CS Paper Radar

Geometric Fixed-Time Sliding Mode Control for Constrained Attitude Tracking on $\mathrm{SO}(3)$

Saumitra Barman, Shashi Ranjan Kumar, Rohit Gupta

eess.SY ·submitted 2026-09-01 13:17 UTC · v1

Abstract

This paper studies constrained spacecraft attitude tracking on the Riemannian configuration manifold $\mathrm{SO}(3)$ in the presence of multiple attitude pointing constraints and matched external disturbances. To address this, an attitude potential function is proposed intrinsically on $\mathrm{SO}(3)$, and its key properties are established using intrinsic geometric analysis. Under mild conditions, the potential function is shown to admit a unique nondegenerate minimum at the desired attitude over the admissible subset of $\mathrm{SO}(3)$, defined by excluding the forbidden attitude regions as well as a measure-zero set, thereby ensuring a well-posed constrained attitude tracking problem. A Riemannian Hessian analysis shows that the Hessian of the potential function is locally uniform positive definite in an open neighborhood of the desired attitude, thereby establishing local strong convexity. A nonsingular fixed-time geometric sliding manifold is proposed using the Riemannian gradient of the potential function, leading to a geometric fixed-time sliding-mode-based constrained attitude control law. It is shown that, for every initial attitude in the admissible subset, the closed-loop state trajectory evolves on $\mathrm{SO}(3)\times\mathbb{R}^3$, with the attitude remaining in the admissible subset throughout the maneuver, while the state converges to a sufficiently small compact neighborhood of the desired equilibrium in a prescribed fixed time. Numerical simulations validate the proposed control approach and illustrate the theoretical results.

Closest papers

Nearest neighbours by meaning across the whole index.

Singularity-Free Guiding Vector Fields on SO(3) with Designer-Specified Progression Behavior

cs.RO ·2026-09-07 ·Jesus Bautista, Hector Garcia de Marina
similarity 0.60
Abstract · 12 pages, submitted to Automatica

This paper develops a singularity-free guiding vector field (SF-GVF) for path following on the special orthogonal group SO(3). First, we lift the Euclidean SF-GVF construction to SO(3), integrating the augmented-state approach with the intrinsic Lie-group geometry and obtaining a closed-form geometric guidance law whose integral curves converge to a designer-specified attitude path. The field is defined on a dense open subset of SO(3), excluding only the measure-zero antipodal set - a manifestation of the topological obstruction to continuous global stabilization on SO(3). The construction requires no per-step optimization and produces a control input intrinsically in so(3) as body angular rates. Second, we formalize the progression behavior along the path as a designer-supplied function ν(ξ), promoting the parametric speed from an implicitly resolved degree of freedom to a first-class design specification. In contrast to the Euclidean condition v = 0, which excludes vehicles with minimum-speed constraints, the corresponding condition ω= 0 on SO(3) is physically admissible for most platforms with active attitude control, making the progression behavior a design freedom structurally available on SO(3) but absent in the Euclidean setting. The framework's structural results are established under a bi-invariant Riemannian metric and hold uniformly across choices of path, progression, and Lyapunov gain. The framework is illustrated in simulation on self-intersecting paths under both constant and point-convergence progression behaviors.

0.53

Explicit Globally Asymptotically Stable Attitude Control with Reaction Wheel Angular Momentum and Torque Constraints

eess.SY math.OC ·2026-10-26 ·Javier Urrios, Rafael Vazquez, Guillermo Pacheco-Ramos
similarity 0.59
Abstract · Preprint accepted in CDC 2026 for presentation

We present an explicit Lyapunov attitude controller for rigid spacecraft actuated by three orthogonally mounted reaction wheels, parameterized using Modified Rodrigues Parameters (MRPs), which enforces hard bounds on wheel angular momentum and applied torque at every instant without solving any online optimization. A barrier-inspired momentum feedback prevents wheel saturation; a continuous positive scalar uniformly scales the feedback whenever a torque limit would otherwise be breached, preserving Lyapunov convergence. For the regulation problem, global asymptotic stability (GAS) is established via LaSalle's invariance principle, and constraint satisfaction is proved analytically for arbitrary symmetric positive-definite inertia matrices. Replacing the barrier by an error-state counterpart extends the design to tracking, with asymptotic (though no longer global) stability and the same safety guarantees under explicit feasibility conditions on the reference. Simulations confirm convergence and constraint satisfaction, and compare performance against other controllers.

0.30

Intrinsic Path Following on $\mathsf{SO}(3)$

eess.SY math.OC ·2026-10-03 ·Adeel Akhtar
similarity 0.56
Abstract · 8 pages, 2 figures

This paper studies intrinsic path following for fully actuated rigid-body attitude dynamics over a broad class of attitude paths, namely arbitrary smooth embedded closed curves on $\mathsf{SO}(3)$. We construct a tangential--transverse state decomposition on a tubular neighborhood using normal and pullback bundle geometry. The resulting second-order dynamics admit a smooth feedback transformation that independently assigns tangential and transverse covariant accelerations. A transverse proportional--derivative law renders the path-following manifold invariant and locally uniformly exponentially stable on an explicit forward-invariant neighborhood, while leaving the tangential dynamics freely assignable. This allows independent regulation of progression along the path, stabilization of a selected attitude on the path, or tracking of a time-varying motion. For a representative fiber path, the tubular coordinates are obtained in closed form up to the natural cut-locus obstruction, and simulations illustrate point stabilization and trajectory tracking.

0.22

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.56
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

A Geometric Observer for Visual-Inertial Odometry using Optical-Flow Constraints

eess.SY cs.RO ·2026-11-15 ·Tarek Bouazza, Soulaimane Berkane, Tarek Hamel
similarity 0.55
Abstract · 12 pages, 6 figures. Submitted to ECC 2027

This paper presents a geometric observer for monocular visual-inertial odometry driven by individual optical-flow constraints. For each tracked point, the bearing and its rotationally compensated derivative give a depth-free homogeneous constraint on the body-frame velocity. These constraints enter the innovation of an observer on the gravity-augmented group $\mathbb{SE}_3(3)$ through a Riccati gain, without estimating depths or reconstructing the direction of motion. The auxiliary gravity state makes the six-dimensional body-frame velocity-gravity error dynamics independent of the attitude correction, and their uniform observability is shown to be equivalent to persistent excitation of a matrix formed from the inertial bearings and their derivatives. Under this condition, the body-frame velocity and gravity errors converge globally and uniformly exponentially, and a gravity-based attitude correction renders the combined velocity, gravity, and reduced-attitude error almost globally asymptotically stable and locally uniformly exponentially stable. Simulations illustrate the excitation condition, recovery from initial errors, and sensitivity to perturbed measurements.

0.20

Vector Field Following for Quadrotors via Reduced Attitude Representations with Applications to Safety-Critical Control

eess.SY ·2026-10-05 ·Mohammad Mirtaba, Max H. Cohen
similarity 0.55
Abstract

Vector field tracking for quadrotors provides a systematic framework for specifying complex behaviors at the translational level and transferring them to the full vehicle dynamics. Objectives such as safety, for example, can be encoded into a low-dimensional vector field, which is then embedded into the full dynamics through appropriate tracking conditions. The development of such tracking controllers for quadrotors can be facilitated by the fact that their translational dynamics depend only on the thrust direction and are independent of the vehicle's heading. Thus, reduced-attitude representations, leveraging the geometry of the unit sphere, provide a natural framework for vector field tracking on quadrotors. In this work, we propose two vector field tracking controllers for quadrotors using reduced-attitude representations based on dynamic extension and geometric control, respectively. Next, we illustrate how safety can be encoded into the desired vector field using control barrier functions and enforced for the full system. The effectiveness of the proposed approaches is demonstrated via simulations and experimental flight tests.

0.15

Variable-Step Time-Delay Control for Proactive Aperiodic Spacecraft Attitude Control

eess.SY ·2026-08-11 ·Yonsoo Kim, Hancheol Cho
published similarity 0.53
Abstract · 17 pages, 12 figures, 4 tables. Revised version (v3) with substantial updates to the theoretical analysis, practical implementation, and num…

This paper addresses proactive aperiodic spacecraft attitude control under model uncertainty, environmental disturbances, and actuator degradation. To this end, we develop Variable step Time Delay Control (VTDC), which jointly designs robust feedback control and control-update scheduling rather than treating them as separate components. Inspired by adaptive stepsize regulation in Runge Kutta integration, VTDC structures the local control error to scale with the realized timestep. Using sliding manifold based Time Delay Control, the resulting System Time Delay Error (TDE), which reflects local model and uncertainty variations, is shown to be quadratically bounded by the control interval. This relation yields a closed form feedback law that enlarges or reduces the subsequent interval to regulate the TDE magnitude. The next update time is therefore determined algebraically without continuous trigger monitoring, future state prediction, or iterative search. The resulting variable step closed loop admits bounded timesteps and step ratios, excludes Zeno behavior, and renders the sliding variable uniformly ultimately bounded. Nonlinear spacecraft attitude control simulations demonstrate accurate tracking with low scheduling cost under representative uncertainties and disturbances.

0.23

Riemannian Density-Driven Optimal Control: Tangent-Space LQR for Second-Order Multi-Agent Systems on Curved Manifolds

cs.MA math.OCcs.ROeess.SY ·2026-09-19 ·Kooktae Lee, Ruchika Singh
similarity 0.52
Abstract

Density-Driven Optimal Control (D2OC) provides an effective framework for steering multi-agent systems toward prescribed spatial distributions. However, existing D2OC formulations are primarily developed for Euclidean domains and do not directly account for intrinsic manifold geometry. This paper extends D2OC to second-order multi-agent systems evolving on Riemannian manifolds. The proposed Riemannian D2OC (R-D2OC) constructs a local distribution objective in the tangent space of each agent through logarithmic maps and uses its weighted center as the reference for a finite-horizon LQR. The resulting control is executed on the manifold through intrinsic second-order dynamics and parallel transport within a receding-horizon scheme. We establish local curvature-dependent bounds that quantify the approximation introduced by the tangent-space reduction and characterize the resulting target bias. Furthermore, we derive a conditional discrete-descent result showing that the closed-loop objective decreases when a local velocity-alignment condition is satisfied. Numerical simulations on a 3D ellipsoidal manifold demonstrate distribution-level control and empirically support the proposed approximation and descent results.

0.28