kangjin Yu, Can Jiang, Hongjun Huang +3 more
code/data similarity 0.69
Abstract · 8 pages, 5 figures. Code, evidence, and video: https://github.com/jiejie567/rethink-lio-gravity

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

0.47