CS Paper Radar

A Modular Dual-Arm Robotic Cell for Disassembly and Repair of Industrial Control Electronics

Maximilian Ruhe, Fabian Harlacher, Christian Friedrich, Martin Kipfmueller

cs.RO ·submitted 2026-09-23 07:29 UTC · v1

Abstract

Industrial control electronics such as programmable logic controllers, servo drives and operator panels are routinely repaired in plant maintenance, but were never designed for automated disassembly. This paper presents a modular dual-arm robotic cell for repair-oriented disassembly, using two collaborative manipulators, interchangeable tools, red-green-blue-depth (RGB-D) and wristlevel perception, force/torque sensing and a Robot Operating System (ROS) 2- based control with Behavior Tree (BT) execution, teleoperation, digital-twin support and bounded learning-based contact skills. The process is decomposed into sequence planning, symbolic execution with fallbacks, force-limited tool skills, visual condition assessment and demonstration-based adaptation. A CADderived device graph encodes the disassembly order, access constraints, tools, feasible removal directions and verification states and converts them into operation objects for the BT and motion layers. Grounded in three representative devices, the cell covers screw removal, damaged-fastener fallback, snap-fit opening, connector release, cooperative printed circuit board (PCB) extraction and condition-based repair decisions. The main contribution is an architecture linking sequence knowledge, perception, verification and force-aware skills through one ROS 2 interface across simulation, teleoperation and real hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

SwapBot: Tool-Centric Robot Manipulation via Interchangeable End-Effectors and Tactile Sensing

cs.RO ·2026-10-29 ·Yunchu Zhang, Ray Song, Junhan Jiao, Liyiming Ke, Yuchen Yang +4 more
similarity 0.64
Abstract

Robot manipulation in everyday environments inherently involves substantial tool usage. Seemingly simple household tasks, such as cooking pan-fried tofu, require forceful cutting, delicate brushing, and precise placement using different tools under contact-rich interaction. Thus, the ability to autonomously swap and use task-appropriate tools is important for tool-centric manipulation. We introduce SwapBot, a modular, tool-centric end effector system featuring low-cost adapters that quickly convert common household tools into robot end effectors. Rather than pursuing a single universal gripper, SwapBot adopts a unified design principle that combines a fixed robot-side coupling interface with low-cost, tool-side adapters, enabling compatibility with diverse tools, including articulated ones, and multiple robot platforms. Each adapter integrates compact tactile sensors, supports fast autonomous swapping, and interfaces with an intuitive teleoperation system for efficient demonstration collection. User studies show that, during teleoperation, SwapBot reduces task completion time and operator workload. Using collected demonstrations on the robot, we train imitation learning policies to successfully perform tool-centric tasks like cooking tofu, stirring salad, flipping meat. Our ablation study shows that using tactile-augmented demonstrations improves policy performance across contact-rich skills, increasing success rates by 15 to 25 percentage points over RGB-only policies. These results highlight modular, tactile-equipped tools as a practical and extensible pathway toward robust and capable robot manipulation. Project website https://personalrobotics.github.io/SwapBot.

0.29

RoboSpan: Learning Modular Coordination Policies for High-DoF Whole-Body Mobile Manipulation with Teleoperation

cs.RO ·2026-10-14 ·Keqiang Ren, Xuecheng Ye, Hanyu Liu, Zhihua Wang, Tao Jian +4 more
similarity 0.63
Abstract

Whole-body mobile manipulation suffers from two fundamental challenges: inherent motion heterogeneity across locomotion, arm, and hand modules, and progressive error accumulation over long-horizon multi-stage tasks. Existing teleoperation platforms also lack integrated dexterous tactile sensing to support coordinated whole-body decision-making. This paper presents RoboSpan, a high-DoF whole-body teleoperation and demonstration platform, and the Hierarchical Modular Framework (HMF) for learning modular coordination policies. HMF functionally decouples the 29-DoF action space into fine hand manipulation, arm pose adjustment, and mobile-base spatial configuration branches, and introduces the Coordinated Modular Embodied Transformer (COMET) with inter-modular cross-attention to enable dynamic information exchange and action coordination. Vision-language model driven hierarchical task decomposition structurally suppresses temporal error propagation, while a full-palm 2D tactile representation encodes distributed contact signals for cross-module tactile empowerment. Experiments on a physical 29-DoF robot demonstrate that the proposed method achieves over 20\% higher task success rate than mainstream baselines across a range of long-horizon whole-body tasks, markedly improving stability and robustness in contact-rich manipulation.

0.16

LocoPilot: Single-Operator Bilateral Teleoperation for Loco-Manipulation Policy Learning

cs.RO ·2026-10-20 ·Antonio Langella, Giovanni Minelli, Giovanni B. Dessy, Lorenzo Amatucci, Giulio Turrisi +2 more
code/data similarity 0.61
Abstract

Learning loco-manipulation policies requires demonstrations that capture coordinated base and arm motion on the target embodiment. Robot-free interfaces allow demonstrations to be collected independently of the target robot, increasing flexibility but without directly capturing platform-specific commands, proprioception, and body-mounted observations. On-robot teleoperation allows to capture these signals directly, but requires an interface capable of commanding the complete system concurrently. This paper presents LocoPilot, a single-operator bilateral teleoperation and data-collection framework implemented on a 12-DoF Unitree Go2 quadruped equipped with a 6-DoF AgileX Piper L manipulator, an Intel RealSense D435 wrist camera, and an Intel RealSense D405 head camera. A second 6-DoF Piper L arm, used as the leader and two handheld controllers provide simultaneous control of the base, body posture, manipulator, and gripper. The follower arm interaction forces are estimated without a dedicated force/torque sensor and rendered to the operator through a passivity-constrained haptic channel. A ROS~2 pipeline records synchronized multimodal observations together with a unified 11D action shared by teleoperation and policy deployment. Compared to prior work, LocoPilot uniquely unifies robot-in-the-loop legged data collection, force feedback without motion-capture instrumentation, and the same action interface at deployment. We evaluate the interface across multiple loco-manipulation tasks and validate the complete collection-to-deployment pipeline by fine-tuning MolmoAct2 \cite{MOLMO} on pick-and-place demonstrations and deploying on the physical robot without action retargeting or additional inverse kinematics. Code available at: https://github.com/iit-DLSLab/LocoPilot

0.21

Cyber-Physical Digital Factory Architecture as the Enabler of Disembodied Work

cs.HC ·2026-08-31 ·Tero Kaarlela, Ivan Ruchkin, Jose Outeiro, Souradeep Dutta
similarity 0.61
Abstract

Digital Twins (DTs), Artificial Intelligence (AI), and Industrial Internet of Things (IIoT) technologies have significantly advanced manufacturing digitalization. However, these technologies are typically applied to individual manufacturing processes rather than integrated into a unified cyber-physical manufacturing environment. This paper proposes a cyber-physical digital factory architecture that enables disembodied work, where manufacturing systems can be supervised and operated remotely through eXtended Reality (XR) user interfaces in collaboration between AI-based control and human operators. The architecture integrates synchronized DTs, hierarchical cloud-edge AI, IIoT, and XR teleoperation interfaces into a cyber-physical manufacturing environment. The proposed approach is validated through representative manufacturing operations, including CNC machining, robotic-assisted abrasive finishing, and robotized disassembly. The results demonstrate the feasibility of the proposed architecture for disembodied manufacturing work and provide a reusable cyber-physical framework for future human-AI-controlled digital factories.

0.06

BrickCraft-Duo: Efficient Dual-Arm Skill Learning and Refinement for Compositional Long-Horizon Assembly

cs.RO ·2026-09-23 ·Jichuan Yu, Zhenyu Xiao, Ze Wang, Ruixuan Liu, Changliu Liu +1 more
similarity 0.61
Abstract

Interlocking brick assembly provides a representative testbed for evaluating real-world robotic manipulation capabilities, where diverse structural designs, complex inter-step dependencies, intricate mechanical interactions and tight insertion tolerances pose substantial challenges. We present BrickCraft-Duo, a modular framework for long-horizon dual-arm collaborative assembly of interlocking bricks through data-efficient skill learning and composition. BrickCraft-Duo learns reusable single- and dual-arm assembly skills from diverse demonstrations, with bilateral symmetry alignment facilitating skill sharing across symmetric arms and assembly--support role assignments. Guided by stability-aware assembly reasoning, BrickCraft-Duo composes heterogeneous skills to achieve autonomous long-horizon execution, and further integrates human-in-the-loop correction for targeted skill refinement. The resulting system achieves long-horizon success rates of at least 60% and step-level completion rates of at least 95% across five real-world assembly tasks involving partially supported configurations, with horizons of up to nine steps. Project website: https://jichuan-yu.github.io/BrickCraft-Duo.

0.35

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.60
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

cs.RO cs.LG ·2026-09-01 ·Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang +4 more
code/data similarity 0.60
Abstract · Project page: https://pine-lab-ntu.github.io/facet-0/

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

0.51

PRISM: Precision and contact-rich Real-world Industrial Skill dataset with Multimodal sensing

cs.RO ·2026-08-18 ·Tengbo Yu, Jiahao Wu, Hanning Wang, Rui Chen, Chuanhou Liu +2 more
benchmarkdatasetcode/data similarity 0.60
Abstract

Recent progress in robotic learning has been fueled by large-scale datasets collected in everyday environments. However, most existing datasets emphasize short-horizon, low-contact tasks such as pick-and-place, and therefore do not capture the precision control, force/torque or tactile regulation, and multimodal feedback required for industrial assembly. To address this gap, we introduce PRISM, a large-scale multimodal dataset for contact-rich industrial operations. The dataset spans more than 25 manipulation tasks (e.g., electronic components plug/unplug, conveyor-based sorting) and covers diverse mechanical constraints. PRISM includes more than 5,000 trajectories totaling 45 hours of teleoperated demonstrations, recorded using synchronized multi-view RGB-D, force/torque, tactile, and robot-state measurements. In contrast to datasets collected in household or laboratory settings, PRISM provides a realistic benchmark for multimodal perception and control under high-precision industrial constraints, and serves as a foundation for contact-rich, generalizable manipulation in real-world manufacturing environments. The dataset is open-sourced at: https://tengbo-yu.github.io/PRISM/

0.33