CS Paper Radar

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

Simon Bultmann, Daniele Cattaneo, Abhinav Valada

cs.RO ·submitted 2026-10-27 14:51 UTC · v1

Abstract

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.

Comment
8 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.83
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.77
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

DPA-I2P: Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration in Autonomous Driving

cs.CV ·2026-08-27 ·Wenxin Zhang, Hang Li, Zhiwei Xu, Qiankun Dong, Gang Wang +1 more
similarity 0.75
Abstract

Image-to-Point Cloud Registration aims to estimate the camera pose of a given image within a 3D scene point cloud, which is a fundamental task in autonomous driving and large-scale outdoor localization. Recent implicit correspondence learning methods have improved registration performance by learning cross-modal alignment in an end-to-end framework, leading to more accurate camera pose estimation. However, due to the inherent modality discrepancy between images and sparse LiDAR point clouds, reliable cross-modal correspondence learning remains challenging. To address this issue, we propose Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration (DPA-I2P). Unlike naive depth or feature concatenation, Ray-Conditioned Metric Depth Encoding (RMDE) and Projection-Consistent Vision Lifting (PVL) exploit depth and visual cues in a structured, geometry-aware manner. In addition, Cross-Modal Query Pruning (CQP) suppresses unreliable queries during early refinement to improve matching stability. Experiments on KITTI and nuScenes demonstrate the effectiveness of the proposed method. On KITTI, DPA-I2P reduces RTE and RRE by 45.0% and 55.6% over the strongest implicit baseline, respectively. On nuScenes, DPA-I2P also improves registration accuracy over the evaluated baselines, suggesting better transferability to different driving scenes.

0.08

Learning Which Correspondences to Trust: Confidence-Weighted Event-Camera Localization in LiDAR Maps

cs.CV cs.RO ·2026-10-08 ·Panagiotis Kiousis, Kuangyi Chen, Jun Zhang, Friedrich Fraundorfer
code/data similarity 0.73
Abstract · 8 pages, 8 figures/tables. Submitted to IEEE ICRA 2027 (under review). Code: https://github.com/panagiotisq/CELL

Localizing an event camera against a pre-built LiDAR map can be cast as dense optical-flow estimation between a rendered depth view and an event image, followed by a Perspective-n-Point (PnP) solver over the induced 3D-2D correspondences. Existing pipelines rely on geometric consensus during pose estimation, but do not explicitly model the reliability or pose informativeness, i.e., how strongly a correspondence constrains the camera pose, of individual correspondences. We show that the natural way to learn it -- using the per-correspondence error to constrain the learning of confidence -- suffers from a depth-dependent bias: small pixel errors reside predominantly at large depths and do not lead to high pose informativeness. Instead, in our method (CELL), we learn a per-correspondence confidence end-to-end through the pose, using a differentiable probabilistic PnP whose log-partition term encourages weight configurations that yield a better-constrained pose distribution. The learned confidence is used in three ways: (i) it reweights the flow supervision in a decoupled training scheme that keeps pose gradients out of the flow/edge backbone; (ii) it drives a probabilistic correspondence selection at test time; and (iii) together with the network's edge-probability it weights a final edge-matching refinement. We further design a partial-completion depth representation that adds signal without hallucinating across large gaps. On M3ED and DSEC our full system improves over the LEAR baseline on the majority of the evaluated sequences: it reduces the median translation error by up to 26.9% and the median rotation error by up to 15.8%.

0.28

DRS-VPT: Directly Relocalizing in a Scan with Vision Point Transformers

cs.CV cs.RO ·2026-09-11 ·Lanke Frank Tarimo Fu, Maurice Fallon
top venue similarity 0.73
Abstract

We present DRS-VPT, a feed-forward transformer architecture for foundational image-to-scan registration. Given query images and a reference 3D point cloud, the model predicts the scan pose and point map alongside the poses and point maps of each camera, all expressed in the first camera's frame. It additionally predicts a coarse-to- fine pyramid of per-point and per-pixel features for direct reprojective alignment of the scan to the first image. This formulation unifies downstream tasks such as camera-LiDAR calibration in autonomous driving and indoor camera-to-map relocalization. A single DRS-VPT model achieves state-of-the-art performance for image-to-LiDAR registration in autonomous driving, competitive indoor relocalization without training map-specific weights, and strong zero-shot transfer to unseen environments. We also show qualitatively that the model learns complex scan-to-image projection properties such as occlusion of back-facing points.

0.39

TartanMatch: Towards Universal Dense Correspondence Across Modalities

cs.CV cs.LGcs.RO ·2026-10-10 ·Hyeokjoon Kwon, Jiting Cai, Ruogu Li, Kritan Bhandari, Geethika Hemkumar +5 more
code/data similarity 0.73
Abstract · Project page: https://tartanmatch.github.io/

Robotic platforms combine multi-modal sensors to operate across diverse conditions, but most dense correspondence methods are limited to RGB-RGB or a small set of modality pairs. Training a model for each modality pair scales poorly with the number of sensors and forgoes potential positive transfer across modality pairs. We introduce TartanMatch, a unified model for dense correspondence across all 25 ordered pairs among RGB, event, thermal, depth, and projected LiDAR. TartanMatch adapts an RGB-pretrained correspondence model to all modality pairs within one shared network using lightweight modality adaptation and a mixture of real and synthetic data. On zero-shot real-world benchmarks, TartanMatch reduces Endpoint Error (EPE) over the strongest baselines by 61.9% for cross-modal matching and 49.6% for same-modal matching. We further show that joint training across all modality pairs improves average matching accuracy over pair-specific training, especially on challenging cross-modal pairs. These results demonstrate that a single model achieves broad multi-modal coverage and state-of-the-art matching accuracy.

0.24

Adapting Monocular Depth Estimation in Novel Scenes through Disparity Refinement and Robot Ego-Motion

cs.RO cs.CV ·2026-11-11 ·Dimitrios Chatziparaschis, Georgios Georgakis, Adnan I. Ansar, Shehryar Khattak, Konstantinos Karydis
similarity 0.72
Abstract · 17 pages, 12 figures, journal

The geometric understanding of a scene is a crucial component for safe and efficient robotic operations in novel and unstructured environments. The recent emergence of foundation models for Monocular Depth Estimation (MDE) has provided an opportunity to enrich robotic perception capabilities with dense long-range depth predictions, replacing expensive onboard hardware (e.g., LiDARs and stereo cameras). However, these offline models are primarily trained on affine-invariant depth representations, and their generalization to novel scenes remains unclear. In this work we present EM-ViT, a monocular depth estimation model that learns to adapt online relative depth inputs from a foundation model prior to the metric scale with observations collected during robotic operations. Motivated by the stereo camera parameterization, our method decomposes depth prediction via dense disparity refinement to recover the scene's relative structure and an effective baseline scalar prediction to determine the missing metric scale. The learning process leverages sparse LiDAR points and, optionally, the robot's Ego-Motion (EM) to rapidly train a lightweight Vision Transformer (ViT), while an internal gradient matching loss preserves the fine-grained semantic structure of the input disparity in real-time. We demonstrate the efficacy of our method on publicly available sequences, such as KITTI, and show that our online learning pipeline can adapt to novel scenes faster and with higher accuracy than existing MDE foundation models. The code and supplementary materials will be publicly available at https://emvit-mde.github.io.

0.29

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.72
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22