CS Paper Radar

Behavior--Realization Separation for Constrained Physical Human--Robot Interaction

Yongyan Cao

cs.RO eess.SY ·submitted 2026-09-01 03:46 UTC · v1

Abstract

Physical human--robot interaction software often couples desired-behavior specification with constrained realization; we treat these as separate layers. A \emph{behavior layer} supplies a desired contact-port acceleration $a_k^{\mathrm{id}}=f_θ(e_k,\dot e_k,F_{h,k})$. A \emph{realization layer} converts it into constrained robot commands and reports total desired-versus-realized acceleration error instead of hiding it in saturation. A same-objective unconstrained counterfactual separates regularization from constraint intervention, while plant data expose model error. This paper implements a receding-horizon quadratic program realizing memoryless affine behaviors. Changing the behavior modifies objective coefficients through $(C_θ,G_θ)$ while the robot-command variable and feasible set remain unchanged. A planar study instantiates impedance and admittance; the same running layer accepts an impedance--admittance--impedance reassignment without reconstruction, under its existing rate limit. On a torque-controlled 7-DOF Franka FR3 in MuJoCo, the runtime freezes task-space dynamics per solve and enforces torque feasibility across its horizon. Under a sustained 20~N push, it holds a slack-relaxed workspace boundary to within approximately 0.1--0.2~mm, versus 4.4~cm (impedance) and 4.7~cm (admittance) overshoot from instantaneous clipping. A derated actuator budget then activates the torque constraint: horizon-wide enforcement keeps its frozen-model plan feasible to $2.1\times10^{-4}$~N$\cdot$m, whereas a first-step-only ablation plans up to 11.329~N$\cdot$m beyond budget; on the executed nonlinear plant, where both share the same local-model error, the gap is smaller but still favors horizon-wide enforcement (0.161 vs.\ 0.380~N$\cdot$m). These results are a focused proof of behavior--realization separation.

Closest papers

Nearest neighbours by meaning across the whole index.

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.65
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18

Constraint-Grounded Reinforcement Learning for Variable Impedance Control in Contact-Rich Robotic Insertion

cs.RO ·2026-09-11 ·Lin He, Min Deng
similarity 0.63
Abstract · 16 pages, 7 figures

In robotic insertion under uncertain contact, the axial force limit and the appropriate controller gain vary across tasks. As a result, a single fixed gain is unlikely to remain suitable across different task conditions, making conventional impedance controllers reliant on manual retuning. To eliminate manual retuning, we propose Constraint-Grounded Reinforcement Learning (CG-RL), a variable impedance framework for online gain adaptation. Conditioned on the force limit and contact feedback, the policy outputs a residual motion, an insertion rate, and a requested gain. The controller projects this gain into the admissible range without exposing the range itself to the policy. This separation allows a single policy to operate under different force limits without retraining or manual retuning. We evaluate CG-RL on simulated oblique insertion across five training seeds. CG-RL achieves an $85.8\pm7.7\%$ (mean $\pm$ SD) success rate of insertions without violating the force limit, while keeping the applied gain within the admissible range. As a comparison, a fixed-gain baseline using the midpoint gain achieves a success rate of $50.1\%$. The policy adapts its insertion rate continuously to the specified force limit and further generalizes to more permissive force limits above the training range. In contrast, the same actor without force-limit input does not exhibit this adaptation. The applied gain is guaranteed to remain within the admissible range, while force-limit satisfaction is validated empirically rather than guaranteed formally.

0.53

Manifold Generative Annealing for Contact Constraint-aware Impedance Control with Reinforcement Learning Prior

cs.RO ·2026-10-15 ·Zhilin He, Guoquan Qi, Changliu Liu
similarity 0.62
Abstract

Contact-rich robotic tasks require coordinated motion and impedance under uncertain interaction dynamics and physical constraints. While recent methods on learned policies provide useful interaction strategies, they may fail when contact conditions differ from those encountered during training. Model-based generative methods show promising receding-horizon trajectories optimization results, but often lack structured behavioral guidance and refinement that jointly accounts for constraint geometry and actual contact responses. To this end, we propose Manifold Generative Annealing (MGA), a joint model-free and model-based generative framework for motion--impedance optimization. MGA first organizes pretrained reinforcement learning policies into structured sequence proposals, retaining task-specific interaction strategies without committing to their execution. It then evaluates these proposals alongside exploratory samples through model-based rollouts for refinement or separate execution selection. Crucially, realization-aware manifold refinement aligns updates from the refinement bank with both task constraints and locally achievable physical responses, allowing learned experience to guide online adaptation under changing contact conditions. Experiments cover surface scanning, peg insertion, and humanoid pushing, with improved safety success rate of impedance control under nominal and sensing-shift conditions.

0.14

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.61
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

KPI: A Promptable Kernel for Physical Interaction on Humanoids

cs.RO ·2026-09-28 ·Yikai Wang, Honghao Zhu, Xiao Hu, Hao Zhang, Zelin Wang +3 more
similarity 0.60
Abstract · Project website: https://kpi-robot.github.io/

Humanoids now walk, balance and reach with remarkable generality: one whole-body tracking policy follows references from a human, or from an end-to-end policy. That generality travels in the trajectory, and a trajectory alone carries limited information about the interaction it should produce: at contact, the executing controller determines how the robot behaves. Single-task policies usually reach hard interactions by optimising trajectory and controller together in simulation; general stacks usually assume a preset or hand-chosen controller. We present KPI, a promptable kernel for physical interaction between the trajectory source and an unmodified whole-body tracker. Instead of a controller fixed before the task, the trajectory source sends a contract: per direction, track, comply, or hold a force range. From tracking error and a wrench estimate, the kernel adapts the arms' stiffness, damping, reference and feedforward toward it at contact rate. We demonstrate KPI through an agentic framework: from one instruction, a vision-language agent writes both the reference trajectory and the contract, with no task-specific code. We demonstrate instruction-driven winch operation, door opening, and box transport, alongside scripted surface-interaction experiments. In the winch demonstration, the humanoid is able to turn a crank to hoist a second robot fully off the ground.

0.26

ElastiQP: An Always-Feasible QP Solver for Constrained Robot Control

cs.RO math.OC ·2026-09-16 ·Daniel Morton, Jon Arrizabalaga, Zachary Manchester, Marco Pavone
code/datahot direction similarity 0.60
Abstract

As robot capabilities increase, quadratic programming (QP)-based controllers must account for a similarly increasing number of constraints to ensure safe, reliable operation. Yet, with each added constraint, this introduces more chances of momentary conflict: in which case, a QP solver that returns an "infeasible" status leaves the controller with nothing to execute. To address this, we introduce ElastiQP, a modified dual active-set QP solver that relaxes every inequality constraint with an exact, per-constraint l1 penalty while keeping equality constraints (dynamics) hard. Notably, ElastiQP does so by folding the slack variables into the solver analytically, maintaining a constant size of the condensed linear system. On a suite of robot control benchmarks, ElastiQP achieves microsecond-level performance, matching or outperforming leading modern solvers on feasible problems. On infeasible problems, ElastiQP handles these gracefully, confining violations to strictly the conflicting inequality terms, returning a usable solution up to 40x faster than the best alternative solvers. ElastiQP is available as an open-source C++ header-only library, with Python and JAX interfaces, at https://github.com/StanfordASL/elastiqp.

0.64

Composable Dynamics for Cooperative Humanoids: A RoboCompiler Extension

cs.RO ·2026-10-09 ·Mehdi Heydari Shahna, Jouni Mattila
similarity 0.60
Abstract

Physically connected humanoids need consistent dynamics for internal actuator loops, inter-robot forces, and changing ground supports. We extend RoboCompiler with member-wise dynamics assembly, compiling reduced dynamics from rigid bodies, moving actuator parts, and reflected rotor inertias. Compiled body Jacobians and analytic constraint curvature yield an explicit Coriolis factor satisfying the power identity for floating-base quasi-velocities. A two-level reduction retains reusable robot models while composing their supports and hand connections; local inertial updates have rank at most six, and prescribed-acceleration constraint wrenches are affine in actuator efforts. These interfaces support actuator-aware tracking, coupled force allocation, payload updates, and support-mode switching for five hand-linked humanoids. Across 264 feasible states in eight humanoid configurations, normalised acceleration discrepancies remain within $1.6\!\times\!10^{-10}$ against a hard-constraint reference and $1.4\!\times\!10^{-10}$ against a compiler-independent reference; MuJoCo simulations achieve 0.73~mm root-mean-square (RMS) pelvis error in the ring dance and complete side steps through 20 support-mode changes.

0.29

PAKT: Physically-Aligned Kinesthetic Teaching for Reinforcement Learning

cs.RO ·2026-09-22 ·Lars Johannsmeier, Yashraj Narang
similarity 0.60
Abstract · 17 pages, 6 figures, 9 tables, Conference on Robot Learning

Real-world reinforcement learning (RL) systems still struggle with the demands of contact-rich industrial manipulation, including micrometer-level precision, success rates above 99%, and human-level cycle times. Although off-policy algorithms can improve performance by leveraging demonstrations and interventions, a key bottleneck is the lack of an intuitive interface for collecting such guidance while complying with constraints of the physical system and the policy. We propose PAKT, a framework for kinesthetic teaching in RL. As opposed to teleoperation approaches, PAKT relies on kinesthetic guidance, which is widely used in industry. However, a critical weakness of kinesthetic guidance is the possibility for the operator to move the robot along trajectories (e.g., velocities, accelerations, jerk) that the robot and/or policy cannot physically reproduce. Using PAKT, operators guide the robot through admittance control, which maps human-applied forces to motion. The downstream reference generator applies the same kinematic limits used during policy execution, keeping the collected trajectories within these limits. To support this teaching interface with an appropriate execution layer, PAKT adds a high-performance control stack that maps low-frequency RL actions to high-frequency torque commands. It consists of a reference generator and subsequent impedance controller, where the reference generator preserves the tracking performance of the impedance controller while improving contact handling and producing smoother policy actions. Across the reported runs on four insertion and industrial assembly benchmarks, including a data center compute tray, the end-to-end system reduces cycle time by 23%-48% and cumulative intervention count by 62%-86% relative to the HIL-SERL baseline. Project website: https://pakt-website.github.io/pakt-website}{https://pakt-website.github.io/pakt-website

0.37