CS Paper Radar

Compliance for Free: Learning Identifiable Impedance via Bilateral Teleoperation

Harsha Guda, Adrià Colomé, Carme Torras

cs.RO ·submitted 2026-09-17 09:49 UTC · v1

Abstract

Vision-language-action models tell a robot where to move, but not how hard to push. Contact-rich tasks depend on that second quantity, compliance, yet no widely used demonstration interface records it. The obstacle is identifiability as realized pose and measured force cannot separate the operator's intended equilibrium from their stiffness, so VR controllers, SpaceMouse and handheld grippers cannot supply compliance supervision even in principle. Prior compliance-output policies work around this with hand-specified task structure, privileged simulation contact state, or dedicated force and tactile hardware. Four-channel bilateral teleoperation removes the ambiguity directly by using the leader arm as a separate measurement of the intended equilibrium, making per-axis stiffness identifiable by regression using only the joint-torque sensing already on the manipulator. This yields per-timestep, direction-dependent compliance labels at zero annotation cost, which we use to fine-tune a VLA to emit stiffness alongside pose. On a Franka Research 3 wiping task, ours is the only policy of five whose contact force changes when the instruction asks for a firm wipe rather than a normal one (6.4N (normal) to 9.1N (firm) RMS, Cohen's d = 0.89, p = 0.023

Closest papers

Nearest neighbours by meaning across the whole index.

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.77
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.77
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Residual Compliant Policy: Learning Compliant Policies from Few Demonstrations

cs.RO ·2026-10-01 ·Chunyu Jiang, Yichen Cai, Shuai Li, Wenbin Sun, João Carvalho +4 more
similarity 0.75
Abstract · 9 pages, 6 figures. Project website: https://residual-compliant-policy.github.io

Contact-rich manipulation requires a robot to be precise in free space to establish the intended contacts, and compliant once in contact to avoid excessive forces. Imitation learning has proven effective for simpler manipulation tasks, but the compliance underlying a demonstration is not directly observable and is therefore difficult to infer from demonstration data alone. We present a framework that makes compliance explicit at every stage. During data collection, the operator teleoperates the real robot while a synchronized digital twin visualizes the error between the commanded reference and the achieved pose, making the current compliance visible, and selects between two discrete compliance modes. To generalize across object poses, we combine Laplacian editing, which retargets trajectories efficiently but is not physics-consistent during contact, with simulation-based trajectory optimization, which enforces physical plausibility but offers no manual guidance. Finally, a residual reinforcement learning policy refines the interaction forces by adjusting the reference pose of the underlying admittance controller. We evaluate on three flipping and pushing tasks on a Franka FR3 based on a total of 7 demonstrations across tasks. Our method is successful on all 40 out-of-distribution trials, compared to 33/40 and 24/40 for two baselines, with our base policy alone reaching 35/40.

0.27

Force-Modulated Dexterity: Unified Compliance for Contact-Rich Manipulation

cs.RO cs.AI ·2026-10-12 ·Ying Yuan, David Held, Jitendra Malik, Haozhi Qi
code/data similarity 0.72
Abstract · Project page: https://yingyuan0414.github.io/fomo-dex/

Teleoperation is widely used to collect high-quality demonstrations for robot learning. Dexterous manipulation, however, requires coordinated control of motion and contact forces. Operators can specify motion, but struggle to reproduce the subtle force adjustments of human manipulation without feeling the robot's contacts. We introduce Force-Modulated Dexterity (FOMO-Dex), a unified compliance formulation for contact-rich manipulation. FOMO-Dex expresses nominal actions in coordinates defined by task geometry and contact structure. It applies force-driven motion corrections along selected directions while leaving the remaining command components unchanged. Across card picking, paper cutting, screwdriving, and nut-and-bolt assembly, FOMO-Dex reduces excessive contact forces compared with stiff control. A user study shows that operators collect more successful demonstration data per hour after brief practice. For policy learning, imitating the corrected actions improves card-picking success over imitating raw operator commands. Policies trained on FOMO-Dex demonstrations also achieve more rotation in nut-and-bolt manipulation and screwdriving than those trained on demonstrations collected with the stiff controller. Videos are shown on https://yingyuan0414.github.io/fomo-dex/ .

0.41

CompVLA: A Variable Compliance Vision-Language-Action Model for Contact-rich Manipulation

cs.RO ·2026-09-20 ·Jongmin Kim, Junsu Ha, Che-Sang Park, Minchang Song, Hyeokju Jeong +3 more
hot direction similarity 0.72
Abstract · Conference on Robot Learning (CoRL) 2026

Contact-rich manipulation, requiring robots to regulate not only motion but also how they yield to external forces, has emerged as the next frontier for Vision-Language-Action (VLA) models. However, existing VLAs output purely kinematic commands, degrading performance on real-world contact-rich tasks. In this paper, we introduce CompVLA, a unified VLA framework that jointly predicts motion and a stiffness matrix from RGB and language inputs. Our approach augments the conventional architecture with a dedicated Compliance Expert, which outputs time-varying stiffness and virtual displacement profiles executed via geometric impedance control. We demonstrate that CompVLA achieves the highest average success rate across diverse contact-rich tasks, outperforming both vanilla and compliance-aware VLA baselines, with ablations confirming each component is essential.

0.48

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.71
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.04

FOMI: A Force-Feedback Manipulation Interface for Teaching Contact-Rich Manipulation

cs.RO ·2026-10-14 ·Yishu Shen, Yiming Luo, Ruilin Wang, Bowen Yang, Shuai Yang +5 more
similarity 0.71
Abstract

Robot-free collection with handheld interfaces enables scalable acquisition of human demonstrations for policy learning. However, existing handheld interfaces often provide limited intuitive force feedback, making contact-rich demonstration collection challenging for human operators. To address this, we present FOMI, a force-feedback manipulation interface with a scissor-shaped mechanism, which transmits object interaction forces directly to the operator's hands through actuation links without force sensors. This intuitive force feedback supports real-time action adjustment during robot-free collection of contact-rich demonstrations. Around FOMI, we build a demonstration collection system that integrates sensor calibration, data acquisition, and synchronization for robot-free collection. By further mapping pose changes and gripper opening of FOMI to robot end-effector poses and gripper commands, the system also supports teleoperation. Across four contact-rich tasks, FOMI improves collection efficiency by approximately 29% and 18% over the best baselines in robot-free collection and teleoperation, respectively. Demonstrations collected with FOMI in both modes enable policies to perform challenging contact-rich manipulation tasks with high success rates.

0.32

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.71
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39