CS Paper Radar

Cyber-Physical Digital Factory Architecture as the Enabler of Disembodied Work

Tero Kaarlela, Ivan Ruchkin, Jose Outeiro, Souradeep Dutta

cs.HC ·submitted 2026-08-31 18:12 UTC · v1

Abstract

Digital Twins (DTs), Artificial Intelligence (AI), and Industrial Internet of Things (IIoT) technologies have significantly advanced manufacturing digitalization. However, these technologies are typically applied to individual manufacturing processes rather than integrated into a unified cyber-physical manufacturing environment. This paper proposes a cyber-physical digital factory architecture that enables disembodied work, where manufacturing systems can be supervised and operated remotely through eXtended Reality (XR) user interfaces in collaboration between AI-based control and human operators. The architecture integrates synchronized DTs, hierarchical cloud-edge AI, IIoT, and XR teleoperation interfaces into a cyber-physical manufacturing environment. The proposed approach is validated through representative manufacturing operations, including CNC machining, robotic-assisted abrasive finishing, and robotized disassembly. The results demonstrate the feasibility of the proposed architecture for disembodied manufacturing work and provide a reusable cyber-physical framework for future human-AI-controlled digital factories.

Closest papers

Nearest neighbours by meaning across the whole index.

A Cyber-Physical Machine Tool Framework with a Real-Time Machining Process Digital Twin

cs.HC ·2026-08-30 ·Khalil Chakal, Tero Kaarlela, Jose Outeiro, Carlos Andrade
similarity 0.73
Abstract

Digital Twins (DTs) have emerged as a key technology for improving the monitoring, optimization, and automation of manufacturing systems. However, existing Cyber-Physical Machine Tool (CPMT) implementations primarily represent the machine tool, while the machining process remains only partially synchronized with its physical counterpart. This paper extends a previously presented CPMT framework by introducing a hierarchical DT framework that simultaneously maintains DTs of both the machine tool and the machining process. The proposed framework integrates real-time CNC operational data, a voxel-based workpiece representation, synchronized process vibration measurements, and a persistent part DT repository for process replay, traceability, and future synthetic data generation. Experimental evaluation demonstrated real-time operation at a 20 Hz machining-state update rate, interactive visualization exceeding 100 frames per second, and a mean depth reconstruction error of 0.16 mm. The implementation provides a foundation for AI-assisted machining applications while preserving the machine tool monitoring and teleoperation capabilities.

0.23

Location-Independent Robot-Assisted Finishing Using Digital Twins and Extended Reality

cs.HC ·2026-09-08 ·Jose Outeiro, Jia Holt, Tero Kaarlela, Khalil Chakal
similarity 0.72
Abstract · 6 pages, 5 figures, 2027 IEEE/SICE International Symposium on System Integration

This paper presents a cyber-physical system (CPS) for location-independent programming, supervision, training, and teleoperation of a Robot-Assisted Finishing (RAF) system used to post-process metal additive-manufactured (AM) components. A digital twin (DT) built in Unity is delivered to the operator as a WebGL application that supports both desktop and immersive modes through WebXR-compatible devices. Moreover, it exchanges robot state and pose commands with a collaborative robot through a Message Queuing Telemetry Transport (MQTT) broker. The DT enforces kinematic and collision constraints before a pose is released to the physical robot, and augments the virtual component with a color map of the surface topography that supports operator decisions on part repositioning or process termination. The architecture was validated on a specially designed physical RAF system. A steady-state joint synchronization error of 0.12 deg and a mean round-trip latency of 563 ms were measured, which is adequate for supervisory programming and intermittent teleoperation.

0.20

Physical AI: Concepts, Techniques, and Challenges

cs.AI cs.RO ·2026-10-19 ·Weinan Zhang, Chunhua Shen, Tianfan Xue, Bin Zhao, Bingqi Jiang +47 more
similarity 0.63
Abstract · Monograph, 12 chapters, 388 pages, 64 figures

In recent years, physical artificial intelligence (physical AI) has experienced rapid development, capturing significant attention in academia and industry. However, the field has yet to reach consensus on its definition, technical landscape, and core challenges. To address this gap, this monograph seeks to define physical AI, present its technical landscape, and examine each key technical subfield in depth. In doing so, it establishes a unified framework for Physical AI: artificial systems that perceive, model, and act upon the physical world through continuous feedback under real-world constraints. Further, this monograph distinguishes physical AI from conventional digital AI, embodied AI, cyber-physical systems, and digital twins. It develops the foundations of physical AI across physics, control, cognition, learning, and reasoning. It reviews key methodologies, including multimodal perception, physical data and simulation, world models, embodied foundation models, motor-control systems, multi-agent coordination, and hardware-software co-design. Furthermore, it examines applications spanning robotics, manufacturing, infrastructure, scientific experimentation, and autonomous services. Particular attention is given to sim-to-real transfer, reliability, real-time execution, evaluation, safety, governance, and long-term deployment. By connecting perception, prediction, decision-making, action, and adaptation in a closed loop, this monograph identifies the technical challenges and research directions required to advance from narrow automation toward more generalizable physical AI and, ultimately, physical artificial general intelligence (Physical AGI).

0.20

A Modular Dual-Arm Robotic Cell for Disassembly and Repair of Industrial Control Electronics

cs.RO ·2026-09-23 ·Maximilian Ruhe, Fabian Harlacher, Christian Friedrich, Martin Kipfmueller
similarity 0.61
Abstract

Industrial control electronics such as programmable logic controllers, servo drives and operator panels are routinely repaired in plant maintenance, but were never designed for automated disassembly. This paper presents a modular dual-arm robotic cell for repair-oriented disassembly, using two collaborative manipulators, interchangeable tools, red-green-blue-depth (RGB-D) and wristlevel perception, force/torque sensing and a Robot Operating System (ROS) 2- based control with Behavior Tree (BT) execution, teleoperation, digital-twin support and bounded learning-based contact skills. The process is decomposed into sequence planning, symbolic execution with fallbacks, force-limited tool skills, visual condition assessment and demonstration-based adaptation. A CADderived device graph encodes the disassembly order, access constraints, tools, feasible removal directions and verification states and converts them into operation objects for the BT and motion layers. Grounded in three representative devices, the cell covers screw removal, damaged-fastener fallback, snap-fit opening, connector release, cooperative printed circuit board (PCB) extraction and condition-based repair decisions. The main contribution is an architecture linking sequence knowledge, perception, verification and force-aware skills through one ROS 2 interface across simulation, teleoperation and real hardware.

0.29

AI-Driven Collaborative Assembly Line Inspection: System Integration and Deployment Challenges

cs.RO cs.CVcs.HC ·2026-09-27 ·Asya Ünal, Amr Okasha, Ege Çırakman, Perin Ünal
published similarity 0.60
Abstract · 13 pages, 4 figures, 2 tables. Accepted at the 22nd International Conference on Mobile Web and Intelligent Information Systems (MobiWIS 2026…

Manual visual inspection on assembly lines is a persistent manufacturing bottleneck: operator fatigue over extended shifts lowers defect-detection rates. This paper presents the design, integration, and field deployment of an AI-assisted collaborative inspection cell at the Silverline kitchen-appliance factory, developed within the AI-PRISM project. The cell couples a Universal Robots UR 10e cobot carrying a machine-vision defect-detection pipeline with a Comau Racer-5 cobot for functional tests, coordinated through ROS 2 Humble on an Ubuntu 22.04 LTS server. Multi-modal data (Basler camera imagery, TIA microphone acoustics, and SPS electrical-safety measurements) are logged locally and visualised in real time with Grafana. We report the practical deployment challenges (close-proximity safety, AI robustness under glare and reflections, ROS 2 namespace collisions across two cobots, and operating-system and dependency issues) together with the engineering solutions adopted, and structure the integration through a four-level Human-Robot Interaction analysis. The deployed cell cuts per-unit quality-check time from 82 s to 61 s (about 25%), raises final-control resource efficiency from 0.75 to 0.88, reduces operator visual-inspection viewing time by 82%, and significantly lowers operator mental demand (p = 0.005, NASA-TLX).

0.30

From AI-assisted to AI-native Industrial Control: Architecture, Agent Design, and Challenges

eess.SY physics.soc-ph ·2026-10-26 ·Lisi Liu, Bin Wang, Quan Tang, Chuan Pang, Feng Gao +1 more
similarity 0.59
Abstract

The integration of AI and industrial control is rapidly transforming industrial automation. However, current approaches remain predominantly AI-assisted, where AI functions are incorporated as auxiliary components without fundamentally altering the underlying architecture of industrial control systems. Consequently, the potential of AI to enable higher levels of autonomy, adaptability, and continuous evolution remains underutilized. This paper proposes an AI-native industrial control paradigm, which reconceptualizes industrial control systems by positioning AI as the intrinsic core rather than an external enhancement. The proposed paradigm is built upon an AI-native infrastructure and a collection of collaborative agentic AIs, each encapsulating a set of advanced skills. Among them, the industrial control agent plays a central role in orchestrating the system lifecycle. Through this paradigm, industrial control shifts from a closed, capability-oriented, human-driven, and passive engineering process to an open, task-oriented, intent-driven, and autonomous solution delivery mechanism. The paper further analyzes the key challenges of the AI-native paradigm from both AI and industrial control perspectives, including issues related to AI model reliability, formal verification, real-time assurance, and heterogeneous resource orchestration. Overall, this work outlines a forward-looking vision for industrial control in the AI era and identifies critical research directions toward autonomous, evolvable, and adaptive control systems in complex and dynamic industrial environments.

0.19

Operational digital twin clinics enable task-based evaluation of embodied AI

cs.RO cs.AI ·2026-08-12 ·Xinyuan Wu, Jingrao Zhang, Mengdi Xu, Henry K. Chu, Mingguang He +1 more
similarity 0.58
Abstract

Embodied artificial intelligence (AI) must be tested in the clinical environments where it will operate, but building realistic, robot-testable settings is costly and difficult to scale. Here we show that routine clinic images can be transformed into operational digital twins for task-based evaluation of embodied AI. Using 39 ophthalmic clinic scenes, we converted single photographs into editable, simulator-ready environments and assessed reconstruction quality, room-scale geometry, mesh grounding, multi-robot feasibility, perturbation sensitivity and closed-loop policy performance. The reconstructed scenes preserved workspace structure, while local editing enabled controlled device reconfiguration. Device meshes, collision proxies and semantic anchors converted visual reconstructions into contact-aware simulation scenes. Across three robot embodiments, shared task targets showed different patterns of reachability and contact feasibility. Small device translations and rotations produced task-specific changes in contact margins that were not captured by visual similarity alone. Digital-twin trajectories also supported local policy learning and closed-loop evaluation. These findings establish operational validity as a key principle for clinical digital twins and provide an intermediate layer between offline development and physical deployment of embodied AI in healthcare.

0.04

Agentic AI-enabled Semantic Commissioning of a Cognitive Digital Twin for Reconfigurable Manufacturing

cs.RO cs.MA ·2026-09-08 ·Yangyang Liu, Xun Xu, Jan Polzer
published similarity 0.58
Abstract

Rapid bespoke commissioning of the Cognitive Digital Twin (CDT) is a major challenge in reconfigurable manufacturing. Traditional digital twin (DT) construction methods primarily focus on geometric reconstruction, often neglecting the deep semantic integration and functional interoperability necessary for autonomous reasoning. This paper proposes an agent-based, AI-driven workflow to automate end-to-end CDT debugging. The system utilises LangGraph as a multi-agent orchestration engine to achieve dual-path synthesis: the semantic path extracts technical specifications from unstructured documents using Retrieval Augmented Generation (RAG), while the functional path autonomously discovers and binds to real-time industrial telemetry data using Model Context Protocol (MCP). Experimental validation in a robotic machining cell demonstrates that the system achieves a mean average accuracy (mAP) of 97.2% in perception and reduces the deployment cycle from several weeks to an average of 2 hours, marking a paradigm shift from manual scripting to autonomous orchestration.

0.27