CS Paper Radar

Force-Modulated Dexterity: Unified Compliance for Contact-Rich Manipulation

Ying Yuan, David Held, Jitendra Malik, Haozhi Qi

cs.RO cs.AI ·submitted 2026-10-12 17:37 UTC · v1
code/data

Abstract

Teleoperation is widely used to collect high-quality demonstrations for robot learning. Dexterous manipulation, however, requires coordinated control of motion and contact forces. Operators can specify motion, but struggle to reproduce the subtle force adjustments of human manipulation without feeling the robot's contacts. We introduce Force-Modulated Dexterity (FOMO-Dex), a unified compliance formulation for contact-rich manipulation. FOMO-Dex expresses nominal actions in coordinates defined by task geometry and contact structure. It applies force-driven motion corrections along selected directions while leaving the remaining command components unchanged. Across card picking, paper cutting, screwdriving, and nut-and-bolt assembly, FOMO-Dex reduces excessive contact forces compared with stiff control. A user study shows that operators collect more successful demonstration data per hour after brief practice. For policy learning, imitating the corrected actions improves card-picking success over imitating raw operator commands. Policies trained on FOMO-Dex demonstrations also achieve more rotation in nut-and-bolt manipulation and screwdriving than those trained on demonstrations collected with the stiff controller. Videos are shown on https://yingyuan0414.github.io/fomo-dex/ .

Comment
Project page: https://yingyuan0414.github.io/fomo-dex/

Closest papers

Nearest neighbours by meaning across the whole index.

FOMI: A Force-Feedback Manipulation Interface for Teaching Contact-Rich Manipulation

cs.RO ·2026-10-14 ·Yishu Shen, Yiming Luo, Ruilin Wang, Bowen Yang, Shuai Yang +5 more
similarity 0.80
Abstract

Robot-free collection with handheld interfaces enables scalable acquisition of human demonstrations for policy learning. However, existing handheld interfaces often provide limited intuitive force feedback, making contact-rich demonstration collection challenging for human operators. To address this, we present FOMI, a force-feedback manipulation interface with a scissor-shaped mechanism, which transmits object interaction forces directly to the operator's hands through actuation links without force sensors. This intuitive force feedback supports real-time action adjustment during robot-free collection of contact-rich demonstrations. Around FOMI, we build a demonstration collection system that integrates sensor calibration, data acquisition, and synchronization for robot-free collection. By further mapping pose changes and gripper opening of FOMI to robot end-effector poses and gripper commands, the system also supports teleoperation. Across four contact-rich tasks, FOMI improves collection efficiency by approximately 29% and 18% over the best baselines in robot-free collection and teleoperation, respectively. Demonstrations collected with FOMI in both modes enable policies to perform challenging contact-rich manipulation tasks with high success rates.

0.32

One Demonstration, Many Objects: Generalizing Manipulation via Local Contact Geometry

cs.RO ·2026-09-01 ·Satvik Sharma, Samrat Sahoo, Huang Huang, Fei-Fei Li, Jiajun Wu +2 more
highly cited similarity 0.79
Abstract

Dexterous manipulation with multi-fingered robot hands promises human-level dexterity, but collecting large-scale dexterous robot hand data remains difficult. Learning from human demonstrations has emerged as a scalable alternative to robot teleoperation, providing strong priors on object interaction and contact strategies. Recent sim-to-real RL methods incorporate such priors, but often (i) omit rewards that explicitly incentivize precise contact, yielding weak real-world performance, and/or (ii) generalize poorly to unseen object instances. We propose DemoMimic (Dexterous Motion Mimic), a policy that manipulates objects by focusing on their geometry local to the contact points. Its contact-centric rewards encourage precise contact and improve sim-to-real consistency, yielding a single real-world policy that transfers across objects of varying shape, scale, mass, and friction wherever local contact structure is preserved. Real-world ablations show that DemoMimic achieves 71% success across 16 objects, four tasks, and two robot-hand embodiments, with the smallest sim-to-real drop compared to baselines.

0.37

From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations

cs.RO ·2026-10-06 ·Ruitong Tian, Fang Xu, Noah B. Wilson, Xianyao Li, Eric Jing Du
similarity 0.79
Abstract · 8 pages, 6 figures

Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.

0.19

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.78
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.78
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.78
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.78
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

ReDex: Repairing Sim-to-Real Dexterous Policies by Finger-Level Compliant Interaction

cs.RO ·2026-10-05 ·Jinzhou Li, Hadi Tabatabaee, Kelin Yu, Yuyin Sun, Cheng-Hao Kuo +4 more
similarity 0.77
Abstract

Dexterous manipulation policies trained in simulation often fail to transfer to the real world because of errors in contact timing and force regulation. Yet these policies can retain useful multi-finger coordination for task progression. We propose ReDex, a framework for adapting a simulation-trained base policy to the real world by correcting local contact failures and incorporating tactile feedback. Starting from a proprioception-only base policy, ReDex allows a human operator to physically correct contact failures at selected fingers under compliant control during real-world rollouts, while the frozen base policy continues to control the remaining fingers. These rollouts combine base policy execution, human-corrected finger motion, and fingertip force observations. We reconstruct force-informed targets from these rollouts to train a standalone force-conditioned policy via behavior cloning. This design reduces human correction effort, enables learning of contact regulation from real-world interaction, and introduces force feedback into a proprioception-only policy without tactile simulation or complex full-hand teleoperation. We evaluate ReDex on two challenging, contact-rich dexterous manipulation tasks on real hardware. Compared with sim-to-real transferred base policies, ReDex increases Object Flipping success rate from 14\% to 86\% across two objects and average Screwdriver Rotation progress from 26.0% to 95.3% across three objects.

0.13