CS Paper Radar

Does Online Gravity Estimation Matter? Revisiting a Silent Design Split in LiDAR-Inertial Odometry

Jie Xu, Ziyi Jin, Kangjin Yu, Can Jiang, Hongjun Huang, Tongxing Jin, Hongkun Luo, Zhongpu Xia

cs.RO ·submitted 2026-09-12 03:00 UTC · v3
code/data

Abstract

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

Comment
8 pages, 5 figures. Code, evidence, and video: https://github.com/jiejie567/rethink-lio-gravity

Closest papers

Nearest neighbours by meaning across the whole index.

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.69
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21

Pelorus: Resource-Aware Lidar-Inertial Odometry

cs.RO ·2026-11-17 ·Charlotte Sieh, Mario Porrmann
code/data similarity 0.67
Abstract

Lidar-inertial odometry (LIO) has an efficiency problem. High-resolution lidars produce millions of points per second that must be processed online on the resource-constrained hardware of robots, cars, or drones, yet most LIO methods neither bound their memory nor report their compute footprint. We introduce Pelorus, a resource-aware LIO with a fixed-capacity multiresolution map of voxelized normal distributions and an iterated equivariant state estimator. A relevance-based eviction keeps the map memory bounded, and a maturity-weighted map update suppresses inconsistent observations. The pipeline runs in parallel on CPUs and GPUs. On five sequences from three public datasets, Pelorus achieves the lowest relative pose error in seven of ten metrics with a small, bounded memory footprint and, with GPU offloading, the lowest CPU load of all compared methods. On an NVIDIA Jetson Orin NX, it processes a 128-beam lidar at 10 Hz. Pelorus is open source with CUDA, Vulkan, and Metal backends.

0.20

NM-LIO: Multiple LiDAR-Inertial Odometry Addressing LiDAR Measurement Noise Discrepancy

cs.RO ·2026-10-03 ·Gunhee Shin, Seungjae Lee, Minho Oh, Dongkyu Lee, Jaeyoung Lee +2 more
published similarity 0.67
Abstract · 10 pages, 3 figures, 1 table. Published in the International Conference on Robot Intelligence Technology and Applications (RiTA 2024)

Multiple LiDAR-inertial odometry methods have been widely applied in robotic applications owing to their enhanced accuracy and reliability. However, adopting multiple LiDAR systems can be challenging due to the discrepancies in measurement noise across different LiDARs. Existing methods have typically overlooked the noise discrepancies, which can significantly affect accuracy. In this paper, we propose Noise-aware Multiple LiDAR-Inertial Odometry (NM-LIO) that addresses the noise discrepancies. We integrate a noise model to quantify the measurement noise of each LiDAR. Additionally, we estimate the uncertainty of the residuals based on the measurement noise, allowing the measurement model to capture the noise discrepancies. Our proposed method is evaluated on a public multiple LiDAR dataset and compared with state-of-the-art methods. The experimental results demonstrate that the proposed method can accurately estimate the odometry in various environments by accounting for the noise discrepancies.

0.27

Auditing Targetless Camera-LiDAR Extrinsic Correction before Recursive Use

cs.CV ·2026-11-03 ·Bo Ma, Weiqi Yan
hot direction similarity 0.65
Abstract

Camera-LiDAR fusion repeatedly uses an extrinsic transform in projection, association, and recursive state estimation. We study whether a targetless correction should be admitted to a downstream consumer only after separate audits of correction quality, confidence ranking, and recursive risk. Our log-disjoint protocol evaluates these stages under synthetic extrinsic drift on Argoverse 2 and treats cross-dataset and odometry experiments as bounded diagnostics. On 27 test-split logs, single-frame Canny alignment is harmful in the mild tier. Multi-frame alignment improves severe-tier rotation by 2.52 degrees but worsens translation by 0.177 m; its declared joint error-magnitude improvement is also negative (-0.158, 95% CI [-0.223, -0.098]), so the rotation gain is not a six-degree-of-freedom correction success. A zero-injection check moves away from the true extrinsic, and solver-disagreement AUROC on selected splits does not yield a validated nonzero-coverage risk-coverage operating point. In a 15-log final system role, the locked conservative policy admits no candidate and equals Raw, whereas Always-correct increases trajectory error. These results support an auditable separation of correction, confidence, and recursive contamination; they do not establish a deployable calibration gate, positive odometry or SLAM improvement, map consistency, or closed-loop safety.

0.28

Dynamic-LIVO: A Dynamic-Aware LiDAR-Inertial-Visual Odometry System Using Spatio-Temporal Normals

cs.RO ·2026-09-16 ·Zhixin Zhang, Samuel Ahiwe, Matthew Hale, Liang Zhao, Pawel Ladosz
similarity 0.65
Abstract · 8 pages conference

This paper proposes Dynamic-LIVO, a dynamic-aware LiDAR-Inertial-Visual Odometry (LIVO) system for robust state estimation and static colored mapping in dynamic environments. Dynamic-LIVO employs Spatio-Temporal (S-T) normal analysis to identify dynamic LiDAR points and propagates the resulting classification to both LiDAR-inertial and visual-inertial updates, preventing dynamic LiDAR measurements and their associated visual observations from affecting state estimation and mapping. However, S-T normal estimation can be unreliable in newly observed and spatially sparse regions due to insufficient spatio-temporal observations. To address this issue, we introduce a time-delayed S-T normal estimation strategy that defers the classification of insufficiently constrained points and re-evaluates them as additional observations become available. This strategy improves dynamic classification reliability while preserving valid static points for map construction. Extensive experiments on public and self-collected datasets with diverse sensor configurations demonstrate that Dynamic-LIVO improves localization accuracy and produces cleaner static colored maps in challenging dynamic environments. The source code and self-collected dataset will be publicly released upon acceptance.

0.29

MOLA LiDAR-Inertial Odometry (MOLA-LIO) on the COMFORT Localization Benchmark

cs.RO ·2026-09-22 ·Jose Luis Blanco-Claraco
publishedbenchmark similarity 0.64
Abstract · 2 pages; IROS 2026 workshop

This short report documents our entry to the COMFORT Localization Benchmark (IROS 2026), evaluated on the GrandTour dataset recorded with the Boxi payload. It extends MOLA-LO into a LiDAR-inertial system that also ingests IMU and, optionally, legged kinematic odometry. We describe the architecture, the streams consumed, the local protocol that selected the submitted configuration, and the measurements backing our real-time claim.

0.34

Online Geometric Consistency Assessment of LiDAR Measurements via Recursive Bayesian Comparison

cs.RO eess.SY ·2026-11-07 ·Mingqiao Han, Qigeng Duan, Xuchen Liu, Jinqiang Cui, Xi Chen +1 more
similarity 0.64
Abstract

LiDAR-based localization and mapping systems produce registered point clouds that serve as geometric measurements for downstream estimation and navigation. Registration errors introduce duplicated surfaces and structural deformation into these measurements. In the absence of an independent reference, online assessment relies on geometry accumulated from earlier measurements. Such assessment requires tolerance to sampling variation and an accumulation process in which observations enter the history only after evaluation. We therefore formulate a recursive Bayesian comparison that couples geometric assessment with history maintenance. A Normal-Inverse-Wishart model represents historical voxel geometry and its uncertainty, while a weak isotropic reference adapts to current sampling. Comparing the marginal predictive support of the same current points under both models yields Normalized Drift Evidence (NDE). Assessment precedes assimilation: positive NDE triggers an alarm and preserves the preceding historical state; otherwise, the current observations update the history. Across 14 real-world sequences totaling approximately 73 min from four platform types, alarms identified all nine corrupted sequences and were absent from all five consistent sequences. In four representative scenarios with event references, first alarms occurred within 0.9 s of the reference times, with no preceding alarms. Cross-backend evaluation demonstrates consistent responses to reconstructed geometry. Ablation and controlled perturbation results establish the roles of uncertainty modeling, recursive history, displacement, and geometric support. Mean processing time is 4.2--6.1 ms per update at 1 Hz. In ten UAV trials, alarms initiated odometry isolation, landing, relocalization, and mission continuation.

0.27

LIN-SLAM: Lightweight LiDAR--Inertial Neural SLAM for Real-Time Onboard Navigation

cs.RO ·2026-10-15 ·Shiqi Che, Yijie Liu, Shuo Wang, Wenxin Liu
similarity 0.63
Abstract · 8 pages, 4 figures, submitted to Robotics and Automation Letters (RA-L)

Geometric light detection and ranging (LiDAR)--inertial simultaneous localization and mapping (SLAM) provides efficient state estimation but lacks the continuous map representation and global refinement capabilities of neural implicit SLAM, while neural implicit methods remain computationally expensive. We propose Lightweight LiDAR--Inertial Neural SLAM (LIN-SLAM), a hybrid method that couples high-rate geometric LiDAR--inertial estimation with neural implicit tracking, continual mapping, and global refinement for accurate real-time onboard SLAM. Experiments on twelve representative sequences from three datasets spanning 32-, 64-, and 128-channel LiDAR configurations show that LIN-SLAM achieves the lowest overall mean absolute trajectory error (ATE) among the evaluated state-of-the-art geometric and neural implicit methods, while substantially reducing runtime compared with existing neural implicit SLAM methods. On a Unitree Go2 equipped with an NVIDIA Jetson Orin NX and a 16-channel LiDAR, LIN-SLAM sustains real-time localization and neural mapping over a 1.47-km indoor trajectory through challenging repetitive corridor environments, with an endpoint closure error of only 0.141~m. To the best of our knowledge, LIN-SLAM is the first LiDAR--inertial SLAM system with a neural implicit backend to achieve real-time online operation on a mobile robotic platform while maintaining state-of-the-art localization accuracy. The code will be released upon acceptance.

0.17