CS Paper Radar

Interpolation Conditions for Instant Data Consistency with Port-Hamiltonian Structure

Martina Vanelli, Nima Monshizadeh, Julien M. Hendrickx

eess.SY math.OC ·submitted 2026-08-31 17:01 UTC · v1

Abstract

We develop a data-driven framework for nonlinear port-Hamiltonian (pH) systems based on interpolation conditions to characterize consistency between observed data and structured dynamical models. Specifically, we derive necessary and sufficient conditions for the existence of a pH system with a smooth (convex) Hamiltonian instantly consistent with a given dataset, without requiring explicit parametrization. We further provide a semidefinite programming formulation to verify consistency with non-degenerate interconnection and dissipation structures. Our results provide a principled approach to assess instant data consistency with physical structure and pave the way for control design directly from data.

Comment
8 pages, 2 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Driven Hamiltonian Under Parametric Uncertainty

eess.SY ·2026-11-19 ·Zach Liu, Namhoon Cho, Jason J. Choi
similarity 0.60
Abstract

Hamilton--Jacobi (HJ) reachability computes the states from which a system can be kept out of an unsafe region, but it requires knowledge of dynamics. The data-driven Hamiltonian (DDH), under a black-box dynamics setting, lower bounds the Hamiltonian directly from trajectory data, which produces a guaranteed conservative safe set. However, it needs a Lipschitz constant of the dynamics, and its bound loosens with the distance from the data. We consider dynamics that are linear in unknown parameters through a known feature vector, with a Gaussian prior on the parameters, and use this structure to construct a parametric DDH. From a few short trajectories with noisy velocity measurements, the parametric DDH lower-bounds the Hamiltonian at all states and costates with a probability of at least $1-δ$. The safe set obtained by replacing the Hamiltonian with this bound is then contained in the true safe set with the same probability. For control-affine systems, evaluating the bound amounts to a second-order cone program, so it can be solved efficiently within existing grid-based and neural PDE solvers. We demonstrate the approach on a two-state system and a six-state lunar lander.

0.21

Data-Driven Hamiltonian for Neural Optimal Control

eess.SY ·2026-10-26 ·Christopher A. Strong, Aswin Surya, Namhoon Cho, Jason J. Choi, Claire J. Tomlin
benchmark similarity 0.58
Abstract · 21 pages, 9 figures

Reinforcement learning (RL) has emerged as a prominent data-driven approach to optimal control, but often requires substantial amounts of data and provides limited guarantees when encountering out-of-distribution state-action pairs. In this paper, we propose an alternative approach grounded in the well-established Hamilton-Jacobi framework in optimal control theory. Rather than requiring an explicit analytical model of the system dynamics to evaluate the Hamiltonian, we replace this with a data-driven Hamiltonian (DDH), which we generalize to a broad class of optimal control problems. In contrast to standard RL approaches, the DDH provides a principled mechanism, requiring only minimal prior system information such as a Lipschitz constant, for quantifying and accounting for uncertainty in regions not covered by the data, enabling the derivation of controllers with performance guarantees. Additional prior system knowledge, when available, can be readily incorporated to improve performance. For high-dimensional systems, we further introduce a physics-informed neural approximation of the value function, trained using a novel procedure that generates worst-case fictitious rollouts evaluated through the DDH. On an LQR problem, the DDH reaches near-optimal cost on every dataset we test, including random data on which offline RL methods remain far from optimal, and needs far fewer samples than online RL. On a nonlinear lunar lander benchmark, the DDH achieves an optimality gap to a trajectory-optimization reference more than $3\times$ smaller than CQL and FQL, and matches the performance of SAC with approximately $37\times$ fewer samples. These results establish the DDH as a promising framework for data-driven optimal control, particularly in settings where available data are limited in quantity or quality.

0.33

Direct and Indirect Data-Driven Control with Prior Information about the Equilibrium Manifold

eess.SY ·2026-09-24 ·Yi-Chun Liao, Valentina Breschi, Marco M. Nicotra
published similarity 0.56
Abstract · Accepted at the 65th IEEE Conference on Decision and Control (CDC 2026)

By hinging on the assumption that a system to be controlled is fully unknown, many data-driven control approaches do not leverage available or readily inferable priors. In contrast to this viewpoint, this paper analyzes the impact of using the system's equilibrium subspace to inform direct and indirect linear quadratic regulation. For the indirect case, we show how including a constraint on the equilibrium subspace in the identification problem changes the statistical properties of the learned model. In particular, we show that enforcing consistency with respect to the equilibrium subspace leads to a reduction in the estimator variance that, in turn, enhances model-based control performance. In the direct case, we show how this prior can be leveraged to gain insight into the controlled system without requiring an explicit identification step. These results are supported by both numerical and experimental evidence, showcasing the advantages of explicitly leveraging the equilibrium manifold as a prior in data-driven control.

0.25

Port-Hamiltonian Koopman Operator Synthesis for Mechanical Systems

cs.RO eess.SY ·2026-09-15 ·Rajpal Singh, Aditya Singh, Jishnu Keshavan
similarity 0.54
Abstract

Finite-dimensional Koopman models enable efficient linear prediction and control of nonlinear robotic systems. However, models learned purely from trajectory data may violate the energetic structure of the underlying mechanics, producing predictions that exhibit artificial energy growth and diverge under recursive propagation. This work presents a structure-preserving Koopman framework for Euler-Lagrange systems built on generalized-momentum coordinates. The momentum transformation exposes the mechanical actuation as a known, state-independent port, which is preserved explicitly in the lifted dynamics. A structure-constrained neural architecture is developed to jointly learn the lifting functions and a port-Hamiltonian Koopman generator, rendering the learned dynamics passive by construction rather than through penalty terms or post-hoc projection. A Cayley-midpoint discretization further preserves the corresponding storage-dissipation balance exactly in discrete time. These properties are established analytically by deriving the discrete storage balance and associated stability guarantees of the learned predictor. Simulation and experimental studies demonstrate improved prediction accuracy, data efficiency, and closed-loop tracking over Koopman baselines, with increasing gains for higher-dimensional systems.

0.23

Matched Disturbance Rejection for Port-Hamiltonian Systems with Coupled Dynamics

eess.SY ·2026-08-11 ·M. Reza J. Harandi
similarity 0.54
Abstract

This paper investigates the rejection of matched disturbances generated by coupled port-Hamiltonian (PH) dynamics in previously stabilized PH systems. The disturbance dynamics are incorporated into a unified PH representation, allowing the disturbance to affect the plant through both the matched input channel and an interconnection structure. Unlike existing results that typically impose restrictive structures on the disturbance dynamics, the proposed framework accommodates a more general class of coupled PH disturbances, including nonzero interconnection and damping terms. A baseline disturbance rejection scheme is first established for known disturbance storage parameters. The framework is then extended to the case of an unknown symmetric storage matrix through online parameter estimation. Two control designs are developed under different structural conditions, with the latter relaxing the dimensional restriction imposed by the first design. The proposed methods guarantee asymptotic convergence of the plant state to the desired equilibrium, while preserving a port-Hamiltonian representation of the closed-loop dynamics under the corresponding conditions. The results generalize existing disturbance rejection approaches and broaden their applicability to coupled PH disturbance models.

0.04

Structure-Aware Spatial Kernels for Gaussian Process Distributed Port-Hamiltonian Systems

cs.LG ·2026-10-15 ·Tianyi Yang, Thomas Beckers
code/dataunusual similarity 0.54
Abstract · 8 pages, 2 figures. Code and reproduction scripts are available at https://github.com/Wilson-hacker/Softrod_PIML_Project

Gaussian process distributed port-Hamiltonian systems (GP-dPHS) enable data-driven modeling of distributed dynamical systems while preserving their physical structure. However, standard stationary kernels can be inefficient for spatially heterogeneous systems because they neither exploit known input invariances nor reflect structured spatial dependencies. We address this limitation with a structure-aware kernel design that removes irrelevant state coordinates and decouples state and spatial dependencies through a tensor-product covariance. This modular construction allows qualitative knowledge of spatial heterogeneity to be incorporated by selecting an appropriate spatial kernel without requiring an analytical description of the underlying profile. Numerical experiments on a nonlinear string with periodic, smoothly varying, and semi-piecewise stiffness profiles demonstrate that structural decoupling consistently improves reconstruction accuracy, while profile-matched spatial kernels yield substantially larger gains in force-field and trajectory reconstruction.

0.37

Petrov-Galerkin operator inference with application to stability-encouraging identification

eess.SY math.OC ·2026-10-01 ·Johannes Rettberg, Jonas Nicodemus, Harsh Sharma, Boris Kramer, Jörg Fehr +1 more
benchmark similarity 0.54
Abstract

Data-driven model order reduction methods such as operator inference enable the efficient construction of reduced-order models directly from high-dimensional time-domain data. Standard operator inference typically seeks a Galerkin-type reduced model in a prescribed low-dimensional subspace by identifying its reduced operators from projected snapshot data. The resulting inference problem is formulated as a least-squares problem admitting an efficient closed-form solution. However, it is well known from intrusive model order reduction for linear time-invariant systems that Petrov-Galerkin projections can additionally preserve important system properties such as stability and passivity. To overcome the limitations of standard operator inference, we extend the framework for linear time-invariant systems to incorporate Petrov-Galerkin projections and provide explicit error expressions and bounds between the intrusive and nonintrusive reduced operators, thus generalizing results from the literature. We demonstrate the proposed approach in the context of dissipative and port-Hamiltonian systems. Furthermore, we introduce a novel convex optimization formulation that explicitly enforces the port-Hamiltonian structure on the inferred operators. The effectiveness of the proposed methods is demonstrated on several well-established benchmark problems, including the CD player, an atmospheric model, a mass-spring-damper system, and a poroelasticity system.

0.46

Comparing model representations and fitting methods for port-Hamiltonian system identification

eess.SY cs.LG ·2026-11-03 ·Sølve Eidnes, Håkon Noren Myhr
similarity 0.54
Abstract · 6 pages, 3 figures; submitted to the invited session "Learning and identification of port-Hamiltonian systems" at the 21st IFAC Symposium on…

Port-Hamiltonian models describe physical systems by separating stored energy, dissipation and external inputs. Learning such models from data requires a choice of representation and fitting method. We compare using neural networks, analytic expressions and combinations of the two for representing the different components of the port-Hamiltonian system, and compare fitting the models with gradient-based optimisation or sparse regression. Testing on simulations of mechanical and electrical systems, with and without added noise, we present prediction accuracy and computational cost of the different approaches.

0.30