CS Paper Radar

NM-LIO: Multiple LiDAR-Inertial Odometry Addressing LiDAR Measurement Noise Discrepancy

Gunhee Shin, Seungjae Lee, Minho Oh, Dongkyu Lee, Jaeyoung Lee, Youngwoo Seo, Hyun Myung

cs.RO ·submitted 2026-10-03 14:33 UTC · v1
published

Abstract

Multiple LiDAR-inertial odometry methods have been widely applied in robotic applications owing to their enhanced accuracy and reliability. However, adopting multiple LiDAR systems can be challenging due to the discrepancies in measurement noise across different LiDARs. Existing methods have typically overlooked the noise discrepancies, which can significantly affect accuracy. In this paper, we propose Noise-aware Multiple LiDAR-Inertial Odometry (NM-LIO) that addresses the noise discrepancies. We integrate a noise model to quantify the measurement noise of each LiDAR. Additionally, we estimate the uncertainty of the residuals based on the measurement noise, allowing the measurement model to capture the noise discrepancies. Our proposed method is evaluated on a public multiple LiDAR dataset and compared with state-of-the-art methods. The experimental results demonstrate that the proposed method can accurately estimate the odometry in various environments by accounting for the noise discrepancies.

Comment
10 pages, 3 figures, 1 table. Published in the International Conference on Robot Intelligence Technology and Applications (RiTA 2024)

Closest papers

Nearest neighbours by meaning across the whole index.

Resilient Decentralized Radar-LiDAR-Inertial Odometry in Challenging Subterranean Environments

cs.RO ·2026-10-23 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulos
similarity 0.69
Abstract

Accurate localization in GPS-denied and visually degraded environments affected by smoke, dust, or fog remains a critical challenge for autonomous systems. While LiDAR provides high-resolution spatial perception, its performance deteriorates under particulate occlusion. In contrast, frequency-modulated continuous-wave (FMCW) radar offers robustness under such conditions but suffers from sparse measurements and outliers. This article presents a resilient decentralized LiDAR Radar Inertial Odometry (LRIO) framework that fuses the complementary strengths of LiDAR, radar, and inertial sensing to achieve robust pose estimation in challenging subterranean environments. At the core of the framework is an Adaptive Residual Thresholding (ART) mechanism that autonomously detects temporal sensor degradation and selectively adjusts the fusion process to minimize unreliable measurements. Building on this, a Robust Error-Tolerant Optimal Information Filter (RETOIF) is employed within a decentralized fusion architecture to integrate LiDAR-inertial and multiple radar-inertial odometry estimates in a fault-aware manner, enhancing resilience to environmental disturbances and intermittent sensor failures. The proposed framework is evaluated using real-world sensor data collected in GPS-denied subterranean tunnels under smoke-free and smoke-degraded conditions. In the smoke-free experiment, the proposed RETOIF framework achieves a root mean square localization error (RMSE) of 2.1733, compared with 2.9929 for the conventional centralized LRIO approach, corresponding to a 27.4\% reduction in RMSE. Experimental results further demonstrate the framework's ability to maintain pose estimation under smoke-induced sensor degradation, highlighting its potential for resilient autonomous navigation and mapping in challenging subterranean environments.

0.05

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.69
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

When LiDAR Fades, Radar Takes Over: LiDAR Reliability-Aware Adaptive Localization Under Airborne Obscurants

cs.RO ·2026-10-09 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulo
similarity 0.68
Abstract

LiDAR-inertial odometry (LIO) is widely used for real-time localization and mapping, but its reliability can degrade substantially in subterranean environments affected by smoke, dust, and other airborne obscurants, whereas radar remains comparatively robust. This article presents a one-class temporal learning framework for LiDAR degradation detection and reliability-aware localization under such conditions. A broad set of degradation-sensitive cues, including spatial, cross-modal, geometric/motion, intensity, and measurement-recency features, is evaluated to characterize changes in LiDAR sensing quality. Their temporal evolution is modelled over sliding windows using an LSTM autoencoder trained exclusively on nominal operation, enabling deviations from healthy sensor behaviour to be detected without requiring labelled degradation data. The resulting LiDAR reliability estimate governs adaptive selection between LIO and radar inertial odometry (RIO), retaining LIO during reliable sensing and transferring localization authority to RIO when degradation is detected. The framework is evaluated using real-world ground robot data collected in GNSS-denied subterranean tunnels under nominal and dense-smoke conditions. Experimental results demonstrate degradation detection, adaptive modality switching, and continued localization output under severe LiDAR degradation. A feature family ablation study further shows that a reduced feature representation can improve degradation-aware localization performance in the evaluated dense-smoke scenarios, highlighting the importance of feature parsimony in one-class sensor degradation detection. The code will be released as open source to support reproducibility and further research.

0.19

Dynamic-LIVO: A Dynamic-Aware LiDAR-Inertial-Visual Odometry System Using Spatio-Temporal Normals

cs.RO ·2026-09-16 ·Zhixin Zhang, Samuel Ahiwe, Matthew Hale, Liang Zhao, Pawel Ladosz
similarity 0.67
Abstract · 8 pages conference

This paper proposes Dynamic-LIVO, a dynamic-aware LiDAR-Inertial-Visual Odometry (LIVO) system for robust state estimation and static colored mapping in dynamic environments. Dynamic-LIVO employs Spatio-Temporal (S-T) normal analysis to identify dynamic LiDAR points and propagates the resulting classification to both LiDAR-inertial and visual-inertial updates, preventing dynamic LiDAR measurements and their associated visual observations from affecting state estimation and mapping. However, S-T normal estimation can be unreliable in newly observed and spatially sparse regions due to insufficient spatio-temporal observations. To address this issue, we introduce a time-delayed S-T normal estimation strategy that defers the classification of insufficiently constrained points and re-evaluates them as additional observations become available. This strategy improves dynamic classification reliability while preserving valid static points for map construction. Extensive experiments on public and self-collected datasets with diverse sensor configurations demonstrate that Dynamic-LIVO improves localization accuracy and produces cleaner static colored maps in challenging dynamic environments. The source code and self-collected dataset will be publicly released upon acceptance.

0.29

Does Online Gravity Estimation Matter? Revisiting a Silent Design Split in LiDAR-Inertial Odometry

cs.RO ·2026-09-12 ·Jie Xu, Ziyi Jin, Kangjin Yu, Can Jiang, Hongjun Huang +3 more
code/data similarity 0.67
Abstract · 8 pages, 5 figures. Code, evidence, and video: https://github.com/jiejie567/rethink-lio-gravity

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

0.47

F-LIVO: A Feature-Level Geometric Measurement Framework for LiDAR-Inertial-Visual Odometry

cs.RO ·2026-10-16 ·Xinye Dai, Yapeng Wang, Shujie Zhou, Zihao Wang, Shiqi Zheng +4 more
code/data similarity 0.67
Abstract · 19 pages, 20 figures

Measurement-level LiDAR-Inertial-Visual Odometry (LIVO) can achieve high accuracy, and its practical resource requirements depend on the adopted association and map-maintenance strategy. Persistently attaching dense photometric patches or appearance attributes to mapped LiDAR points can introduce additional storage, association, and update costs. This paper presents F-LIVO, a filter-based LIVO framework that couples a visual-inertial subsystem and a LiDAR-inertial subsystem through feature-level point-to-plane constraints between visual points and LiDAR planes. To preserve cross-modal coupling when visual triangulation is weak, we further recover visual feature depth from the LiDAR map through local plane fitting and ray-plane intersection. In the LiDAR update, the covariance of each point-to-plane residual is adaptively scaled according to local planar reliability, thereby reducing overconfident updates on poorly conditioned surfaces. Because the proposed method relies on sparse geometric features rather than persistent dense photometric map attributes, it retains a compact map representation. Experiments on multiple public datasets show competitive, sequence-dependent accuracy. Across the evaluated degradation cases, F-LIVO maintains continuous estimation with comparatively low accumulated end-to-end drift. Under the evaluated resource configuration, it achieves the lowest mean and peak central processing unit (CPU) usage, the lowest peak resident set size (RSS), and the lowest RSS growth rate among the evaluated implementations, while R2LIVE retains a lower mean RSS. The source code will be made publicly available upon acceptance to facilitate reproducible research.

0.21

Real-Time Ground Normal Vector Estimation for Spherical Mobile 3D Mapping using LiDAR-Inertial Odometry

cs.RO ·2026-10-20 ·Tim Schubert, Fabian Arzberger, Andreas Nüchter
top venue similarity 0.67
Abstract · Proceedings of the International Symposium on Artificial Intelligence, Robotics and Automation in Space (i-SAIRAS 26)

Accurate ground plane normal estimation is essential for odometry in spherical mobile mapping systems (SMMS), which face challenges from rapid rotations and limited ground coverage. We propose two RANSAC-based approaches: single-scan estimation with normal vector scoring and multi-step validation, and LiDAR-inertial odometry (LIO)-based estimation using a global 3D map. Evaluated across diverse real-world datasets against terrestrial laser scanner ground truth, results show that LIO-based estimation significantly outperforms single-scan methods in accuracy and robustness. Integrating ground normal estimates into the motion model improves pose estimation, supporting autonomous navigation in challenging and hazardous environments.

0.25

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.66
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21