CS Paper Radar

SMELT: Scaling Laws for Compute-Matched MoE Looped Transformers

Shaowen Wang, Ge Zhang, Kairong Luo, Yuhao Wu, Shaofan Liu, Jiaheng Liu, Wenhao Huang, Shen Yan, Jian Li

cs.LG ·submitted 2026-09-01 14:52 UTC · v3
highly cited

Abstract

Looped Transformers increase effective depth by iterating a shared block of layers, but most evaluations compare at fixed model size, conflating architectural advantage with extra FLOPs. We study looping on Mixture-of-Experts Transformers while closely matching per-token FLOPs, total non-embedding parameters, and KV cache. Through a series of ablations, we arrive at a recipe we call SMELT (Sparse MoE Transformer, middle layers Loop Twice), which loops the middle half of layers twice while matching the unlooped Baseline on all three budgets. We scale SMELT across four sizes up to 54B non-embedding parameters and fit a separate Chinchilla-style scaling law for each architecture. SMELT's loss drops faster with compute, saving 6.8--18.0\% of training FLOPs on the compute-optimal frontier. The advantage transfers to downstream benchmarks beyond what validation loss predicts, is largest on Code, and grows with sample length and the number of in-context examples. Mechanistic analysis shows that the second visit reduces the attention sink and redirects mass toward content-relevant tokens, an inductive bias that may underlie the observed performance gains. These results show that looping can improve Transformers even under budget matching, offering a practical recipe that turns depth reuse into measurable gains.

Comment
36 pages, 25 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling Laws for Looped Mixture of Experts

cs.LG cs.AIcs.CL ·2026-09-30 ·Yanbei Chen, Anirudh Goyal, Raghuraman Krishnamoorthi
similarity 0.73
Abstract · 19 pages

Looped transformers and Mixture-of-Experts (MoE) offer complementary routes to efficient scaling: recurrence increases computational depth at fixed parameters, while MoE sparsity expands total capacity at fixed active compute. Yet existing scaling laws model recurrence or sparsity in isolation. In this work, we introduce Loop Scaling Laws, the first scaling law to jointly model recurrence and sparsity alongside model size and data. At its core is a bounded, sparsity-conditional recurrence mapping that characterizes the effective-parameter gain from looping and how sparsity raises this gain. The laws predict the held-out loss of looped models more accurately than prior alternatives, and recover the standard dense and MoE scaling laws as special cases. Beyond prediction, the fitted laws provide a principled foundation for designing looped MoE models under compute and memory constraints. Downstream evaluations further demonstrate the complementary benefits of the two axes: sparsity delivers ~3x active-parameter efficiency, recurrence yields ~2x total-parameter efficiency on reasoning, and joint scaling further advances the performance frontier. As a practical extension, we show these gains hold at trillion-token scale: at matched training compute, a looped MoE with law-derived recurrence matches a ~2x larger non-looped MoE on the reasoning benchmarks, while enabling test-time scaling through recurrence.

0.49

How to Loop Your Transformer: Loop Scaling, Specialization, and Parallel Inference

cs.LG cs.AI ·2026-10-29 ·Chanakya Ekbote, Artidoro Pagnoni, Devendra Singh Sachan, Shruti Bhosale, Mike Lewis +3 more
similarity 0.72
Abstract · 149 pages with appendix. Prerpint

Looping in transformer models reuses weights by repeatedly applying the same transformer, or parts of it, making the model deeper without increasing its parameter count. Whether looping is useful depends on which constraint dominates: model size, training compute, or autoregressive inference efficiency. We study these trade-offs jointly in dense decoder-only transformers trained from scratch, varying which parts of the model are looped, how many loops are applied, and how information is passed between loops. Our experiments span models with up to 1B parameters, trained on up to 155B tokens with up to $1.07\times10^{21}$ FLOPs and 32 loops. We find that looping the full transformer generally gives the strongest quality at a fixed parameter budget, whereas looping a middle block of layers gives a better return when training FLOPs are constrained. Adding loops is not uniformly beneficial: gains eventually saturate, reverse, or become unstable. This motivates asking whether forcing every loop to use the same weights limits the benefit of deeper looping. We address this by adding small loop-specific low-rank adapters that improve quality, with larger gains as more loops are added. Looped transformers also suffer a decoding slowdown proportional to the number of loops. Parallel Loop Transformers address this by passing hidden states between loops across adjacent token positions, allowing loop stages to run concurrently. However, in our experiments the original formulation does not consistently retain the quality gains of ordinary looping. We find that preserving the current-token embedding and separately normalizing it and the previous-token hidden state before combining them recovers strong performance across model scales and training budgets. Together, these results show that effective looping requires matching the design to the resource constraint and inference setting.

0.13

Improving Test-Time Scaling with Adaptive Looped Transformers

cs.CL cs.LG ·2026-09-28 ·Yichen You, Tianyu Fu, Aosong Feng, Xingtai Lv, Xuefei Ning +2 more
code/datahighly cited similarity 0.71
Abstract

Looped transformers have demonstrated promising parameter efficiency by reusing layers for latent computation. Prior studies compare looped and non-looped models at matched parameters or per-token FLOPs. However, to the best of our knowledge, whether looping improves test-time scaling as outputs grow longer remains underexplored. Through post-training looped transformers, we study the accuracy-compute slope, measured as the accuracy gain per doubling of test-time decoding FLOPs. We find that existing looped transformers often yield steeper slopes than their non-looped baseline, yet underperform it at matched compute. While fixed-depth looping spends extra iterations on every token, our analysis shows that many tokens do not benefit from extra iterations. We therefore propose TaH2, which enables the model to focus extra iterations on the tokens that benefit from looping. It jointly post-trains the backbone and an iteration decider through lookahead depth supervision, which uses online labels indicating whether further iteration improves the prediction. TaH2 improves both the efficiency and attainable accuracy of test-time scaling. On challenging AIME benchmarks, TaH2 improves the accuracy-compute slope by 53% (2.74 vs. 1.79) over the non-looped baseline, exceeding the baseline's peak accuracy by about 3.4 points at matched test-time compute. As the maximum iteration depth increases, existing looped models largely plateau, while TaH2's gain over the non-looped baseline continues to grow from +2.8 points at depth 2 to +3.9 points at depth 8. Our code is available at https://github.com/thu-nics/TaH.

0.61

Improving Parameter Utilization by Sharing Neural Experts Across Layers in Transformers

cs.LG cs.AI ·2026-08-31 ·Dian Jiao, Jiaxin Duan, Shuai Zhao, Jiabing Leng, Yiran Zhang +1 more
top venue similarity 0.70
Abstract · 11 pages, 6 figures. To appear in the Proceedings of EMNLP 2026 Main

Transformer-based large language models often suffer from inter-layer parameter redundancy, where functional transformations are redundantly learned across network depths. We propose CS-MoE, a novel Transformer architecture featuring cross-layer expert sharing to address this inefficiency. Deviating from the widely used Mixture-of-Experts (MoE) architecture that terminates each Transformer block with layer-isolated experts, CS-MoE combines layer-independent experts with concurrent access to a centralized, globally shared expert pool. This \textit{Global Experts Sharing} mechanism enables elastic control over token-level parameter activation and computational consumption (FLOPs). Experiments demonstrate that CS-MoE achieves lower perplexity than equal-scale dense Transformers while activating only 55\% of parameters. Furthermore, its performance scales monotonically with an increased number of activated experts and approaches MoE counterparts that consume more FLOPs by expanding the shared pool with a fixed FLOPs budget. CS-MoE also establishes a flexible Pareto frontier between computational cost and model capacity, offering an efficient alternative for computation-constrained environments.

0.59

The Surprising Effectiveness of Shared Memory in Looped Transformers

cs.LG cs.AI ·2026-10-01 ·Giovanni Monea, Keshav Ramji, Yousef El-Kurdi, Luis A. Lastras, Yoav Artzi +2 more
highly cited similarity 0.68
Abstract

Looped Transformers apply the same layers several times per token, adding compute to improve quality without more parameters. Each recursion, however, writes its own key-value cache, so memory still grows with compute. Inference-time techniques can shrink this cache at a cost in quality. We pretrain looped language models to share memory: only the first recursion writes a cache, and later recursions read it while keeping a short window of their own. Surprisingly, we find that sharing memory does not cost quality and instead improves it. At 150M-1B parameters, our Looped Prediction Transformer (LPT) and its hybrid variant set a new quality-memory frontier for looped models: with five recursions, the hybrid lowers validation perplexity on FineWeb-Edu by 1.12-1.82 relative to a same-size standard Transformer while using 76-79% less context memory. Through an extensive analysis, we investigate why memory sharing helps. Shared and local memory develop different representations, and later recursions attend mostly to the shared memory, which also acts as a gradient highway to the first recursion.

0.40

Looping Beyond Twice: A Scalable Recipe for Looped Mixture-of-Experts

cs.LG cs.AI ·2026-10-01 ·Di He, Pengxiang Li, Da Chang, Qingyan Meng, Lu Yin +1 more
code/datahighly cited similarity 0.68
Abstract

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

0.61

Pipeline-Native Transformers: Co-Designing Model Architecture and CPU Inference for Bandwidth-Efficient Autoregressive Decode

cs.AR cs.LGcs.PF ·2026-08-24 ·Tom Poperszky
code/data similarity 0.68
Abstract · 77 pages, 2 figures. Model weights and binaries: https://huggingface.co/tompoper/cflow

Single-token autoregressive decode on CPUs is bound by memory bandwidth, not arithmetic: a modern CPU sustains roughly 1 TFLOP/s of compute but only about 50 GB/s from main memory, and each generated token must stream every active weight once. This report argues that the most effective response is to co-design the model architecture and the inference runtime together. It presents cflow, a CPU-first streaming engine, alongside a family of pipeline-native transformer architectures whose inter-layer dependency graphs are constructed to permit a vertical, stage-major execution schedule. cflow stores weights as L2-sized tiles in compute-consumption order, reads only the top-k experts of each mixture-of-experts layer, fuses projections, and executes a delay-aware schedule from per-model dependency parameters. Across five architectures trained on TinyStories, one (arch2_4_combined) achieves a 2.00x reduction in critical-path weight bandwidth (9.00 to 4.50 MB/token) within 0.24 perplexity of the best candidate, and the tile layout incurs 7.29x fewer L1-data read misses than a row-major baseline. On a 30.9-billion-parameter pipeline-native MoE, cflow decodes at 5.94 tokens/s (tok/s) on a 32-vCPU Ice Lake server, ahead of llama.cpp (4.75) and the vLLM CPU backend (1.65) on comparably sized dense models. Realizing the expert-delay window as asynchronous I/O overlap on a disk-resident expert tier yields a further net win of up to 1.68x, matching the overlap model within 1%. Measurement refutes one of the eight design claims and leaves a second inconclusive; both are reported in full, with the conditions under which they would hold.

0.26

LSTM-Style Looped Transformers with Shared KV Caches

cs.LG ·2026-10-23 ·Andreas Kirsch
similarity 0.68
Abstract · 12 pages + 14 pages appendix

Recurrent transformers reuse weights to perform deep computation with fewer parameters. We study an LSTM-style transformer that also shares one key--value cache across its recurrent core. At width 1024, it uses 40.4% fewer parameters than an untied control at nearly matched forward FLOPs, and reduces persistent cache sets from fifteen to four. Parallel training supplies cache entries from a standard-attention pass, whereas continuation reads entries produced recursively using shared attention. We address this mismatch by aligning the two training passes' cache entries with a consistency loss during the final 10% of a fixed training-token budget. Across three model widths on FineWeb, this removes 81--89% of the continuation-loss penalty relative to full-cache evaluation. The improvement replicates on disjoint documents for two training seeds. Across four widths and 1.05--4.19B training tokens, the loss cost of weight tying is smallest at lower token budgets, suggesting an opportunity to use recurrent computation when data and model storage are limited.

0.32