CS Paper Radar

How Much Training is Needed with a Digital Twin?

Ahmad Bazzi, Marwa Chafii

eess.SP eess.SY ·submitted 2026-09-01 13:22 UTC · v1

Abstract

The following paper addresses how much pilot training is needed when a digital twin (DT) of the wireless radio channel is available to aid a wireless communication system with a channel estimation task. The DT of a wireless channel is widely expected to reduce the pilot overhead of channel estimation, following the informal rule that \emph{``the more accurate the twin, the fewer pilots are needed.''} This trade-off, however, has only ever been demonstrated empirically and never quantified. We close this gap by treating the DT as a complementary measurement of the channel that the receiver fuses with its pilot observations in the physical world. Consequently, fusing the physical and digital worlds through the best linear unbiased estimator, we derive a DT-aided Cramér-Rao bound, and from it a \emph{pilot-equivalence law} that converts DT fidelity into an equivalent number of training symbols. For a biased twin unknown to the estimator, we obtain the exact mismatch threshold beyond which trusting the DT is worse than ignoring it. We quantify how much training is needed with the DT to attain a desired mean square error on channel estimation. Particular cases are discussed to tell when training in the physical world can be completely bypassed. We finally translate these results into a block-fading achievable rate whose optimal training length is the unique root of a single equation, and identify the DT fidelity above which pilot training can be dispensed with altogether. Extensive numerical results corroborate closed-form expression and reveal that the value of a DT is largest at finite signal-to-noise ratio and vanishes in both the low- and high-SNR limits.

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic-Twin Channel Estimation: From Sparse Pilots to Persistent CSI

eess.SP ·2026-08-21 ·Tuo Wu, K. C. Ho
similarity 0.66
Abstract

Each repeated pilot block is typically treated as a separate channel-estimation problem, although much of the angle--delay state persists across updates. This paper defines an electromagnetic twin (ET) as a recursively synchronized signal-processing state containing channel state information (CSI), coefficientwise uncertainty, support confidence, and age. A channel knowledge map may initialize this state; subsequent pilots predict, correct, validate, and store the state. We formulate an anchored-window inverse problem that yields online uncertainty-weighted correction and fixed-lag smoothing as two convex operating modes of a persistent-state estimator. Uncertainty-aware ET FISTA (UET-FISTA) gives a zero-delay update, while an alternating direction method of multipliers (ET-ADMM) jointly refines a short window when delayed CSI is acceptable. Held-out pilots choose update, complete refresh, or hold under a prescribed family-wise false-acceptance probability, preventing an inaccurate stored state from being reused blindly. Conditional Bayesian Cramér--Rao bounds quantify the information supplied by the stored state and by future pilot blocks. With 20\% pilots, UET-FISTA reaches $-11.55$ dB normalized mean-square error, compared with $-3.42$ dB for static FISTA. Over 200 independent 50-epoch trajectories, three-epoch smoothing improves matched-state NMSE from $-10.28$ to $-13.41$ dB. On 40 off-grid QuaDRiGa trajectories, online UET-FISTA improves static recovery from $-1.37$ to $-1.88$ dB and effective rate from 1.688 to 1.919 bit/s/Hz. These results identify when persistent CSI reduces pilot demand and when the receiver should instead refresh or preserve its state.

0.54

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.64
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.63
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.61
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

Pilot-Projected Nonlinear Self-Interference Estimation with Simultaneous Uplink Training

cs.IT ·2026-10-16 ·Seyed Mohammad Azimi-Abarghouyi, Thomas Eriksson
similarity 0.59
Abstract

This paper considers nonlinear digital self-interference (SI) cancellation and uplink-channel estimation for single-antenna in-band full-duplex radios when a desired uplink pilot is present during SI training. In this setting, a rich nonlinear SI dictionary can absorb part of the structured pilot response, while its large and correlated set of basis functions can make reliable SI estimation difficult, particularly with limited training. During SI-coefficient estimation, we treat the unknown uplink channel as a nuisance parameter and eliminate it to obtain an equivalent reduced SI estimation problem on the orthogonal complement of the pilot convolution subspace. Since the projected nonlinear dictionary can remain ill conditioned, we develop two complementary full-dictionary estimators: a pilot-projected ridge estimator with Bayesian-information-criterion tuning (PP-RidgeBIC), which uses global ridge shrinkage, and a pilot-projected group-sparse Bayesian estimator (PP-GSBE), which learns branch-dependent Bayesian shrinkage from the data. These estimators offer two complementary operating points: PP-RidgeBIC favors computational efficiency, whereas PP-GSBE provides greater adaptivity to heterogeneous nonlinear SI components. Simulations show substantial gains in SI cancellation and uplink reception over non-projected and hard-selection alternatives; notably, PP-GSBE suppresses the residual SI below the noise floor with moderate training and consistently provides the strongest performance under nonlinear model mismatch.

0.24

Input-Correlated Supervision Noise Limits the Benefits of OTA Training for Learned Receivers

eess.SP ·2026-08-13 ·Riku Luostari, Dani Korpi, Olav Tirkkonen, Harri Holma
similarity 0.59
Abstract

While learned wireless receivers are typically studied using synthetic data, the impact of over-the-air (OTA) measurements for training remains unclear. We conducted a 5.88 GHz measurement campaign with a 5G/6G-like orthogonal frequency-division multiplexing (OFDM) system across diverse environments and mobility conditions, and trained a neural channel estimator and a capacity-matched end-to-end neural receiver using mixtures of measured and synthetic data. Increasing the OTA fraction revealed a fundamental asymmetry: measured data consistently improved the end-to-end receiver, whereas the channel estimator peaked at an intermediate fraction and degraded with fully measured training. We identified supervision quality as a key contributor: OTA channel labels are derived from noisy received signals and therefore contain supervision errors correlated with the receiver input, whereas decoded bits validated by a cyclic redundancy check (CRC) provide effectively error-free supervision. Denoising the channel labels mitigated the degradation, and a controlled simulation showed that label noise of equal power degrades the estimator far more when it is correlated with the input. For OTA training, end-to-end receivers thus benefit from fully measured data, whereas channel estimators benefit from moderate OTA fractions but require improved label quality.

0.38

TiamiTwin: A Digital Twin for Bistatic ISAC Drone Sensing, Validated Against Measurements

eess.SP cs.NI ·2026-09-19 ·Mehdi Zafari, Saeede Enayati, A. Lee Swindlehurst, Amitav Mukherjee
similarity 0.58
Abstract · Accepted for presentation at the IEEE MILCOM 2026 Workshop on Integrated Sensing and Communication for Critical Infrastructure Protection (I…

Monitoring lower airspace over critical infrastructure using cellular signals of opportunity is highly practical because transmitters are pre-deployed, licensed, and continuously active. Digital twins can evaluate the feasibility of such integrated sensing and communication (ISAC) architectures, but their predictive accuracy must be validated against real-world data. This paper reports validation results for TiamiTwin, a digital twin developed for bistatic ISAC drone sensing, using empirical measurements from an operational 5G deployment featuring a commercial band n41 gNB and a receiver separated by 572.8 m over a non-line-of-sight (NLOS) channel. TiamiTwin incorporates three parallel channel representations evaluated on a 240-subcarrier grid: the 3GPP TR 38.901 (Release 19) bistatic ISAC model, a ray-traced site model, and the captured field measurements. Empirical results demonstrate that both statistical and ray-tracing models under-predict the measured root-mean-square (RMS) delay spread by approximately a factor of three. Furthermore, target reflections sit 68 dB below static clutter in power, making target detection entirely dependent on Doppler separation to isolate the drone from zero-Doppler background returns. Despite this severe clutter environment, the target remains separable along 88% of the flight path in the delay, Doppler, or joint delay-Doppler domains.

0.19

Geometry-Aided Channel Deduction with Partial Channel Estimates and Uncalibrated Digital Twin

eess.SP cs.LG ·2026-09-29 ·Hongning Ruan, Zhaoyang Zhang, Zirui Chen, Ziqing Xing, Zhaohui Yang +1 more
similarity 0.58
Abstract

The acquisition of high-dimensional channel state information (CSI) in wireless MIMO-OFDM communications usually requires high pilot overhead, or relies on accurate and complete positional or environmental information. In this paper, we propose a geometry-aided channel deduction (GCD) approach, which utilizes an uncalibrated digital twin (DT) with only approximate environmental geometry and positions to assist the channel acquisition. The key rationale behind is that, even imprecise geometric information, which can be easily obtained in advance through radio sensing technologies or existing geographic databases, provides certain structural features about the current channel; meanwhile, the coarse instantaneous channel estimates using only a small amount of pilots provide dedicated information that aligns with the channel structure and further compensates for the geometry inaccuracy and other channel unknowns. To this end, we first extract geometric features from the DT, which contain only simple structural information of the channel. Then we propose random prompt augmentation, a novel method to generate an appropriate prompt that converts geometric multi-path structure into a CSI-like representation while suppressing the disturbance of other unknown channel parameters. The prompt is then fused with the pilot-based instantaneous channel estimate via a channel deduction network. To further enhance the network's versatility, we incorporate pilot configurations into the existing learning architecture to support variable pilot patterns. Comprehensive experiments validate the superiority of the proposed method, which demonstrates high channel acquisition quality, low pilot overhead, and strong robustness. Furthermore, the structural prompt also serves as scenario-related context, enabling our approach to generalize well in new scenarios.

0.43