CS Paper Radar

Constraint-Grounded Reinforcement Learning for Variable Impedance Control in Contact-Rich Robotic Insertion

Lin He, Min Deng

cs.RO ·submitted 2026-09-11 20:36 UTC · v1

Abstract

In robotic insertion under uncertain contact, the axial force limit and the appropriate controller gain vary across tasks. As a result, a single fixed gain is unlikely to remain suitable across different task conditions, making conventional impedance controllers reliant on manual retuning. To eliminate manual retuning, we propose Constraint-Grounded Reinforcement Learning (CG-RL), a variable impedance framework for online gain adaptation. Conditioned on the force limit and contact feedback, the policy outputs a residual motion, an insertion rate, and a requested gain. The controller projects this gain into the admissible range without exposing the range itself to the policy. This separation allows a single policy to operate under different force limits without retraining or manual retuning. We evaluate CG-RL on simulated oblique insertion across five training seeds. CG-RL achieves an $85.8\pm7.7\%$ (mean $\pm$ SD) success rate of insertions without violating the force limit, while keeping the applied gain within the admissible range. As a comparison, a fixed-gain baseline using the midpoint gain achieves a success rate of $50.1\%$. The policy adapts its insertion rate continuously to the specified force limit and further generalizes to more permissive force limits above the training range. In contrast, the same actor without force-limit input does not exhibit this adaptation. The applied gain is guaranteed to remain within the admissible range, while force-limit satisfaction is validated empirically rather than guaranteed formally.

Comment
16 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Potential-Field Action Representation for Reinforcement Learning in Contact-Rich Manipulation

cs.RO cs.AI ·2026-09-18 ·Xinyu Liu, Gökhan Solak, Arash Ajoudani
similarity 0.76
Abstract

Model-free reinforcement learning can acquire contact-rich robotic manipulation skills through trial-and-error interaction, but it often requires the policy to learn both task strategy and low-level motion generation. In this setting, the action representation is critical because it determines how policy outputs are converted into robot motion, shaping both exploration and physical execution. Direct Cartesian command interfaces require the policy to generate motion at every decision step, coupling task-level adaptation with continuous low-level control and increasing the learning burden. We propose PA-RL, a reinforcement-learning framework that uses artificial potential fields as the action representation. Instead of commanding motion directly, the policy adapts the parameters of an energy-like potential field, which generates a state-dependent guidance direction executed through a Cartesian impedance controller. We evaluate PA-RL on peg-in-hole insertion, a representative contact-rich task with nonlinear dynamics and discontinuous contact transitions. In simulation, PA-RL is compared with Cartesian velocity, Cartesian pose, and variable-impedance action spaces using the same RL algorithm. PA-RL is the only method to reach a 100% evaluation success rate within the allotted training time, while the best baseline reaches 92.6%. It also reduces joint-torque variation by 55.4% and Cartesian acceleration variation by 70.8% relative to the best baseline, without explicit motion-quality penalties in the reward. The simulation-trained policy further completes 9/9 real-robot insertions without fine-tuning, demonstrating the deployment feasibility of the learned potential-field interface.

0.22

Manifold Generative Annealing for Contact Constraint-aware Impedance Control with Reinforcement Learning Prior

cs.RO ·2026-10-15 ·Zhilin He, Guoquan Qi, Changliu Liu
similarity 0.73
Abstract

Contact-rich robotic tasks require coordinated motion and impedance under uncertain interaction dynamics and physical constraints. While recent methods on learned policies provide useful interaction strategies, they may fail when contact conditions differ from those encountered during training. Model-based generative methods show promising receding-horizon trajectories optimization results, but often lack structured behavioral guidance and refinement that jointly accounts for constraint geometry and actual contact responses. To this end, we propose Manifold Generative Annealing (MGA), a joint model-free and model-based generative framework for motion--impedance optimization. MGA first organizes pretrained reinforcement learning policies into structured sequence proposals, retaining task-specific interaction strategies without committing to their execution. It then evaluates these proposals alongside exploratory samples through model-based rollouts for refinement or separate execution selection. Crucially, realization-aware manifold refinement aligns updates from the refinement bank with both task constraints and locally achievable physical responses, allowing learned experience to guide online adaptation under changing contact conditions. Experiments cover surface scanning, peg insertion, and humanoid pushing, with improved safety success rate of impedance control under nominal and sensing-shift conditions.

0.14

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.71
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

Hybrid Residual Reinforcement Learning for Contact-Rich Robotic Book Insertion

cs.RO ·2026-09-17 ·Tianyuan Liu, Rutherford Agbeshi Patamia, Benjamin Champion, Akansel Cosgun, Richard Dazeley
similarity 0.70
Abstract · 8 pages, 8figures

Placing a grasped book into a tight shelf is a compact but difficult contact-rich control problem: millimetre-scale pose error can turn a geometrically valid approach into jamming, failed release, or incomplete seating. We study this final phase after grasp acquisition and global approach, and ask how control authority should be divided between known geometry and learned behaviour. Our method retains a nominal task-space controller for structured insertion and seating, while residual PPO supplies bounded local corrections and decides when to release. Only the brief open-retreat-reclose transition is scripted. For the final policy used on hardware, a deployment-matched simulation evaluation over 512 fixed conditions yields 98.50 percent mean success (0.23 percentage-point sample SD) across three independent training runs, compared with 37.89 percent for nominal control. On the physical xArm7, 60 trials over 30 matched conditions show the same qualitative advantage: residual control raises success from 26.7 percent to 63.3 percent, reduces failures from 22 to 11, and wins 13 of the 15 matched conditions in which the two controllers differ. Robustness tests show that performance remains above 87 percent under initialization perturbations up to 1.5x, while very tight clearances expose the geometric limit of local correction. These results support a hybrid design in which geometry preserves reliable task structure and learning is concentrated on the contact-sensitive behaviour that fixed rules handle poorly.

0.31

Learning to Leverage Compliance: A Policy-Admittance Learning Framework for Robotic Insertion

cs.RO ·2026-09-25 ·Chongren Wang, Minghe Li, Honghua Dai, Zhicheng Lin, Shiyang Wei +1 more
similarity 0.69
Abstract

Policy learning and compliant control offer a promising route to reliable autonomous assembly under pose errors and contact uncertainty. However, combining them does not ensure coordination: the policy may continue pushing against contact while the controller yields, producing sustained loading with limited progress. To address this problem, we propose LeCo (Leverage Compliance), a policy-admittance learning framework that guides a visual policy through execution-time interaction under fixed admittance. A multirate feedback mechanism aggregates high-rate contact-interaction records into policy-transition rewards. An integrated conflict cost then characterizes sustained policy-loading/controller-unloading opposition, while a directional high-force tail cost captures continued-loading events within a transition. Together with task completion, these costs encourage the policy to leverage compliance with less unproductive loading. We evaluate LeCo on four real connector-assembly tasks, obtaining an aggregate success rate of 94%. Across tasks, mean successful-trial resultant-force and torque peaks decrease by approximately 30% and 64% relative to the comparison baseline. Reward ablation further shows that adding conflict shaping reduces median successful-trial contact-conditioned conflict density by approximately 53%. These results support learning to leverage fixed compliance by turning multirate policy-admittance interaction into complementary reward signals for effective, lower-load insertion.

0.23

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.68
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

PAKT: Physically-Aligned Kinesthetic Teaching for Reinforcement Learning

cs.RO ·2026-09-22 ·Lars Johannsmeier, Yashraj Narang
similarity 0.68
Abstract · 17 pages, 6 figures, 9 tables, Conference on Robot Learning

Real-world reinforcement learning (RL) systems still struggle with the demands of contact-rich industrial manipulation, including micrometer-level precision, success rates above 99%, and human-level cycle times. Although off-policy algorithms can improve performance by leveraging demonstrations and interventions, a key bottleneck is the lack of an intuitive interface for collecting such guidance while complying with constraints of the physical system and the policy. We propose PAKT, a framework for kinesthetic teaching in RL. As opposed to teleoperation approaches, PAKT relies on kinesthetic guidance, which is widely used in industry. However, a critical weakness of kinesthetic guidance is the possibility for the operator to move the robot along trajectories (e.g., velocities, accelerations, jerk) that the robot and/or policy cannot physically reproduce. Using PAKT, operators guide the robot through admittance control, which maps human-applied forces to motion. The downstream reference generator applies the same kinematic limits used during policy execution, keeping the collected trajectories within these limits. To support this teaching interface with an appropriate execution layer, PAKT adds a high-performance control stack that maps low-frequency RL actions to high-frequency torque commands. It consists of a reference generator and subsequent impedance controller, where the reference generator preserves the tracking performance of the impedance controller while improving contact handling and producing smoother policy actions. Across the reported runs on four insertion and industrial assembly benchmarks, including a data center compute tray, the end-to-end system reduces cycle time by 23%-48% and cumulative intervention count by 62%-86% relative to the HIL-SERL baseline. Project website: https://pakt-website.github.io/pakt-website}{https://pakt-website.github.io/pakt-website

0.37

CompliantWBC: Whole-Body Compliance for Heavy Humanoids via Force Latent Estimation and Residual Impedance Targets

cs.RO ·2026-09-27 ·Tan-Dzung Do, Cuc T. Trinh, Tuan Dat Phuong, Chien Le, Thanh Ly +2 more
similarity 0.68
Abstract · Project website: https://dotandung.github.io/compliantwbc/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

0.45