CS Paper Radar

Broadband Acoustic Intensity Direction Estimation with Tight-Frame Cardioid Arrays

Akira Omoto

eess.AS ·submitted 2026-09-03 07:49 UTC · v1
unusual

Abstract

This study experimentally investigates source-direction estimation from acoustic intensity using paired cardioid microphones, with particular emphasis on well-balanced arrangements known as tight frames. Impulse responses were measured at 6 or 24 microphone positions, and two opposed-pair spacings were examined. The resulting arrays were evaluated for a single source, coherent interference between waves arriving from two orthogonal directions, and directional tracking in the presence of interfering waves from multiple directions. The results demonstrate broadband acoustic-intensity direction estimation from 50 Hz to 20 kHz, with the 24-microphone arrangement and the shorter spacing generally providing smaller errors.

Closest papers

Nearest neighbours by meaning across the whole index.

Virtual Microphone Array for Direction-of-Arrival Estimation Based on Fiber-Optic Position Sensing

eess.AS ·2026-11-04 ·Sebastian Schwarze, Jiekai Wang, Thomas Kissinger, Stephan Werner
unusual similarity 0.57
Abstract · 11 pages, 7 figures

This paper presents a virtual microphone array approach for estimating the direction of arrival of a sound source using a moving microphone and a stationary reference microphone. The method exploits the microphone motion to generate a time-varying array geometry, using fiber-optic position sensing to reconstruct the trajectory and determine the resulting virtual microphone configurations. For each configuration, the estimated time difference of arrival between the two microphone signals and the corresponding microphone geometry define a hyperboloid representing all possible sound source positions consistent with the time difference. By combining multiple hyperboloid constraints, the direction of arrival can be estimated in azimuth and elevation relative to the microphone coordinate system. In contrast to conventional arrays with fixed geometries and approaches based on predefined microphone trajectories, the proposed method derives the virtual array geometry directly from the measured microphone motion, enabling a spatially distributed virtual array to be formed using only two physical microphones and offering potential for size- and weight-constrained applications. The approach was experimentally evaluated under controlled low-reflection conditions for different source positions, source distances, and signal characteristics. The influence of microphone motion was further examined, and the method was tested with a moving sound source. The results demonstrate the feasibility of direction-of-arrival estimation using a virtual microphone array without requiring a predefined microphone trajectory.

0.29

Neural Array-Generic Direction-of-Arrival Estimation Exploiting Array Transfer Functions

eess.AS ·2026-08-10 ·Mikko Heikkinen, Archontis Politis, Konstantinos Drossos, Tuomas Virtanen
published similarity 0.54
Abstract · Accepted for publication in IWAENC 2026

Direction-of-arrival (DoA) estimation is a key component of multichannel audio processing, yet many deep learning approaches remain tied to the microphone arrays used during training and generalize poorly to unseen devices. This paper proposes an array-generic neural DoA estimation framework using measured or simulated complex directional array transfer functions (ATFs) matched to real-world multi-microphone devices. The method processes multichannel spectrograms and ATF metadata with separate convolutional encoders, fuses the resulting representations through cross-attention, and predicts source directions using a multi-source Cartesian vector output formulation. Experiments on simulated 2D and 3D localization tasks under reverberation and diffuse babble noise show that the proposed approach generalizes to previously unseen arrays, including mobile-phone-like configurations, without major performance degradation, while remaining competitive with conventional and learning-based baselines.

0.49

GAMF: Learned and Analytical Array Transfer Function Matching for Array-Generic Direction-of-Arrival Estimation

eess.AS ·2026-09-28 ·Zhiheng Jin, Shichao Hu, Chunyang Xu, Mengyao Zhu
similarity 0.53
Abstract

Microphone positional encoding supports cross-array direction-of-arrival (DOA) estimation, but coordinates alone cannot fully describe device shadowing or microphone directivity. We propose a Generalizable ATF Matching Framework (GAMF) for DOA estimation across array geometries and microphone counts, using array transfer functions (ATFs) as acoustic descriptors. The learned branch incorporates ATF embeddings into geometry-conditioned neural estimation to match acoustic observations with candidate directions. The analytical branch performs normalized ATF matching adapted from generalized steered response power. A hybrid configuration combines their scores through adaptive gating. Simulations across array configurations show that both learned and hybrid configurations outperform a representative positional-encoding-based neural baseline, remain competitive with analytical ATF matching in clean, low-reverberation scenes, and substantially improve upon it under stronger noise or reverberation. On eight-microphone LOCATA Task 1 recordings, the hybrid configuration outperforms the evaluated state-of-the-art baselines for three-dimensional DOA estimation, achieving mean errors of $3.76^\circ$ for three-dimensional DOA and $2.87^\circ$ for azimuth.

0.08

Location-based Training with Complementary Folded Linear Orderings for Multichannel Speech Separation

eess.AS ·2026-09-11 ·Kaixuan Yang, Stijn Kindt, Nilesh Madhu
published similarity 0.52
Abstract · Accepted by IWAENC 2026

Location-based training (LBT) effectively resolves the output permutation problem in multichannel speech separation by imposing deterministic spatial orderings. For planar microphone arrays, LBT typically adopts circular azimuth ordering to cover the full spatial range. However, the resulting cyclic topology introduces a discontinuity at the wrap-around point, increasing learning complexity and limiting the effective use of spatial cues. This work investigates this limitation by introducing location-based training with folded linear orderings (LBT-FLOs), which collapse circular azimuths into controlled linear orderings. While individual LBT-FLOs exhibit front-back ambiguity, each provides enhanced spatial discriminability over specific azimuth regions. Exploiting their complementarity, we propose an ensemble-style framework that selects among multiple LBT-FLOs using azimuth-guided scoring. Experiments across planar array geometries and reverberant conditions show modest but consistent improvements over circular-ordering LBT, with robustness to azimuth estimation errors.

0.37

Geometry-Conditioned Target Speaker Extraction based on spatial features incorporating acoustic propagation principles

eess.AS ·2026-10-21 ·Jiatong Li, Simon Doclo
similarity 0.51
Abstract

Recently, spatially selective non-linear filter (SSF) was proposed for target speaker extraction, utilizing the direction-of-arrival (DOA) of the target speaker as a spatial cue. To overcome its dependency on a fixed microphone array geometry, geometry-conditioned SSF (GCSSF) was proposed, which maps the target DOA and the microphone positions into abstract high-dimensional embeddings using positional encoding. As an alternative to these high-dimensional embeddings, in this paper we propose utilizing two spatial features incorporating acoustic propagation principles for geometry conditioning: 1) the steering vector of the target speaker, which captures inter-microphone phase differences, and 2) a spatial mask based on GCC-PHAT, which quantifies presence of the target speaker per time-frequency bin. These features are used as input to a geometry-conditioning encoder and integrated via a FiLM layer into the GCSSF system. Experimental results on circular and random arrays demonstrate that conditioning with spatial features improves target extraction performance compared to abstract high-dimensional embeddings, maintaining a clear performance advantage across a wide range of target DOA errors.

0.19

Dual-Microphone Steerable High-Order Neural Differential Beamformer

eess.AS ·2026-09-22 ·Weilong Huang, Emanuël A. P. Habets
similarity 0.51
Abstract · Accepted to the IEEE International Workshop on Acoustic Signal Enhancement (IWAENC) 2026

Linear arrays of omnidirectional microphones produce beampatterns that are symmetric about the array axis. For these arrays, a beamformer is considered steerable if its beampattern maintains the same shape in the semicircular plane across all look directions from 0° to 180°. For dual-microphone arrays, conventional differential beamformers are generally non-steerable and restricted to first-order, which significantly limits spatial selectivity. To address these limitations, this study presents a neural differential beamformer (NDBF) with a dual-microphone array. The contributions are as follows: (i) NDBF is steerable; (ii) NDBF achieves high-order frequency-invariant beampatterns; and (iii) NDBF enables stereo recording using only two closely spaced omnidirectional microphones. Experimental results demonstrate that NDBF outperforms existing methods while overcoming the limitations of classical differential beamforming.

0.31

SPATEX: Array-Flexible Multichannel-to-Multichannel Target Speech Extraction using Direction Clue

eess.AS ·2026-11-02 ·Wen Wen, Changda Chen, Yu Xi, Haoyu Li, Qiang Zhou +5 more
code/data similarity 0.50
Abstract · Submitted to ICASSP 2027

Multichannel-to-multichannel target speech extraction (MIMO TSE) aims to recover the target speech signal at each microphone while preserving interchannel spatial information. However, existing MIMO TSE systems generally assume a fixed microphone configuration, limiting their applicability to recording devices with varying microphone configurations. In this work, we propose SPATEX, the first array-flexible MIMO TSE framework that reconstructs microphone-wise target speech signals across microphone counts and array geometries. Given microphone coordinates and a target direction-of-arrival (DOA), SPATEX combines geometry-aware channel exchange and shared temporal attention to jointly reconstruct microphone-wise target signals while maintaining permutation equivariance. Experiments show that SPATEX outperforms array-flexible single-output baselines under most test conditions and consistently improves extraction quality and spatial fidelity over fixed-array MIMO baselines. Ablation studies further validate the benefits of temporal coordination and spatial supervision, while additional evaluations demonstrate robustness to target DOA errors. Our code and dataset are available at https://github.com/Wenanzhi/SPATEX.

0.33

Direction-preserving Spatial Audio Signal Enhancement in The Spherical Harmonic Domain

eess.AS ·2026-10-07 ·Huawei Zhang, Jihui Aimee Zhang, Huiyuan June Sun, Prasanga Samarasinghe
published similarity 0.49
Abstract · Accepted by the 55th International Congress & Exposition on Noise Control Engineering (INTER-NOISE 2026)

Spatial audio signal enhancement (SASE) aims to separate a desired soundfield from interference and noise while preserving its spatial cues. However, existing algorithms pay limited attention to preserving the spatial cues of the residual interference, which reduces their effectiveness in practical applications. In this paper, we propose a direction-preserving SASE algorithm based on multi-output beamforming. The proposed algorithm extracts the desired soundfield while preserving the spatial cues of both the desired soundfield and the residual interference soundfield. The simulation study shows that the proposed algorithm achieves performance comparable to the existing SASE algorithm in terms of estimation error, while it better preserves the spatial cues of the residual interference within a region of interest, in a noisy and reverberant environment.

0.25