CS Paper Radar

Online Geometric Consistency Assessment of LiDAR Measurements via Recursive Bayesian Comparison

Mingqiao Han, Qigeng Duan, Xuchen Liu, Jinqiang Cui, Xi Chen, Ben M. Chen

cs.RO eess.SY ·submitted 2026-11-07 08:14 UTC · v1

Abstract

LiDAR-based localization and mapping systems produce registered point clouds that serve as geometric measurements for downstream estimation and navigation. Registration errors introduce duplicated surfaces and structural deformation into these measurements. In the absence of an independent reference, online assessment relies on geometry accumulated from earlier measurements. Such assessment requires tolerance to sampling variation and an accumulation process in which observations enter the history only after evaluation. We therefore formulate a recursive Bayesian comparison that couples geometric assessment with history maintenance. A Normal-Inverse-Wishart model represents historical voxel geometry and its uncertainty, while a weak isotropic reference adapts to current sampling. Comparing the marginal predictive support of the same current points under both models yields Normalized Drift Evidence (NDE). Assessment precedes assimilation: positive NDE triggers an alarm and preserves the preceding historical state; otherwise, the current observations update the history. Across 14 real-world sequences totaling approximately 73 min from four platform types, alarms identified all nine corrupted sequences and were absent from all five consistent sequences. In four representative scenarios with event references, first alarms occurred within 0.9 s of the reference times, with no preceding alarms. Cross-backend evaluation demonstrates consistent responses to reconstructed geometry. Ablation and controlled perturbation results establish the roles of uncertainty modeling, recursive history, displacement, and geometric support. Mean processing time is 4.2--6.1 ms per update at 1 Hz. In ten UAV trials, alarms initiated odometry isolation, landing, relocalization, and mission continuation.

Closest papers

Nearest neighbours by meaning across the whole index.

SEAM: Submap-Anchored Evidence for Lifelong LiDAR Mapping under Trajectory Deformation

cs.RO ·2026-09-16 ·Kyuwon Kim
similarity 0.70
Abstract

We propose SEAM, a LiDAR-based lifelong mapping framework. Instead of relying on a single anchor spanning the entire session, SEAM generates evidence based on a trajectory optimized with submap-level anchors, and performs dynamic object removal and change detection. Through submap-level reprojection, the generated evidence remains usable even if the trajectory is subsequently modified by a new session, eliminating the need to recompute the entire process from scratch. SEAM suppresses geometrically unreliable inter-session loop edges using a DOP-based confidence measure. Suppressing unreliable loop edges prevents alignment errors. SEAM also uses a directional voxel-wise evidence model. The model accounts for occupancy patterns that vary with ray direction. Direction-aware evidence separates dynamic objects from environmental changes more precisely. Experiments on a real construction-site dataset and a long-term multi-session dataset show that SEAM achieves higher accuracy and faster processing than existing methods.

0.17

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.69
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35

Agreement Is Not Accuracy: LiDAR Elevation Errors Hidden in LiDAR-Camera Extrinsics

cs.CV ·2026-11-18 ·Yeon Kun Lee, Dongseok Yang, Deok-Kyeong Jang, Choongho Chung, Junyoung Lee +1 more
similarity 0.68
Abstract · 14 pages, 6 figures, including supplementary material

LiDAR and cameras provide complementary measurements for 3D vision, yet agreement between their observations does not establish the accuracy of either sensor's internal geometry. We show that systematic LiDAR elevation biases can be absorbed into the estimated extrinsics. Using synchronized LiDAR intensities and camera-estimated checkerboard poses, we jointly estimate a sensor-specific elevation correction shared across recordings and extrinsics for each recording. Ray-plane intersections locate the checker pattern without using reported ranges, preventing range errors from directly moving the lookup. Under matched intensity and correction models, this lookup gives smaller camera-consistency residuals than measured-point lookup. Across six identically designed rigs using the same sensor models, recording-excluded corrections reduce the mean translation-reference distance from 7.57 to 3.04 mm. On separate structures, they reduce inter-plane angle errors against references from independent dense camera scans and improve image-edge alignment. Rolling the rigs shifts the plane pairs exhibiting the largest angular improvements, as predicted for an elevation-only correction. Within the ray-plane model, calibration-target projections and loop-consistency residuals change little despite these geometric improvements. These findings show why agreement after extrinsic calibration need not establish correct internal LiDAR geometry. Synchronized observations of a familiar checkerboard provide a practical route to estimating and testing elevation corrections without a dedicated large calibration field. We plan to release code and data for reproducing the main results.

0.25

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

cs.RO ·2026-10-20 ·Xiangcheng Hu, Xieyuanli Chen, Feiyi Chen, Shengli Ren, Shiyang Chen +6 more
similarity 0.66
Abstract · 35 pages, 20 figures, 13 tables

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

0.22

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.66
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

Do LiDAR Language Models Really Understand Spatio-temporal Relationships?

cs.CV cs.AIcs.RO ·2026-09-21 ·Runyi Yang, Murat Akkoyun, Di Wen, Ruiping Liu, Yufan Chen +6 more
benchmarkcode/data similarity 0.65
Abstract

Recent 4D LiDAR language models aim to reason about objects and their evolving spatial relationships. Yet, in our evaluation, always selecting the same option nearly matches the multiple-choice accuracy of two B4DL-derived configurations. We introduce LiDAR-Hallu, a geometry-referenced benchmark and diagnostic protocol with 10,000 questions across 150 nuScenes scenes. It covers object existence, ego-relative position, distance ordering, relative motion, and temporal localization, with explicit rules for selecting objects, comparing times, and determining reference answers. Our protocol combines fixed-answer and candidate-content controls, cross-scene pairs with identical prompts but opposite reference answers, and relation-specific recall. Analysis of 100,000 recorded responses reveals failures hidden by aggregate accuracy. Candidate duration alone makes temporal answers predictable without observing LiDAR. On paired questions, the models frequently give the same answer to scenes requiring opposite answers. Relation-specific analysis further shows that both configurations miss every positive lateral-motion case across all tested conditions. Temporal-shuffle contrastive decoding provides little net improvement, as repairs are largely offset by new errors and the main failures persist. These results show that evaluating spatio-temporal reasoning requires testing whether models distinguish the queried physical relationships, rather than relying on individual-answer accuracy alone. The source code, checkpoints, and data are released at https://github.com/Awesome4D/4DMLLM_Hallucination_Bench.

0.36

When to Trust the BIM: Identifiability-Aware LiDAR-Inertial--BIM Fusion under As-Built Deviations

cs.RO ·2026-11-06 ·Yujie Zhang, Yuxuan Guo, Xinbao Sun, Chunlei Zhao, Langqi Miao +2 more
similarity 0.64
Abstract · 24 pages, 12 figures, 11 tables (including appendices)

Building information models (BIM) can provide a global geometric reference for robot localization with LiDAR-inertial odometry (LIO). However, as-built deviations from the as-designed model mean that a disagreement between a scan and the BIM may arise from a pose error, an offset wall surface (an as-built deviation or an unmodeled object in front of the wall), or a shifted room, and in some geometries these explanations produce identical observations. In this paper, we formalize this attribution problem as fault identification over three fault classes and derive a geometric criterion for when attribution is possible. Building on it, we propose an identifiability-aware method that reports an attribution only when the fault is attributable; otherwise, it retains the candidates, defers BIM updates and BIM-based pose corrections in the ambiguous directions, and recovers once new references arrive. In the pre-registered two-dimensional study, on cases whose fault is detectable but not attributable, the method's conditional error rate was 0.83%, against 31.67% for a baseline with uncertainty-based abstention at the same answer rate. On the 5,600 attributable cases, the method reported a unique attribution 5,574 times, with no incorrect attributions. In paired fault injections in a laboratory room with its IFC model and on three floors of the SLABIM dataset, it raised no off-target attribution (0 of 168 conditions in the laboratory; 0 of 1,302 on SLABIM) and attributed all eight laboratory faults predicted to be attributable, whereas both reproduced baselines raised off-target structural flags in every setting.

0.37

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.64
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21