CS Paper Radar

Petrov-Galerkin operator inference with application to stability-encouraging identification

Johannes Rettberg, Jonas Nicodemus, Harsh Sharma, Boris Kramer, Jörg Fehr, Benjamin Unger

eess.SY math.OC ·submitted 2026-10-01 08:30 UTC · v1
benchmark

Abstract

Data-driven model order reduction methods such as operator inference enable the efficient construction of reduced-order models directly from high-dimensional time-domain data. Standard operator inference typically seeks a Galerkin-type reduced model in a prescribed low-dimensional subspace by identifying its reduced operators from projected snapshot data. The resulting inference problem is formulated as a least-squares problem admitting an efficient closed-form solution. However, it is well known from intrusive model order reduction for linear time-invariant systems that Petrov-Galerkin projections can additionally preserve important system properties such as stability and passivity. To overcome the limitations of standard operator inference, we extend the framework for linear time-invariant systems to incorporate Petrov-Galerkin projections and provide explicit error expressions and bounds between the intrusive and nonintrusive reduced operators, thus generalizing results from the literature. We demonstrate the proposed approach in the context of dissipative and port-Hamiltonian systems. Furthermore, we introduce a novel convex optimization formulation that explicitly enforces the port-Hamiltonian structure on the inferred operators. The effectiveness of the proposed methods is demonstrated on several well-established benchmark problems, including the CD player, an atmospheric model, a mass-spring-damper system, and a poroelasticity system.

Closest papers

Nearest neighbours by meaning across the whole index.

The Snapping Phenomenon and Boundary Enforcement in Model Reduction: Mechanisms and Mitigation

cs.CE ·2026-10-15 ·Charbel Farhat, Yihong Zhu, Faisal As'ad, Tommaso Taddei
similarity 0.57
Abstract · 29 pages, 13 figures

Projection-based model order reduction mitigates the computational cost of high-fidelity parametric simulations but can suffer from the "snapping phenomenon", whereby a projection-based reduced-order model (PROM) rigidly latches onto a training snapshot, impairing parametric interpolation. Standard methods also struggle to enforce parameter-dependent boundary conditions without costly constraints or penalty schemes. This work proposes a tripartite taxonomy of snapping, distinguishing intrinsic, extrinsic, and numerical mechanisms. Focusing on intrinsic and numerical snapping, we introduce a unified framework based on a parameter-dependent shift vector. By embedding spatial transport into the state ansatz, the method enforces boundary conditions exactly, restores continuous parametric sensitivity, and eliminates snapshot latching in affine and regression-augmented PROMs without increasing online complexity. We establish the framework's mathematical foundations in the linear regime, showing how it overcomes test-space orthogonality blind spots. In nonlinear computational fluid dynamics, we identify the roles of boundary conditions, mesh grading, and discrete equation scaling in numerical snapping. We also show that formulation-toggling is an unreliable heuristic that can compromise near-field accuracy. Finally, we develop a field-theoretic realization using a spatially varying shift vector governed by a scaled Laplace equation. The approach is validated on structural and aerodynamic benchmarks, including viscous flow around a NACA airfoil and a three-dimensional NASA Common Research Model.

0.22

POD-CNF: reduced order modeling of parametrized stochastic PDEs via normalizing flows and proper orthogonal decomposition

cs.LG math.NA ·2026-11-02 ·Andrea Violante, Nicola Rares Franco, Andrea Manzoni
similarity 0.57
Abstract

Reduced-order models (ROMs) learned from trusted numerical simulations enable the real-time simulation of complex physical systems, making computationally prohibitive tasks-such as uncertainty quantification and optimal control-tractable. In particular, data-driven ROMs are opening the opportunity to learn from both numerical simulations and experimental data. However, integrating these sources of information is far from straightforward. Real-world measurements often involve multiple sources of uncertainty, including non-Gaussian noise, latent heterogeneities, unknown or hidden system parameters, and multiscale phenomena occurring below the resolution of the data. Consequently, real-world data are better described by parametrized stochastic partial differential equations, for which the development of effective ROMs remains relatively unexplored. In this work, we introduce POD-CNF, a data-driven generative ROM for efficient uncertainty quantification of parametrized high-dimensional systems. The approach combines projection-based model reduction and deep generative modeling. First, Proper Orthogonal Decomposition (POD) is employed to obtain a low-dimensional representation of the solution manifold. A Conditional Normalizing Flow (CNF) is then trained to approximate the density of the reduced coefficients conditionally on the input parameters. This formulation allows the surrogate to capture complex, multimodal output distributions, going beyond standard regression-based ROMs and least-squares predictions. We assess the effectiveness of POD-CNF through numerical experiments, demonstrating its ability to accurately reproduce output distributions while substantially reducing computational costs. Finally, a proof-of-concept application illustrates how the generative paradigm facilitates integration into Bayesian inverse problems, highlighting promising directions for future research.

0.27

Multifidelity Operator Inference for Dynamical Systems

cs.CE stat.MLcs.LGmath.NA ·2026-11-12 ·Vignesh Sella, Anirban Chaudhuri, Karen Willcox
similarity 0.56
Abstract · 19 pages, AIAA SciTech Forum 2027 (Uncertainty Quantification Conference)

This paper presents a multifidelity (MF) formulation of Operator Inference (OpInf) for learning non-intrusive, physics-based reduced-order models (ROMs) of nonlinear dynamical systems. OpInf learns reduced operators from projections of snapshot data by solving a least squares regression problem. However, generating high-fidelity snapshots can be computationally expensive, limiting parameter coverage and the temporal extent of training trajectories for many aerospace applications, which can lead to inaccurate or unstable ROM predictions. This work proposes MF-OpInf, which combines limited high-fidelity snapshots with more plentiful low-fidelity snapshots through a control-variates-inspired MF least squares formulation to learn a single set of reduced operators across multiple trajectories. Low-fidelity trajectories provide additional parameter coverage and extend beyond the high-fidelity training time horizon. The low-fidelity snapshots are also used to construct an improved reduced basis through weighted proper orthogonal decomposition. We demonstrate MF-OpInf on a nonlinear reaction-diffusion problem with parametrized sinusoidal forcing and a two-dimensional incompressible flow past a cylinder with a parametrized inlet pulse. In these experiments, under an equal training simulation budget, MF-OpInf reduces the mean relative prediction error at unseen parameters by up to $87\%$ for the reaction-diffusion problem and $28\%$ for the cylinder flow problem over the test time regime, which extends beyond the high-fidelity training time horizon. These results demonstrate that MF-OpInf can improve temporal extrapolation and prediction at unseen parameters without increasing the training simulation budget.

0.15

SMORE: Stability-Promoting Mesh-Agnostic Model Reduction for Time-Dependent PDEs

cs.LG cs.AI ·2026-09-27 ·Yangyuan Li, Weichao Li, Shaowu Pan
similarity 0.56
Abstract · 52 pages

High-fidelity simulations of time-dependent partial differential equations (PDEs) are computationally expensive, motivating data-driven reduced-order surrogates for many-query tasks such as uncertainty quantification, design optimization, data assimilation, and optimal control. However, existing surrogate models often exhibit poor temporal stability, which can lead to unstable rollouts and exploding gradients during backpropagation, especially in multistep long-horizon forecasting. To address this, we propose SMORE, a mesh-agnostic framework for model order reduction of time-dependent PDEs. Its latent dynamics are trained with Lyapunov-guided stability regularization, which promotes stable long-horizon rollouts. We provide theoretical guarantees under the stated structural assumptions. Beyond forecasting PDE evolution, the learned latent dynamics, which are interpretable and linear or linear-quadratic, could bring benefits for downstream tasks such as data assimilation and optimal control. Moreover, our framework is capable of predicting continuous PDE solution fields from sparse measurements of the initial condition. We evaluate SMORE on a range of problems, including wave propagation, the Navier-Stokes equations, and the shallow water equations. Our results show that it improves long-horizon rollout generalization and empirical robustness, and achieves competitive accuracy at comparable parameter budgets relative to competitive baselines including DINo, FNO, CNO, and Transolver.

0.45

Meshless Latent Dynamics Models for Model Order Reduction of time-dependent Partial Differential Equations

cs.LG math.NA ·2026-10-29 ·Lorenzo Tomada, Federico Pichi, Gianluigi Rozza
theory similarity 0.54
Abstract

Latent dynamics learning has emerged as a prominent approach for Model Order Reduction (MOR) of time-dependent, parameterized Partial Differential Equations (PDEs). Traditional autoencoder-based approaches are intrinsically tied to fixed spatial discretizations during both training and inference, motivating the development of meshless methodologies. In this context, conditioning provides a natural mechanism for representing temporal evolution through spatially continuous functions, enabling mesh-agnostic Latent Dynamics Models (LDMs). In this work, we introduce a unified mathematical framework for mesh-agnostic LDMs based on conditioning in Neural Fields (NeFs). Leveraging a taxonomy of conditioning mechanisms (weak, strong, and pure), we formulate meshless LDMs as NeFs conditioned on a latent state. We establish a Universal Approximation Theorem (UAT) for this class of models and analyze their stability by deriving Lipschitz bounds for different conditioning mechanisms. Our analysis reveals an expressivity--stability trade-off, providing insight into why more expressive conditioning, despite its higher representational capacity, can potentially degrade performance during temporal extrapolation. Finally, we provide a comprehensive comparison of meshless and mesh-based architectures in the continuous limit of the spatial discretization, showing that meshless models guarantee grid-independent Lipschitz bounds, unlike mesh-based counterparts. Our experiments across Burgers' equation, Navier--Stokes flow past a cylinder, and linear advection show that meshless LDMs can achieve predictive accuracy comparable to or better than their mesh-based counterparts while using only 2% of the trainable parameters and exhibiting nearly constant error across spatial discretizations.

0.11

Online adaptive non-intrusive model reduction via manifold interpolation and subspace updates: application to FSI convergence acceleration

cs.CE math.NA ·2026-09-15 ·Azzeddine Tiba, Florian de Vuyst, Iraj Mortazavi
similarity 0.54
Abstract

We introduce a novel online adaptive non-intrusive reduced-order modeling strategy for parameterized dynamical systems involving parameter and time-dependent reduced bases. The proposed framework is based on a unified Grassmann manifold formulation combining three key components: interpolation of local reduced subspaces for unseen parameters, geodesic online subspace updates driven by incoming high-fidelity snapshots, and a latent-space regression strategy relying on Grassmann-distance weighting and Procrustes alignment to consistently aggregate predictions from multiple local models. The adaptive reduced-order model is embedded in a partitioned fluid-structure interaction framework, where it predicts fluid interface forces to provide accurate initial guesses for the nonlinear coupling iterations, thus achieving computational speedups with no loss of accuracy. The reduced basis and the regression operators are adapted independently during the simulation and without requiring the storage of high-dimensional streaming data, preserving computational efficiency while substantially improving predictive capabilities. Numerical results on reference FSI test cases demonstrate superior accuracy with respect to static and global reduced-order models, leading to a significant reduction in the number of fixed-point iterations required for convergence. The proposed framework offers a flexible and fully non-intrusive approach for the efficient simulation of nonlinear parameter-dependent multiphysics problems.

0.23

Interpolation Conditions for Instant Data Consistency with Port-Hamiltonian Structure

eess.SY math.OC ·2026-08-31 ·Martina Vanelli, Nima Monshizadeh, Julien M. Hendrickx
similarity 0.54
Abstract · 8 pages, 2 figures

We develop a data-driven framework for nonlinear port-Hamiltonian (pH) systems based on interpolation conditions to characterize consistency between observed data and structured dynamical models. Specifically, we derive necessary and sufficient conditions for the existence of a pH system with a smooth (convex) Hamiltonian instantly consistent with a given dataset, without requiring explicit parametrization. We further provide a semidefinite programming formulation to verify consistency with non-degenerate interconnection and dissipation structures. Our results provide a principled approach to assess instant data consistency with physical structure and pave the way for control design directly from data.

0.27

Efficient Projection-Based Reduced-Order Modeling for Computational Fluid Dynamics via Multifidelity Basis Construction

cs.CE ·2026-11-04 ·Ashok Viswanathan, Charbel Farhat
similarity 0.54
Abstract · 18 pages conference

Projection-based reduced-order models (PROMs) accelerate computational fluid dynamics simulations, but generating high-fidelity (HF) training snapshots remains expensive. We present a multifidelity methodology that reduces offline basis-construction costs by combining a small HF database with low-fidelity (LF) solutions. The method accommodates discrepancies in physical models and spatial discretizations. Parameter-matched HF and aligned LF snapshots define a correction basis. At new parameters, LF predictions are corrected by minimizing the HF residual over an affine trial space, with selective Reynolds-averaged Navier-Stokes (RANS) smoothing. Accepted snapshots enrich the training database and update the correction basis. The resulting basis is compatible with conventional projection methods, including least-squares Petrov-Galerkin projection. For steady flow over a NACA0012 airfoil, using fine-grid RANS and coarse-grid Euler models, four HF snapshots and 36 LF-derived snapshots reduce snapshot-generation cost by a factor of 7.8. At basis dimension 40, mean lift, drag, and lift-to-drag ratio errors are 1.1%, 3.6%, and 3.9%, and the mean relative skin-friction error is approximately 5%, compared with 0.18%, 2.9%, 2.8%, and 4% for an HF-only PROM. Errors are evaluated against fully converged HF solutions on a test set emphasizing shock-containing flows. Increasing the initial HF snapshot count raises cost without monotonically improving accuracy. Among the tested multifidelity configurations, ten initial HF snapshots give the lowest aerodynamic errors at dimension 40; increasing the count to twelve worsens all three. The results demonstrate reduced snapshot-generation costs while retaining compatibility with established PROM formulations.

0.32