CS Paper Radar

Pelorus: Resource-Aware Lidar-Inertial Odometry

Charlotte Sieh, Mario Porrmann

cs.RO ·submitted 2026-11-17 14:30 UTC · v1
code/data

Abstract

Lidar-inertial odometry (LIO) has an efficiency problem. High-resolution lidars produce millions of points per second that must be processed online on the resource-constrained hardware of robots, cars, or drones, yet most LIO methods neither bound their memory nor report their compute footprint. We introduce Pelorus, a resource-aware LIO with a fixed-capacity multiresolution map of voxelized normal distributions and an iterated equivariant state estimator. A relevance-based eviction keeps the map memory bounded, and a maturity-weighted map update suppresses inconsistent observations. The pipeline runs in parallel on CPUs and GPUs. On five sequences from three public datasets, Pelorus achieves the lowest relative pose error in seven of ten metrics with a small, bounded memory footprint and, with GPU offloading, the lowest CPU load of all compared methods. On an NVIDIA Jetson Orin NX, it processes a 128-beam lidar at 10 Hz. Pelorus is open source with CUDA, Vulkan, and Metal backends.

Closest papers

Nearest neighbours by meaning across the whole index.

Accelerating Large-scale Bundle Adjustment for LiDAR Mapping via Parallel Computing

cs.RO cs.CV ·2026-08-14 ·Yixi Cai, Rundong Li, Yuhan Xie, Qingwen Zhang, Patric Jensfelt +1 more
publishedcode/data similarity 0.75
Abstract · Accepted by IEEE International Conference on Automation Science and Engineering (CASE), 2026

LiDAR bundle adjustment is widely utilized in mapping to construct globally consistent point cloud maps. In this paper, we propose the first fully parallel computing framework to accelerate LiDAR bundle adjustment for large-scale mapping, incorporating three key techniques. First, we design an adaptive, asynchronous data loading strategy to efficiently process large-scale point cloud datasets on memory-constrained GPUs. Secondly, we present a novel bottom-up voxelization method for extracting planar features, enabling fully parallelized pre-processing. Thirdly, we build upon a majorization-minimization formulation to accelerate compute-intensive tasks in the optimization via parallel computation, including the computation of residuals, Jacobian and Hessian matrices, and a parallel increment solver. To support our design, we provide both theoretical and experimental analysis of the time complexity of our approach. Extensive benchmarking on large-scale public datasets across various computational platforms validates the robustness and adaptability of our approach, achieving up to a tenfold improvement in computational efficiency while preserving mapping accuracy comparable to state-of-the-art methods. To benefit future research, the implementation code is available on GitHub.

0.38

VkVIO: Cross-platform GPU Acceleration for Visual-Inertial Odometry with Vulkan

cs.RO cs.CV ·2026-09-24 ·Ole Hoffmann, Mateo de Mayo, Daniel Cremers
similarity 0.75
Abstract

Perception in robotics and XR fundamentally relies on good state estimation. Visual-inertial odometry (VIO) and Simultaneous Localization and Mapping (VI-SLAM) are proven ways of achieving this goal in a cost-effective and accurate manner. Efficiency in these systems allows for smaller, cooler, and lighter devices. GPU acceleration is a natural approach for reducing latency, thanks to their wide availability in platforms like embedded computers, mobile phones, and XR headsets. However, previous works in the literature have limited themselves to the use of CUDA for this task, significantly reducing deployment options to a single vendor. We instead leverage the vendor-agnostic Vulkan API, originally designed for the strict performance requirements of 3D graphics applications. In this work, we present VkVIO, the first, to the best of our knowledge, cross-platform GPU-accelerated VIO method. We provide state-of-the-art accuracy with causal estimates required for real-time operation. We deploy VkVIO on a diverse range of devices spanning a workstation, a laptop, and an extremely inexpensive single-board computer, while outperforming CUDA-based systems on the same hardware. VkVIO enables possibilities for low-latency, low-power, and low-cost VIO in robotics and XR.

0.25

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.70
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.70
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21

ELiCv2: Learned LiDAR Geometry Compression under Real-Time Embedded Constraints

eess.IV ·2026-11-03 ·Soowoong Kim, Junsik Kim, Gun Bang, Jinsoo Choi
similarity 0.68
Abstract

Improving learned LiDAR compression increasingly relies on heavier inference, making it harder to meet the constraints of real-time embedded systems. We present ELiCv2, which removes two sources of redundant computation in progressive coding. Its discrete entropy interface selects a precomputed integer CDF instead of materializing one from a per-voxel distribution, while its occupancy-driven kernel-map builder derives finer-level sparse-convolution kernel-maps directly from the decoded hierarchy, eliminating coordinate-based neighbor search. ELiCv2 reinvests the recovered computation budget in lightweight ego-motion-aware temporal conditioning that gathers local occupancy context from the aligned previous reconstruction. On four LiDAR datasets and an NVIDIA Jetson Thor, ELiCv2 achieves a mean BD-rate reduction of 30.97% over G-PCC with channel width C=32 while sustaining the 20Hz nuScenes capture rate. Increasing the channel width to C=64 improves the mean reduction to 35.22%.

0.26

LIN-SLAM: Lightweight LiDAR--Inertial Neural SLAM for Real-Time Onboard Navigation

cs.RO ·2026-10-15 ·Shiqi Che, Yijie Liu, Shuo Wang, Wenxin Liu
similarity 0.68
Abstract · 8 pages, 4 figures, submitted to Robotics and Automation Letters (RA-L)

Geometric light detection and ranging (LiDAR)--inertial simultaneous localization and mapping (SLAM) provides efficient state estimation but lacks the continuous map representation and global refinement capabilities of neural implicit SLAM, while neural implicit methods remain computationally expensive. We propose Lightweight LiDAR--Inertial Neural SLAM (LIN-SLAM), a hybrid method that couples high-rate geometric LiDAR--inertial estimation with neural implicit tracking, continual mapping, and global refinement for accurate real-time onboard SLAM. Experiments on twelve representative sequences from three datasets spanning 32-, 64-, and 128-channel LiDAR configurations show that LIN-SLAM achieves the lowest overall mean absolute trajectory error (ATE) among the evaluated state-of-the-art geometric and neural implicit methods, while substantially reducing runtime compared with existing neural implicit SLAM methods. On a Unitree Go2 equipped with an NVIDIA Jetson Orin NX and a 16-channel LiDAR, LIN-SLAM sustains real-time localization and neural mapping over a 1.47-km indoor trajectory through challenging repetitive corridor environments, with an endpoint closure error of only 0.141~m. To the best of our knowledge, LIN-SLAM is the first LiDAR--inertial SLAM system with a neural implicit backend to achieve real-time online operation on a mobile robotic platform while maintaining state-of-the-art localization accuracy. The code will be released upon acceptance.

0.17

MOLA LiDAR-Inertial Odometry (MOLA-LIO) on the COMFORT Localization Benchmark

cs.RO ·2026-09-22 ·Jose Luis Blanco-Claraco
publishedbenchmark similarity 0.68
Abstract · 2 pages; IROS 2026 workshop

This short report documents our entry to the COMFORT Localization Benchmark (IROS 2026), evaluated on the GrandTour dataset recorded with the Boxi payload. It extends MOLA-LO into a LiDAR-inertial system that also ingests IMU and, optionally, legged kinematic odometry. We describe the architecture, the streams consumed, the local protocol that selected the submitted configuration, and the measurements backing our real-time claim.

0.34

SE(3)-LIVOM: Adaptive Multi-LiDAR-Inertial-Visual Odometry and Mapping

cs.RO ·2026-11-17 ·Gunhee Shin, Seungjae Lee, Daebeom Kim, Seoyeon Jang, Hyun Myung
publishedcode/datahot direction similarity 0.68
Abstract · 3 pages, 2 figures, 2 tables. Overall winner of the COMFORT Challenge, IROS 2026 Workshop on Data in Field Robotics. Code: https://github.co…

This paper presents SE(3)-LIVOM, the overall winner of the COMFORT Challenge at IROS 2026. The challenge asks for the trajectory of a legged robot in the GrandTour dataset, whose scenes include collapsed buildings, construction sites and snowfields. SE(3)-LIVOM runs in real time on two LiDARs, one camera and an IMU. Its frontend extends SE(3)-LIO to multiple LiDARs and a camera. Adaptive downsampling keeps the time per scan near 35 ms within and across scenes. An online backend corrects drift with a plane bundle adjustment over submaps and an incremental pose graph. With a single configuration for all scenes, the system reaches an average ATE of 1.40 cm on the six test scenes. The code is available at https://github.com/url-kaist/se3-livom-comfort.

0.69