CS Paper Radar

Plant Growth Estimation with a Camera-Based Vegetation Index Mapping System for Agricultural Ground Vehicles

Lukas Pindl, Michael Maier, Timo Oksanen

eess.IV ·submitted 2026-09-03 14:00 UTC · v1

Abstract

This work presents a camera-based sensor for mapping plant growth over an agricultural field. The sensor can be used on ground-based vehicles like a tractor and relies on RTK-GNSS to correctly merge many multispectral images onto one map. NDVI is used as an index to estimate plant growth, but the approach can be used with other indices as well depending on the camera. The images from the camera are projected onto the estimated ground plane using perspective projection. This computationally simple approach allows for real-time processing of all images on the field even with low-end hardware. The results are compared to a commercially established vehicle-mounted sensor. Absolute values are hard to compare, but both sensors show similar trends. The camera-based approach also allows for filtering of ground and non-ground areas, potentially reducing the impact of crop density on the average measured NDVI.

Closest papers

Nearest neighbours by meaning across the whole index.

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.62
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

Performance evaluation of super-resolution techniques for characterization and phenotyping of commodity crops using multispectral imagery

cs.CV ·2026-11-02 ·Abhiram Karukayil, João F. C. Mota, Mateo Vásquez-Guevara, Tito Arevalo-Ramirez, Fernando Auat Cheein
published similarity 0.62
Abstract · Published in Advanced Intelligent Systems

Multispectral imagery provides spectral information beyond the visible range for vegetation monitoring, but it typically suffers from limited spatial resolution, which can obscure fine crop structures and affect vegetation-index (VI) estimates.} This study evaluates whether single-image super-resolution (SISR) methods developed for red, green, and blue (RGB) imagery can enhance the spatial resolution of red, green, and near-infrared (RGN) crop images while preserving spectral fidelity. Eight pretrained methods are applied directly to RGN images without fine-tuning: bicubic and nearest-neighbor interpolation, Real-ESRGAN, HAT, HiT-SR, SRFormer, ResShift, and StableSR. Reconstruction at $4\times$ and $16\times$ is evaluated for whole images and manually segmented leaf regions. Reconstruction quality is assessed using mean absolute error (MAE), peak signal-to-noise ratio (PSNR), structural similarity index (SSIM), spectral angle mapper (SAM), and erreur relative globale adimensionnelle de synthèse (ERGAS). Eight VIs, computed from reference and super-resolved images, are evaluated using MAE, PSNR, and SSIM. Transformer-based methods \modification{significantly} outperform GAN- and diffusion-based approaches in both evaluation settings \modification{($p < 0.001$)}, with \modification{HAT, HiT-SR, and SRFormer forming the highest-performing statistical tier}. These findings indicate that RGB-trained SISR can enhance spatial detail in RGN crop imagery while maintaining spectral consistency and VI reliability for high-resolution crop phenotyping.

0.32

Combining Object Detection with Geometry-Aware Clustering to Distinguish Overlapping Plants in UAV Imagery

cs.CV ·2026-09-18 ·Ik Jae Lee, Hieu D. Nguyen, Mahbubur Meenar, Carlos Morrison Martinez, Cameron Connelly
similarity 0.60
Abstract · 34 pages

Reliable plant-level information from unmanned aerial vehicle (UAV) imagery is important for automated crop monitoring. However, in dense crop canopies, adjacent plants frequently overlap and are detected as a single object, reducing the reliability of plant-level measurements. This study presents a geometry-aware post-detection framework for resolving overlapping plant instances using standard RGB UAV imagery. The framework combines object detection with geometric clustering of plant components. Leaves or branches detected within each bush-level region are represented using two complementary geometric features: component centroids and radial intersection points (RIPs) derived from detected plant structures. K-means and Gaussian mixture models determine whether a detected region contains a single plant or two overlapping plants. Density filtering suppresses spurious radial intersections, and a post-pipeline ensemble combines spatial and directional geometric information. The framework was evaluated using UAV imagery of eggplant and tomato crops under field conditions. Centroid-based clustering achieved an F1-score of 0.89 for eggplant, while the combined centroid-RIP approach achieved the best tomato performance, with an accuracy of 0.80, precision of 1.00, and F1-score of 0.75 using K-means. Density filtering substantially improved RIP-based clustering for tomato. The proposed approach provides a lightweight, modular engineering solution that can be integrated with existing RGB UAV monitoring pipelines without additional depth sensors, pixel-level segmentation, three-dimensional reconstruction, or retraining of the primary bush detector. The results demonstrate that geometric reasoning applied to existing detector outputs can complement deep-learning-based object detection and improve plant-level interpretation in dense agricultural canopies.

0.27

A Comparative Evaluation of Deep Learning Object Detection Models on a Real-World Multi-Plant Dataset from Africa

cs.CV cs.AI ·2026-08-11 ·Ismail Ismail Tijjani, Sunusi Muhammad Ibrahim, Amina Ibrahim Khaleel, Lanre Olusegun Akinola, Fatima Isa Jibrin +3 more
similarity 0.58
Abstract

The application of computer vision in agriculture has shown significant potential for improving crop monitoring and precision farming. However, many existing approaches rely on controlled datasets that do not adequately represent realworld farming conditions, particularly in underrepresented regions such as Africa. This study presents a comparative evaluation of six object detection models YOLOv5, YOLOv8, YOLO11, YOLO26, Faster R-CNN, and RT-DETR using a real-world dataset, AgriAISeg 1 , collected manually from Nigerian farms. AgriAISeg comprises 3,382 images of sesame, cabbage, and tomato crops captured under varying environmental conditions, including changes in illumination, occlusion, and viewing perspectives. Models were trained, and performance was assessed using precision, recall, mAP@0.5, and mAP@0.5:0.95. The results show that RT-DETR achieved the highest overall performance with a precision of 0.768 and mAP@0.5:0.95 of 0.624, while YOLOv8 and YOLO11 also demonstrated strong and consistent performance. In contrast, Faster R-CNN recorded significantly lower accuracy, with an overall mAP@0.5 of 0.466, indicating reduced effectiveness under complex field conditions. In addition, YOLO-based models exhibited superior training efficiency compared to Faster R-CNN.These findings demonstrate that modern one-stage and transformer-based detectors provide more reliable and efficient solutions for plant detection in realworld agricultural environments.

0.04

A Flexible ROI Analysis Tool for Spatially Consistent Vegetation Index Extraction from Turfgrass Imagery

cs.CV ·2026-10-19 ·Kibon Ku, Thai Thanh Tuan, Jinhyun Ahn
code/dataunusual similarity 0.58
Abstract · 15 pages, 4 figures, 2 tables

Time-series multispectral imaging is widely used to assess turfgrass condition; however, extracting plot-level vegetation index (VI) values remains labor-intensive when camera positions vary between acquisitions and automated plot tracking is unreliable. We developed an open-source software tool comprising (i) a graphical user interface (GUI) for the interactive placement of orientation-adjustable regions of interest (ROIs) with $N$-way subdivision to match plot geometry and (ii) a batch-processing script that computes plot-level mean VI values from single-band floating-point rasters and exports measurements and ROI coordinates in JSON format for reuse. Saved coordinates can be reapplied to measure NDVI, NDRE, and SAVI from identical pixel regions within a single time point without re-delineating ROIs. In a demonstration using rail-mounted multispectral turfgrass imagery (18 images), plot-level mean values were extracted in a single session, with coordinates reused directly for NDRE and SAVI rasters. The system reads non-georeferenced pixel-coordinate rasters natively, does not require GIS expertise, and supports reproducible VI quantification where static sensor deployment is impractical.

0.36

Autonomous Agricultural Tractor: Integrated Weed Detection and LiDAR Navigation for Precision Paddy Farming

cs.RO cs.CV ·2026-08-19 ·Benjamin Merryman-Smith, Tony Nguyen, Bilal Dogutas, Krish Shah, Anthony Raphael +1 more
similarity 0.57
Abstract

Site-specific weed management in paddy farming offers substantial reductions in herbicide use over conventional broadcast spraying, but field deployment has been limited by three persistent challenges: robust crop-row navigation under canopy where GNSS degrades, real-time visual discrimination between rice and morphologically diverse weeds, and the asymmetric cost of misclassifying rice as weed, which is irreversible. This paper presents AgriNav, an integrated autonomous tractor system built around four ROS-coupled modules: a custom PyTorch reimplementation of WeedDet for rice detection, a parallel lightweight 1.68M-parameter CNN-FPN variant with asymmetric class weighting, an inverted-logic discrimination module that protects the rice class through a hardcoded confidence-gate veto, and a 6-state constant-velocity-turn-rate Extended Kalman Filter fusing GNSS, IMU, and wheel odometry with three-level outage bridging. Our primary system-level contribution is a four-mechanism LiDAR-camera fusion bridge that uses the navigation LiDAR for region-of-interest constraint, world-coordinate projection, ground-plane filtering, and bidirectional confidence fusion at zero additional hardware cost. Simulation experiments demonstrate continuous position tracking through a 20-second GNSS outage, crop row detection confidence above 0.9 throughout operation, and rice-detection confidences from 0.32 to 0.95 across paddy, aerial, and post-flood imagery. The LiDAR ROI constraint reduces detection inference region by an estimated 30 to 50 percent.

0.23

Deep Learning for Forest Plantation Mapping in Godavari Districts of Andhra Pradesh, India

eess.IV cs.LG ·2026-10-14 ·Snehal More, Anuj Karpatne, Valerie A. Thomas, Randolph H. Wynne
published similarity 0.57
Abstract

Small-area forest plantations play a vital role in the socioeconomic well-being of farmers in Southeast Asia. Most plantations are established on former agricultural land, often on land less suitable for agriculture. Plantations that are converted from natural forest have adverse impacts on biodiversity. Mapping small-area plantations is thus important to understand the dynamics of forest cover in Southeast Asia and to study the social, economic, and ecological effects of this important land cover and land use change. While the small size of forest plantations makes it difficult to detect them using moderate resolution satellite sensors, the problem is exacerbated by the high degree of mixing between plantations, surrounding vegetation, and other land covers, which often show variegated responses in satellite signals across space and time. In this paper, we study the problem of mapping small-area forest plantations in East and West Godavari districts of Andhra Pradesh, India using deep learning methods. Remotely sensed cloud-free data from the Harmonized Landsat Sentinel-2 S10 product were classified using a pixel-level neural network and training data labeled using a field-based survey in concert with expert aerial photo interpretation. We compare the performance of deep learning methods with a baseline random forest classifier in our study region of 21543 sq. km over a period of 3 years and analyze the differences in the results across land cover classes and seasons.

0.29

A Remote Approach to Cashew Orchard Detection: Leveraging Active Learning with Satellite Imagery in Guinea-Bissau

cs.CV cs.LG ·2026-08-12 ·Miguel Pereira, Sofia C. Pereira, Maria J. P. Vasconcelos, Patrícia Guedes, Luke L. Powell +1 more
similarity 0.55
Abstract · 29 pages, 12 figures

Cashew production is a widespread economic activity in Guinea-Bissau, as well as other countries in West Africa. However, unregulated cashew production can be directly associated with increasing regionwide deforestation rates, biodiversity losses, and a fragile economic structure. There is no nationwide database for listing or georeferencing cashew orchards, so there is a clear need to remotely map their locations. In recent years, multiple methods for detecting orchards have been developed, though they have only been applied on a regional level. This work expands regional analyses to a nationwide scale. It develops a scalable and cost-effective remote approach, based on Sentinel-2 satellite imagery, using Machine Learning techniques to detect cashew orchards automatically. Margin-based Active Learning techniques were employed to develop an optimal training set in terms of the number of points and their informativeness, leading to a cashew map with 94.0% balanced accuracy obtained entirely off-site. We created two datasets and a 2021 cashew map with 10m spatial resolution that are openly accessible through GitHub. The results demonstrate the possibility of a broader cashew orchard mapping, creating a new stepping stone for this environmental application.

0.10