CS Paper Radar

MIRAGE: Metric Inference and Reliability-Aware Gaussian Estimation from Feed-Forward Vision

Xinzhe Wang, Changjian Jiang, Kaiwen Song, Xudong Li, Kerui Ren, Ran Yi, Lizhuang Ma, Chunhua Shen, Linning Xu, Tao Lu, Mulin Yu

cs.CV ·submitted 2026-10-08 18:00 UTC · v2
benchmarkcode/data

Abstract

Feed-forward 3D priors enable high-quality reconstruction from image streams but often lack reliable metric scale and suffer from long-term trajectory drift. In contrast, LiDAR--inertial estimation provides metrically accurate motion but lacks the image-space consistency needed for high-fidelity reconstruction. We propose $MIRAGE$, which anchors feed-forward visual geometry to LiDAR--IMU metric motion and regulates online pose corrections according to correspondence support and cross-modal agreement, jointly enabling accurate metric pose estimation and high-fidelity Gaussian reconstruction. Experiments on Oxford Spires, M2DGR and INS show that MIRAGE achieves accurate metric trajectory estimation, outperforming COLMAP, a widely used but computationally expensive reference for vision-only benchmarks. Motivated by the scarcity of long-horizon monocular benchmarks for large-scale indoor reconstruction, we further build a multimodal data-collection platform and use MIRAGE to establish accurate 6-DoF reference trajectories for a new vision-only benchmark. We benchmark recent monocular large-scale reconstruction methods on this dataset, providing a systematic evaluation of their performance in long-horizon indoor scenes.

Comment
Project Page: https://hiroxzwang.github.io/publications/mirage/

Closest papers

Nearest neighbours by meaning across the whole index.

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.78
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.76
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

CT-SGAL-LIO: Causal Continuous Time Refinement of Discrete LiDAR Inertial Odometry

cs.RO ·2026-11-12 ·Nam Tran, Thu Tran, Toan Nguyen, William J Beksi, Tuan Dang
published similarity 0.75
Abstract · 7 pages, 4 figures, ICRA 2027 submissions

State-of-the-art LiDAR-inertial odometry methods, including those on richer state manifolds, achieve strong global accuracy, yet their pose stream alternates between propagation and correction and can oscillate over short horizons even when globally accurate. Most existing methods follow these approaches: they either modify the filter to enable faster updates or estimate a continuous-time trajectory from raw LiDAR and inertial data. The latter involves extra optimization, delaying state updates and becoming less robust during rapid rotations or accelerations. We propose CT-SGAL-LIO, a continuous-time refinement module that smooths the posterior pose stream of a discrete SGal(3) estimator without modifying the estimator itself. The key novelty is to perform continuous-time trajectory refinement directly on the projected SGal(3) posterior: we fit a cubic trajectory over a bounded window of recent poses and evaluate it at a small fixed lag. This places the query time within the observed interval, so the refined pose is obtained by interpolation rather than extrapolation, while preserving causal operation. CT-SGAL-LIO improves relative trajectory accuracy on 17 sequences from three public benchmarks. Across 17 sequences from GRAND-TOUR, MCD, and GEODE, CT-SGAL-LIO improves short-term motion accuracy while largely preserving global accuracy. RTE improves by up to 70% on GRAND-TOUR and on all seven GEODE sequences, with 9.9-51.1% reductions. A 19.5-min R-Campus run also reduces posterior jumps by 85.4% with only a 4.7 mm change in the end-to-start gap. We plan to release our source code and results to support community validation and reproducibility.

0.35

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.74
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

DASH-SLAM: Calibration-Free Metric Monocular SLAM via Depth Scale Propagation

cs.RO ·2026-11-06 ·Otavio Ribas, Jacopo Panerati, Pierre-Yves Lajoie
similarity 0.74
Abstract

Geometric foundation models estimate dense geometry and camera parameters from monocular images, but reliable SLAM also requires consistent scale and accurate data association across successive reconstructions. We present DASH-SLAM, a monocular SLAM system that integrates metric depth predictions from pretrained Depth Anything 3 into a shared-keyframe pose graph without task-specific fine-tuning. DASH-SLAM derives scale corrections from depth ratios at shared anchor images and accumulates them across reconstructions, with a damping factor controlling their influence. These corrections rescale odometry translations, loop constraints, and map geometry. Experiments on TUM, Replica, and 7-Scenes show that DASH-SLAM outperforms state-of-the-art methods. We evaluate performance using both rigid and similarity alignment to distinguish metric-scale fidelity from accuracy up to scale. We further evaluate DASH-SLAM on four challenging sequences in perceptually-degraded environments from the Unified Autonomy Stack field dataset, covering tunnels, fog, and a frozen lake. On these sequences, DASH-SLAM outperforms the foundation-model SLAM state-of-the-art and maintains tracking where classical SLAM methods fail.

0.21

FoundationVIO: Enforcing Metric Scale in Feed-forward Visual-Inertial Odometry

cs.RO ·2026-10-10 ·Jin Rhee, Yuhao Zhang, Frank Dellaert, Maurice Fallon
code/data similarity 0.74
Abstract

Feed-forward geometric foundation models (GFMs) directly predict dense geometry and camera poses from batches of images. Emerging visual SLAM methods chain together consecutive GFM batches to form dense point cloud maps. A core challenge is how to address the ambiguous geometric scale of GFM predictions: independent predictions are locally consistent up-to-scale but not constrained by any direct physical measurements. Models trained on data with known scale improve the consistency of GFM reconstructions but again do not directly measure it. Consequently, trajectories and 3D reconstructions from GFM-enabled SLAM methods inherit this issue. Motivated by parallels with classical visual-inertial odometry, we introduce FoundationVIO which integrates inertial sensing with GFM predictions to recover metric scale reconstruction using a factor-graph based approach. We demonstrate odometry estimates competitive with classical state-of-the-art VIO methods and accurate dense reconstructions that outperform GFM-enabled SLAM methods. We also add a minimal GFM-based loop-closure mechanism to create a full Visual-Inertial SLAM system capable of creating globally accurate reconstructions and pose estimates. We evaluate our method on three datasets with well known sensor systems and demonstrate its compatibility on ubiquitous camera and IMU sensors. The method runs at approximately real-time on a consumer-grade laptop GPU. Code: https://github.com/ori-drs/FoundationVIO.

0.28

SURE-Map: Self-Correcting Streaming Geometric Foundation Models

cs.CV ·2026-09-14 ·Mingkai Liu, Hao Zhao, Xingxing Zuo
positioncode/data similarity 0.73
Abstract · Corrected a typo in the title; manuscript content unchanged

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

0.53

From LiDAR Maps to Visual Localization: Unified Visual Association for Robust Point-Line-Plane Pose Estimation

cs.RO ·2026-09-23 ·Wentao Zhao, Zikun Chen, Yihe Niu, Haoyu Chen, Jingchuan Wang
benchmark similarity 0.72
Abstract

Camera localization in a prior LiDAR map provides a persistent geometric reference for long-term robotic navigation, yet remains challenging because of the substantial modality gap between camera images and point-cloud maps. We present a unified localization framework that makes the LiDAR map visually addressable rather than relying on a dedicated image-LiDAR correspondence model. Map geometry and reflectivity are rendered into LiDAR-derived quasi-images with explicit 2D-3D provenance, enabling camera observations and rendered map views to share mature visual features and matchers for both global localization and continuous pose tracking. Point and line correspondences are established through this common visual interface, while the retained provenance recovers metric LiDAR geometry and line-supported planar constraints for pose estimation. To improve robustness under ambiguous associations and weak geometry, we further introduce a distribution-aware, observability-complementary optimization strategy. Instead of reducing matching ambiguity to a scalar confidence, candidate association distributions are propagated into directional pose-information uncertainty, and reliable structural factors are selectively reinforced according to their ability to complement the currently weak pose directions. Experiments on the EuRoC MAV benchmark and self-collected real-world sequences demonstrate accurate global localization and robust continuous 6-DoF tracking using only a pre-built LiDAR map as the persistent prior, including under severe illumination variations and dynamic occlusions.

0.14