CS Paper Radar

A Physics-Consistent Benchmark for Contact-Rich Human-Robot Interaction in Assistive Care

Chengxiao He, Shanghai Yuan, Liuqun Fan, Shenzhen Zhu

cs.RO ·submitted 2026-09-02 10:14 UTC · v1
benchmark

Abstract

Conventional task-level evaluation asks whether a robot policy completes a specified action, but can miss failures that emerge only during physical human contact. This limitation is critical in contact-rich assistive tasks, where meaningful evaluation requires a physically responsive human, interaction-quality assessment beyond task success, and a leak-free observer-scorer protocol. We introduce a physics-consistent benchmark for contact-rich human-robot interaction, instantiated in robot-assisted bathing. The benchmark combines a deformable, passively responding human, physics-aware scores alongside task-level success, and a frozen vision-only / scorer-only evaluation protocol. To establish physical validity, region-wise simulated responses are calibrated against force-indentation measurements from Franka impedance pushes on a medical-care manikin. Under a frozen T1-T7 protocol with 140 runs per method, an LLM-augmented state machine (State Machine) achieves 72.9% task success but drops to 56.4% after correct-region and force-safety screening; VoxPoser produces lighter and more stable contact but completes only 27.9% of trials; and zero-shot pi0.5 achieves 0.7% task success with no correct-region or safety-gated successes. These results show that task completion alone does not imply physically valid contact and motivate physics-aware screening before deployment of contact-rich assistive robot policies.

Comment
8 pages, 4 figures. Submitted to the 2026 IEEE International Conference on Robotics and Biomimetics (ROBIO)

Closest papers

Nearest neighbours by meaning across the whole index.

Compliance for Free: Learning Identifiable Impedance via Bilateral Teleoperation

cs.RO ·2026-09-17 ·Harsha Guda, Adrià Colomé, Carme Torras
similarity 0.67
Abstract

Vision-language-action models tell a robot where to move, but not how hard to push. Contact-rich tasks depend on that second quantity, compliance, yet no widely used demonstration interface records it. The obstacle is identifiability as realized pose and measured force cannot separate the operator's intended equilibrium from their stiffness, so VR controllers, SpaceMouse and handheld grippers cannot supply compliance supervision even in principle. Prior compliance-output policies work around this with hand-specified task structure, privileged simulation contact state, or dedicated force and tactile hardware. Four-channel bilateral teleoperation removes the ambiguity directly by using the leader arm as a separate measurement of the intended equilibrium, making per-axis stiffness identifiable by regression using only the joint-torque sensing already on the manipulator. This yields per-timestep, direction-dependent compliance labels at zero annotation cost, which we use to fine-tune a VLA to emit stiffness alongside pose. On a Franka Research 3 wiping task, ours is the only policy of five whose contact force changes when the instruction asks for a firm wipe rather than a normal one (6.4N (normal) to 9.1N (firm) RMS, Cohen's d = 0.89, p = 0.023

0.22

FORCA: A Force-Aware Coding Agent for Contact-Rich Robot Manipulation

cs.RO ·2026-10-22 ·Xiao Tan, Yixuan Wang, Zhexi Wang, Wenzhen Yuan
similarity 0.66
Abstract · Project website: https://tanoom.github.io/forca/

Coding agents can translate language instructions into robot programs. For contact-rich manipulation, a key challenge is to generate and refine control logic that responds to physical interaction. We present FORCA, a coding agent that takes visual observations and wrist force/torque (F/T) measurements as input to write Python programs for contact probing and force-responsive motion. Between executions, the agent inspects force records alongside visual outcomes to diagnose failures and revise both motion and force-feedback control logic. FORCA requires no demonstrations, task-specific training, or simulation. Across five real-robot tasks, we demonstrate its effectiveness in three forms of contact-rich manipulation: improving manipulation accuracy, adapting to changes in object or surface properties, and regulating contact under surface variation and object motion. Compared with a vision-only variant of the same agent, FORCA improves grasp accuracy and task success and reduces contact loss in wiping and peeling.

0.35

High Fidelity Capture, Reconstruction, and Transfer of Human Demonstrations for Robot-Assisted Bathing

cs.RO cs.GR ·2026-08-10 ·Arjun S. Lakshmipathy, Jonathan P. King, Ethan Zuo, Rohit Satishkumar, Hongyi Chen +4 more
published similarity 0.66
Abstract · Accepted to Robotics: Science and Systems (RSS) 2026. Official conference page: https://www.roboticsproceedings.org/rss22/p094.pdf

Despite the demand for robots in high-value clinical tasks like bathing, contemporary systems still lack the safety and reliability required for complex, sustained physical interaction with humans. A key challenge hindering the development of such systems is that collecting, understanding, and effectively transferring highly dynamic, contact-rich human bathing demonstrations is difficult, even with modern motion and tactile sensing equipment. We present a straightforward, but effective framework for doing so with high fidelity by utilizing contact regions as a key processing primitive. We use our framework to build a dataset of bathing demonstrations performed by trained clinicians on human subjects. We then use this dataset to design and control an arm-mounted dexterous soft hand to perform bathing tasks on a mannequin using open- and closed-loop strategies. Our dataset is the first to provide high quality synchronized motion, shape, contact, and force during sustained, contact-rich human-human interaction, and our transfer strategies demonstrate effective use of these data across multiple levels of the robotics stack. All relevant materials will be publicly released to enable further advancements in physical human-robot interaction (pHRI) research.

0.38

LLM4Robot-Bench: How Far Can GPT-6 Astra Go in Robotic Manipulation? A Hierarchical, Paired Sim-Real Benchmark

cs.RO ·2026-10-25 ·Haibao Yu, Jiaqi Meng, Zijian Zhang, Bowen Jing, Lei Yang +14 more
benchmark similarity 0.66
Abstract · 31 pages, 11 figures. Renamed PhysLadder to LLM4Robot-Bench; minor text revisions

We introduce LLM4Robot-Bench, a hierarchical, paired Sim-Real benchmark for evaluating physical interaction capabilities in contact-rich manipulation. Its 16 household tasks span three cumulative levels: contact selection and geometric alignment (L1), force regulation within sustained contact (L2), and coordinated contact reconfiguration and force regulation (L3). Each task is instantiated in physically and visually matched simulated and real-world environments, with shared task definitions and success criteria. We evaluate GPT-6 Astra zero-shot with three trials per task in each environment. Real-world success rates decline from 80.0% at L1 to 47.6% at L2 and 0.0% at L3, with corresponding simulation rates of 66.7%, 47.6%, and 0.0%. Ten of the 16 tasks have identical success counts across environments; the remaining six differ by one success out of three trials. Across both environments, recurring difficulties in spatial reasoning, contact selection, force regulation, and coordination often prevent local physical progress from accumulating into task completion. These findings characterize Astra's observed capability boundary across increasing interaction demands and, for this model, support matched simulation as a repeatable, scalable testbed for studying the sustained, coordinated physical interactions that limit reliable manipulation.

0.11

DEFT-VLA: Stage-Localized Force Specialization for Contact-Rich Robotic Manipulation

cs.RO ·2026-10-10 ·Zan Huang, Yibo Qiu, Kan Ding, Xuanping Zhang, Ao Tian +2 more
similarity 0.65
Abstract

Contact-rich manipulation poses a stage-dependent sensory conflict: vision and proprioception are essential for localization and approach, when force is largely uninformative and potentially distracting, whereas force becomes critical after contact, when irrelevant visual details and correlated robot states may become shortcuts. We propose DEFT-VLA (Dual-Expert Force-specialized Training for Vision-Language-Action Manipulation), which retains the task-adapted base expert for vision-dominated non-contact behavior and introduces a force-aware contact expert for critical contact stages, localizing force-conditioned adaptation to where it is needed. We further introduce a contact-localized force-attending curriculum that applies force-attending post-training only to the contact expert, progressively restoring vision and masking state tokens to suppress shortcuts. Real-robot experiments on pipette tip attachment, bimanual pipette aspiration, and whiteboard wiping show that DEFT-VLA effectively exploits force feedback to improve contact-stage performance while maintaining strong non-contact behavior and robustness to held-out grasp heights. It improves overall task success by 20-40 percentage points over the strongest baseline on each task.

0.13

PredTac: Learning Contact-Rich Manipulation with Predicted Touch

cs.RO ·2026-09-14 ·Weijia Fan, Daqiang Guo
similarity 0.65
Abstract · 8 pages, 4 figures

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

0.25

GPT-6-Astra Understands Touch and Outperform Vision--Tactile--Language--Action Models

cs.RO cs.CL ·2026-10-20 ·Ziyong Wang, Yupei Lin, Runxuan Huang, Liang Lin, Dongyu Zhang +1 more
similarity 0.64
Abstract · https://gpt-as-tactile-policy.github.io/

General-purpose multimodal models have shown promise as direct robot action policies, yet whether they grasp the physics underlying real-world interactions and can apply that understanding to guide action remains underexplored. We investigate this question using contact-rich manipulation as a representative testbed, examining tactile understanding as a concrete instance of this broader capability. Contact-rich manipulation requires interpreting tactile feedback and adjusting actions after obstruction. Existing learned tactile policies acquire these capabilities through specialized pretraining and per-task optimization, with substantial data and training costs. We present GPT-as-Tactile-Policy, which summarizes expert demonstrations into task guidance and tactile references for contact assessment and corrective action. GPT-6-Astra combines this context with multimodal observations and interaction history to generate control commands and adjust actions through contact feedback. Without additional robotics-specific pretraining or per-task policy fine-tuning, our method achieves 93.8\% mean success across five UniVTAC tasks. Overall performance is comparable to state-of-the-art policies, with higher success on selected tasks. On Insert Hole, tactile feedback improves success from 31\% to 99\%. Execution analysis further demonstrates contact-guided probing and correction, supporting manipulation progress through explicit expert experience and online feedback.

0.40

CompVLA: A Variable Compliance Vision-Language-Action Model for Contact-rich Manipulation

cs.RO ·2026-09-20 ·Jongmin Kim, Junsu Ha, Che-Sang Park, Minchang Song, Hyeokju Jeong +3 more
hot direction similarity 0.64
Abstract · Conference on Robot Learning (CoRL) 2026

Contact-rich manipulation, requiring robots to regulate not only motion but also how they yield to external forces, has emerged as the next frontier for Vision-Language-Action (VLA) models. However, existing VLAs output purely kinematic commands, degrading performance on real-world contact-rich tasks. In this paper, we introduce CompVLA, a unified VLA framework that jointly predicts motion and a stiffness matrix from RGB and language inputs. Our approach augments the conventional architecture with a dedicated Compliance Expert, which outputs time-varying stiffness and virtual displacement profiles executed via geometric impedance control. We demonstrate that CompVLA achieves the highest average success rate across diverse contact-rich tasks, outperforming both vanilla and compliance-aware VLA baselines, with ablations confirming each component is essential.

0.48