CS Paper Radar

VkVIO: Cross-platform GPU Acceleration for Visual-Inertial Odometry with Vulkan

Ole Hoffmann, Mateo de Mayo, Daniel Cremers

cs.RO cs.CV ·submitted 2026-09-24 18:50 UTC · v1

Abstract

Perception in robotics and XR fundamentally relies on good state estimation. Visual-inertial odometry (VIO) and Simultaneous Localization and Mapping (VI-SLAM) are proven ways of achieving this goal in a cost-effective and accurate manner. Efficiency in these systems allows for smaller, cooler, and lighter devices. GPU acceleration is a natural approach for reducing latency, thanks to their wide availability in platforms like embedded computers, mobile phones, and XR headsets. However, previous works in the literature have limited themselves to the use of CUDA for this task, significantly reducing deployment options to a single vendor. We instead leverage the vendor-agnostic Vulkan API, originally designed for the strict performance requirements of 3D graphics applications. In this work, we present VkVIO, the first, to the best of our knowledge, cross-platform GPU-accelerated VIO method. We provide state-of-the-art accuracy with causal estimates required for real-time operation. We deploy VkVIO on a diverse range of devices spanning a workstation, a laptop, and an extremely inexpensive single-board computer, while outperforming CUDA-based systems on the same hardware. VkVIO enables possibilities for low-latency, low-power, and low-cost VIO in robotics and XR.

Closest papers

Nearest neighbours by meaning across the whole index.

Pelorus: Resource-Aware Lidar-Inertial Odometry

cs.RO ·2026-11-17 ·Charlotte Sieh, Mario Porrmann
code/data similarity 0.75
Abstract

Lidar-inertial odometry (LIO) has an efficiency problem. High-resolution lidars produce millions of points per second that must be processed online on the resource-constrained hardware of robots, cars, or drones, yet most LIO methods neither bound their memory nor report their compute footprint. We introduce Pelorus, a resource-aware LIO with a fixed-capacity multiresolution map of voxelized normal distributions and an iterated equivariant state estimator. A relevance-based eviction keeps the map memory bounded, and a maturity-weighted map update suppresses inconsistent observations. The pipeline runs in parallel on CPUs and GPUs. On five sequences from three public datasets, Pelorus achieves the lowest relative pose error in seven of ten metrics with a small, bounded memory footprint and, with GPU offloading, the lowest CPU load of all compared methods. On an NVIDIA Jetson Orin NX, it processes a 128-beam lidar at 10 Hz. Pelorus is open source with CUDA, Vulkan, and Metal backends.

0.28

HexVIO: Towards All-Day Stereo-Inertial Tracking Through Commodity DSPs

cs.RO cs.CV ·2026-10-02 ·Patrick Wolf, Mateo de Mayo, Daniel Cremers
similarity 0.73
Abstract

The ability of a device to localize itself within its surroundings is a fundamental prerequisite for spatial computing. Visual-inertial odometry (VIO) has proven to be a cost-effective and accurate solution for this task. Robots, wearables, XR devices, and drones can benefit significantly from efficient implementations of VIO since they allow for cooler, lighter, and cheaper devices with longer battery life and a better user experience. In this work, we propose to enhance the efficiency of a VIO system by leveraging the Hexagon DSP, a commodity co-processor present in many modern smartphones and XR devices. Our approach offloads the visual frontend of a stereo-inertial odometry system to the DSP while keeping the backend on the main CPU. By optimizing the implementation for the DSP architecture, we achieve significant reductions in power consumption and latency compared to CPU-only execution. Our system, HexVIO, demonstrates a 67% reduction in power consumption or an 86% increase in throughput on a commodity smartphone, with the ability to sustain long-term real-time 30 fps tracking for 0.83 W, corresponding to ~18 hours of tracking on the testing device. These results highlight the potential of commodity DSPs for enabling all-day visual-inertial tracking in robotics and mobile devices.

0.10

Jetson-ORB-SLAM3: Accuracy-Preserving GPU Implementation for Edge Computing Devices

cs.RO ·2026-08-18 ·Rajat Roy, Aditya Arun Kumar Yadav, Hardik Jain
similarity 0.71
Abstract

Visual-inertial SLAM on low-power edge platforms is constrained by the cost of dense feature extraction and loop closure. Prior GPU ports of ORB-SLAM trade accuracy for speed by approximating the ORB detector, altering the feature set and therefore the estimated trajectory. We present an accuracy-preserving GPU implementation of ORB-SLAM3 for the NVIDIA Jetson Orin Nano, whose GPU ORB front end reproduces the reference CPU detector algorithmically to 94.7% exact keypoint agreement and 99.9% descriptor bit agreement. This work also makes CNN-based loop closure edge-viable through native TensorRT. The visual front end (feature extraction) is offloaded to the GPU while the mapping and optimization back end is kept on the CPU, matching each computation to the hardware it suits. The accuracy is verified by comparing four configurations: the GPU pipeline and the unmodified CPU reference, each run on both the Jetson Orin Nano and a desktop. On EuRoC dataset, all four agree to within 0.10cm in mean absolute trajectory error (SE(3)), so neither the GPU port nor the change of hardware shifts the estimated trajectory. The GPU-versus-CPU comparison is reproducible on TUM-VI and KITTI datasets, so the acceleration is accuracy-preserving rather than approximate. The proposed implementation is competitive with published ORB-SLAM3 on EuRoC, attains sub-centimeter accuracy on five of the six TUM-VI room sequences, and reaches sub-1% relative translation error on nine of eleven KITTI sequences. For loop closure, the generic ONNX-Runtime CUDA/TensorRT execution providers are unusable with our CosPlace ResNet-50 on the embedded platform, whereas a native libnvinfer FP16 engine reduces per-query inference to 2.2ms, a 180x speedup. Learned place recognition therefore runs concurrently with tracking on a 7W device. In monocular-inertial mode the system sustains 32FPS mean over the eleven EuRoC sequences.

0.23

Cross3DGS: Unified Vulkan-Based 3D Gaussian Splatting Training from Workstations to Mobile Devices

cs.CV cs.GR ·2026-11-17 ·Hiroyuki Sato, Yusuke Takimoto
publishedhot direction similarity 0.69
Abstract · Accepted to the WACV 2027 Workshop on Eyes of the Future (EOF). 19 pages including appendix

Scenes captured with handheld and wearable cameras are still shipped to a CUDA workstation for 3D Gaussian Splatting (3DGS) training. Training on the device that captured them, or on its companion phone or laptop, requires more than translating kernels: GPUs and drivers differ in parallel features, memory limits, and command submission, and these differences decide whether a training schedule executes and returns the correct update. We present Cross3DGS, a cross-vendor, cross-platform Vulkan trainer that keeps one optimizer and chooses its execution schedule per device in two steps: rules on device limits, workload size, and observed driver failures exclude the schedules known not to run correctly, and a fixed preference order selects one of the remaining feasible schedules. The same core completes standard-quality training (30k updates, one million Gaussians) on every configuration we measured, spanning NVIDIA, Intel, Arm, Qualcomm, AMD, and Apple GPUs and including Android devices and an iPhone, whereas the existing portable trainers VkSplat and Brush do not run on some of the mobile GPUs. Averaged over 11 scenes on a workstation, Cross3DGS has higher quality than VkSplat with no significant difference in training time, and Brush reports about three times the training time at comparable quality. The final quality of Cross3DGS is nearly identical across devices. A mobile application turns a handheld capture into a viewable model entirely on the device.

0.45

OpenVIO: A Versatile Open-Source Visual-Inertial Odometry System

cs.RO cs.CV ·2026-10-30 ·Seungwon Choi
benchmarkcode/data similarity 0.68
Abstract · 7 pages, 6 figures

Visual-inertial odometry (VIO) is a fundamental topic in robotics research. Beyond research, VIO has been adopted in a wide range of products. In this manuscript, we present OpenVIO, an open-source VIO system for research and practical applications. It is released under the MIT license. OpenVIO supports pinhole and fisheye cameras and extends this support to stitched 360° images. We describe each part of the system together with its design considerations. We also report benchmark results with other open-source VIO systems on public datasets. OpenVIO is available as open source at https://github.com/93won/openvio.

0.38

The Operator Mismatch Problem: Deploying BEV Perception with Portable GPU Compute

cs.AI ·2026-10-08 ·Rohit Verma, Anand V Bodas
similarity 0.67
Abstract

Modern autonomous driving systems rely on bird's-eye-view (BEV) perception models that fuse camera and LiDAR inputs to detect objects in 3D space. These models are accurate, but they cannot be deployed through standard inference runtimes. The reason is an operator mismatch between dense convolutions (which runtimes handle well), sparse 3D convolutions (which runtimes cannot represent), and geometric scatter operations (which runtimes have no vocabulary for). Today, every sparse convolution library is CUDA-only and PyTorch-coupled, locking BEV deployment to a single vendor's hardware and a single execution framework. We present BEVPIPE, a framework for deploying multimodal BEV perception pipelines using portable GPU compute APIs and integrating them with production inference runtimes. BEVPIPE partitions the model into runtime-managed dense subgraphs and three external operator extensions (voxelizer, sparse encoder, BEV projector), connected through a shared GPU memory space. BEVPIPE achieves a 19.5x end-to-end speedup over conventional deployments while retaining 98.5% of reference mAP. We also showcase that BEVPIPE is portable across different GPU backends.

0.14

OpenJaws: An Open Hardware UMI Framework with Stereo Localization for Generalist Manipulation

cs.RO ·2026-10-27 ·Adithyavairavan Murali, Yash Oza, Karanbir Chahal, Neel Jawale, Silas De Vries +4 more
benchmarkcode/data similarity 0.66
Abstract · Project page: https://open-jaws.github.io/

Handheld data-collection interfaces such as the Universal Manipulation Interface (UMI) allow manipulation demonstrations to be gathered in the wild without a robot in the loop, but the quality of the resulting action labels is bounded by the accuracy of vision-based localization. Existing systems recover end-effector pose from monocular visual-inertial odometry, which is subject to scale ambiguity and drift, or delegate tracking to closed-source modules and external infrastructure that reintroduce cost and setup burden. We present OpenJaws, a fully open hardware and software framework for sensorized UMI that improves localization and simplifies deployment across robot platforms. OpenJaws pairs a modular, 3D-printed gripper exposing a standardized ISO adapter with a low-cost stereo camera to recover metric camera trajectories. We further introduce UMI-Loc-Bench-v1, a benchmark quantifying real-world localization accuracy for handheld data-collection devices, and show that stereo localization substantially outperforms monocular alternatives. Finally, we demonstrate that policies trained on data collected with OpenJaws can be deployed on a real robot across multiple tasks. Hardware, software, and data are released under a commercially permissive license. Code, data, and videos are available at https://open-jaws.github.io/

0.29

cuRoboV2-Fast: Fast Torque-Limited Collision-Free Motion Planning

cs.RO ·2026-11-04 ·Balakumar Sundaralingam, Adithyavairavan Murali, Stan Birchfield
code/data similarity 0.65
Abstract

We present cuRoboV2-Fast, a GPU-accelerated planner that reduces both planning latency and execution time for collision-free, payload-aware, torque-limited motions. B-spline trajectory optimization reduces the required iterations, while accelerated robot computations and differentiable inverse dynamics reduce refinement cost and accommodate changing payloads. TimeOpt optimizes traversal speed along the fixed path under sampled velocity, acceleration, jerk, and torque constraints, exploiting local spline support to solve banded Newton systems efficiently on the GPU. With a 3,kg payload, cuRoboV2-Fast achieves 4.4 ms mean planning time on RTX 5090, 14.7x faster than cuRoboV2. Our method on Jetson AGX Orin plans faster than cuRoboV1 + TOPPRA on RTX 5090. A stereo-camera-based deployment on YAM achieves 5.93 s mean completed pick-and-drop cycles, 34.6% shorter than cuRoboV2. Code (Apache 2.0): https://github.com/NVlabs/curobo , Project Page: https://research.nvidia.com/labs/lpr/curobov2-fast .

0.26