CS Paper Radar

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach

cs.CV ·submitted 2026-11-12 10:15 UTC · v1
top venuecode/data

Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

Journal ref
U.Insalaco BMVC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

cs.RO ·2026-10-27 ·Simon Bultmann, Daniele Cattaneo, Abhinav Valada
similarity 0.77
Abstract · 8 pages, 5 figures

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.

0.20

GRIP: Gaussian Rendering as a Cross-Modal Bridge for Image-to-Point Cloud Registration

cs.CV ·2026-09-22 ·Karim Slimani, Catherine Achard, Eric Marchand, Brahim Tamadazte
similarity 0.76
Abstract

This paper introduces GRIP, a pose-conditioned refinement framework for pixel-to-point matching and 2D to 3D registration. Given an initial coarse pose estimate, GRIP addresses the structural mismatch between grid based image descriptors and unordered point cloud descriptors by softly rendering learned 3D point features onto the image grid through Gaussian feature splatting. The rendered point derived feature map is then fused with image features by a pixel aligned transformer, enabling visual semantic and geometric cues to interact in a shared 2D representation. The refined features are decoded and propagated to finer resolutions for dense correspondence estimation and final pose refinement. Experiments on RGB D Scenes V2 and 7 Scenes demonstrate state of the art inlier ratio and competitive registration recall, with stronger performance under stricter evaluation thresholds.

0.14

MIRAGE: Metric Inference and Reliability-Aware Gaussian Estimation from Feed-Forward Vision

cs.CV ·2026-10-08 ·Xinzhe Wang, Changjian Jiang, Kaiwen Song, Xudong Li, Kerui Ren +6 more
benchmarkcode/data similarity 0.76
Abstract · Project Page: https://hiroxzwang.github.io/publications/mirage/

Feed-forward 3D priors enable high-quality reconstruction from image streams but often lack reliable metric scale and suffer from long-term trajectory drift. In contrast, LiDAR--inertial estimation provides metrically accurate motion but lacks the image-space consistency needed for high-fidelity reconstruction. We propose $MIRAGE$, which anchors feed-forward visual geometry to LiDAR--IMU metric motion and regulates online pose corrections according to correspondence support and cross-modal agreement, jointly enabling accurate metric pose estimation and high-fidelity Gaussian reconstruction. Experiments on Oxford Spires, M2DGR and INS show that MIRAGE achieves accurate metric trajectory estimation, outperforming COLMAP, a widely used but computationally expensive reference for vision-only benchmarks. Motivated by the scarcity of long-horizon monocular benchmarks for large-scale indoor reconstruction, we further build a multimodal data-collection platform and use MIRAGE to establish accurate 6-DoF reference trajectories for a new vision-only benchmark. We benchmark recent monocular large-scale reconstruction methods on this dataset, providing a systematic evaluation of their performance in long-horizon indoor scenes.

0.24

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.75
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

M3GD: Multi-Modal Multi-View Geometric Diffusion for Camera--LiDAR Novel View Synthesis

cs.RO cs.CV ·2026-09-24 ·Yang Zhou, Jiuhong Xiao, Shizhao Ye, Long Quang, Carlos Nieto-Granda +1 more
similarity 0.75
Abstract

Robotic novel view synthesis (NVS) must recover both visual appearance and metric 3D structure, yet most generative NVS methods rely only on images, overlooking LiDAR, a complementary sensor common on robotic platforms. We present M3GD, a Camera--LiDAR multimodal representation for generative NVS that composes independently pretrained 2D image and 3D point-cloud foundation models without separately pretraining a cross-modal translator. We show that, after camera projection, frozen LiDAR and image features exhibit substantial shared spatial structure, providing a natural cross-modal representation. M3GD conditions generation on LiDAR through this structure: it combines explicit geometry statistics with learned point-cloud descriptors into view-aligned packets on the image-latent grid, injected through a lightweight residual adapter into a multi-view flow-matching generator whose latent space, decoders, and training objective remain intact. On the GrandTour dataset, M3GD improves target-view RGB and depth synthesis over an image-only version of the same backbone. Ablations show that the gains come from pixel-aligned LiDAR content and that target-view LiDAR acts as a geometric query linking the requested view to source observations. Deployment on a ground robot demonstrates practical real-world operation, with a configurable quality--cost trade-off controlled by the number of Euler integration steps.

0.13

DPA-I2P: Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration in Autonomous Driving

cs.CV ·2026-08-27 ·Wenxin Zhang, Hang Li, Zhiwei Xu, Qiankun Dong, Gang Wang +1 more
similarity 0.75
Abstract

Image-to-Point Cloud Registration aims to estimate the camera pose of a given image within a 3D scene point cloud, which is a fundamental task in autonomous driving and large-scale outdoor localization. Recent implicit correspondence learning methods have improved registration performance by learning cross-modal alignment in an end-to-end framework, leading to more accurate camera pose estimation. However, due to the inherent modality discrepancy between images and sparse LiDAR point clouds, reliable cross-modal correspondence learning remains challenging. To address this issue, we propose Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration (DPA-I2P). Unlike naive depth or feature concatenation, Ray-Conditioned Metric Depth Encoding (RMDE) and Projection-Consistent Vision Lifting (PVL) exploit depth and visual cues in a structured, geometry-aware manner. In addition, Cross-Modal Query Pruning (CQP) suppresses unreliable queries during early refinement to improve matching stability. Experiments on KITTI and nuScenes demonstrate the effectiveness of the proposed method. On KITTI, DPA-I2P reduces RTE and RRE by 45.0% and 55.6% over the strongest implicit baseline, respectively. On nuScenes, DPA-I2P also improves registration accuracy over the evaluated baselines, suggesting better transferability to different driving scenes.

0.08

DRS-VPT: Directly Relocalizing in a Scan with Vision Point Transformers

cs.CV cs.RO ·2026-09-11 ·Lanke Frank Tarimo Fu, Maurice Fallon
top venue similarity 0.74
Abstract

We present DRS-VPT, a feed-forward transformer architecture for foundational image-to-scan registration. Given query images and a reference 3D point cloud, the model predicts the scan pose and point map alongside the poses and point maps of each camera, all expressed in the first camera's frame. It additionally predicts a coarse-to- fine pyramid of per-point and per-pixel features for direct reprojective alignment of the scan to the first image. This formulation unifies downstream tasks such as camera-LiDAR calibration in autonomous driving and indoor camera-to-map relocalization. A single DRS-VPT model achieves state-of-the-art performance for image-to-LiDAR registration in autonomous driving, competitive indoor relocalization without training map-specific weights, and strong zero-shot transfer to unseen environments. We also show qualitatively that the model learns complex scan-to-image projection properties such as occlusion of back-facing points.

0.39

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.73
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25